Zipp 303 Firecrest Carbon Tubeless Rear WheelEngineered to meet the demands of modern road bike adventures, this rear wheel features a hookless carbon rim construction, which allows it to deliver incredibly fast and smooth rolling performance. Zipp has equipped this model with tubeless tyre compatibility, so you can enjoy the benefits of superior stability and control as well as a lighter overall weight. Another highlight of this version is its disc brake compatibility, which means that you'll benefit from powerful and consistent braking performance during the most unpredictable of road conditions.Zipp's 303 Firecrest Tubeless Disc-brake rear wheel is designed for the real world… a world of imperfect conditions, road surfaces, and elements where the bottom line is simple. Efficiency = speed. It's faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced: Wind resistance, rolling resistance, rider fatigue, weight. Designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 30mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tyre, boosting aero efficiency on the road. The wide rim stance also features less tyre deflection for reduced rolling resistance. The combination of the wider tyre, increased tyre volume, and lower tyre pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tyre and wheel system absorbs the shaking, not the rider. At the centre of the 303 Firecrest Tubeless Disc brake rear wheel is a versatile and durable hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless Disc-brake rear wheel is for dedicated cyclists who aspire to the latest in technology. Its competitors… in races, against peers, or simply conquering personal limits. This is about becoming faster and matching your motivation to the most advanced technology.Features: Rim Material: Hookless Carbon Tyre Compatibility: Tubeless tyres only Brake Compatibility: Disc (Center Lock) Rim Inside Width: 25mm Rim Profile: Symmetrical Rim Finish: UD fibre, adhesive decals Nipple Material: Aluminium Spoke Type: CX-Ray Spoke Count: 24 Spoke Pattern: 2 Cross Driver Body Type: Multiple options available to select Axle Type: TA 12x142 Bearings: Cartridge - Steel Driver Mechanism: 6 Pawls Leaf Spring Weight: 842g (approx)Technologies: Zipp graphics and cosmetic identity that scream speed Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile Lighter Weight than its predecessor, making it nimble and fast Tubeless Made Easy, optimised tyre bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tyre Ultra-wide 25mm rim profile creates a better tyre interface to be fast on or off the road 40mm rim depth makes a light and aero wheel in every situation ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement Center locking rotor interface. Lockring is included with the wheels XDR or SRAM/Shimano driver bodies Campagnolo driver body sold separatelyBuy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 353 NSW Carbon TL Rear Road Disc Wheel Offering increased stiffness, strength and an overall lower weight, this road bike rear wheel features a high-quality carbon hookless rim construction for conquering the demands of modern road cycling. Developed for greater versatility and speed, it's equipped with many of Zipp's finest performance-enhancing technologies including a Sawtooth rim shape and Total System Efficiency (TSE) that offer reduced wind resistance, rolling resistance and gravity vibration losses. Coming kitted out with 45mm deep rim shape, this model delivers fantastic speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. Tubeless, Hookless Road Bike Rear WheelThe 353 NSW is Zipp's lightest tubeless wheel yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving the brand's mission of Making You Faster. With hookless, the transition between the tyre and the rim is more seamless and aerodynamic. Zipp's hookless rims have more efficient resin distribution, which results in a lighter and highly durable rear wheel. Thanks to its 25mm internal rim width, its ideal for running wider tubeless tyres at reduced air pressure for improved stability, greater comfort and fewer chances of flats or punctures.Sawtooth Rim Shape with HyperFoilsZipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimises aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but remain lightweight, which will help you snap out of corners and maintain your speed no matter the terrain. Centre Lock Disc Brake CompatibilityReady for clocking up the miles, this rear wheel is equipped with Centre Lock disc brake compatibility, so riders can enjoy powerful and consistent braking operation wherever their ride takes them. This makes the Zipp 353 NSW Carbon TL Disc Center Lock Rear 2021 a great choice of upgrade for faster, smoother and more dependable performance on your road bike.Features: Rim Material: Carbon Rim Finish: Unidirectional (UD) Fibre Rim Graphics: Impress technology Axle Size: 12x142mm Use: Road Inner Rim Width: 25mm Rim Depth: 45mm Rim Shape: Symmetrical, Sawtooth Rim Profile: Hookless, Tubeless Clincher Hub: Cognition V2Freehub Compatibility: Multiple options available to select Drive Side Spoke Length: 258mm, 266mm Non Drive Side Spoke Length: 264mm, 266mm Size: 700c Tyre Compatibility: Tubeless tyres only Brake Compatibility: Centre Lock disc brake Single or Pair: Single Lifetime warranty Weight: 675gTechnologies: Impress: Zipp has employed ImPress graphics technology on this model, which prints graphics directly on the wheel, to help allow the dimples to do what they were design to do - help control vortex shedding, the rate at which air sheds off the wheel. Managing this is crucial to stability. Sawtooth: SawTooth is the name given to Zipp NSW's patented variable depth 53/58mm rims. Developed utilising the principles of the emerging science of biomimicry, Zipp engineers began the rigorous aero development process of SawTooth utilising the wind tunnel, CFD, and real-world testing. The result is a rim shape that takes nature's most elegant design solutions and combines engineering precision to deliver a wheel that performs unlike any made before. This patented rim shape achieves something conventional aero wheels cannot; it simultaneously reduces both aerodynamic drag and side force for the ultimate in AeroBalance. Sawtooth accomplishes this with a series of patented fin-shaped Hyperfoil nodes along the inner diameter of the rim that work together with HexFin ABLC dimples for improved airflow. The result is Zipp's highest performing wheel ever released with both aero-drag reduction and reduced side force at all wind yaw angles. This is important because higher wind yaw angles are where bike handling is most affected by the wind. Hyperfoil: Hyperfoil is the name given to the individual nodes on Zipp NSW variable depth Sawtooth rims. Each of these patented structures features Zipp's HexFin ABLC dimples that help to stabilize handling in gusting wind by increasing wind vortex shedding frequency. The higher frequency vortex shedding produced by Sawtooth creates a greater number of smaller, less powerful, yet more predictable vortices leading to greater wheel stability. This added stability translates into greater rider control, thereby saving energy that is typically expended trying to hold a line in gusting wind. The result is a faster, more confident riding experience whether you are laying down power or descending sinuous mountain roads.Hexfin ABLC: HexFin ABLC dimples are the hexagonally shaped depressions found at each Hyperfoil of our Sawtooth shaped NSW rims. The angular shape of each dimple increases boundary layer mixing to help keep airflow attached to the rim for reduced aerodynamic drag and improved stability in crosswinds. To further improve the effectiveness of the hexagonal dimples, they are arranged in fin-shaped clusters made up of variable sized dimples that work in concert with each Hyperfoil of a Sawtooth rim.Axial Clutch: With Cognition's Axial Clutch technology, Zipp reduced drag by disengaging the ratchet mechanism when coasting. With less internal hub drag a rider can pedal less when drafting in a headwind, achieve higher speeds when coasting in an aero tuck, or opt to stop pedalling a moment sooner before entering a corner and bank that wattage for use exiting the corner. Axial Clutch technology also allows riders to maintain speed through corners that don't require braking input, thereby increasing corner exit speeds. Inside the Axial Clutch mechanism Zipp use magnets, rather than steel springs, to move and engage the lightweight Metal Injection Molded (MIM) ratchet rings for unmatched reliability and consistent operation. With 36 points of engagement that all interlock simultaneously, there isn't a more secure freehub mechanism on the market. TSE Technology: Zipp's TSE Technology (Total System Efficiency) was developed by its engineers in the Nest Advanced Development Lab in Indy. This approach to carbon-wheel manufacturing means the wheel's precise rim layup results in greater all-around efficiency for greater speed through reduced: Wind resistance, rolling resistance and gravity (weight + durability) vibration losses.Manufacturer's Part Numbers: Shimano HG 10/11 speed: ZPWH8613000 SRAM XD 10/11/12 speed: ZPWH8613001Buy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 353 NSW Carbon TL Rear Road Disc Wheel Offering increased stiffness, strength and an overall lower weight, this road bike rear wheel features a high-quality carbon hookless rim construction for conquering the demands of modern road cycling. Developed for greater versatility and speed, it's equipped with many of Zipp's finest performance-enhancing technologies including a Sawtooth rim shape and Total System Efficiency (TSE) that offer reduced wind resistance, rolling resistance and gravity vibration losses. Coming kitted out with 45mm deep rim shape, this model delivers fantastic speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. Tubeless, Hookless Road Bike Rear WheelThe 353 NSW is Zipp's lightest tubeless wheel yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving the brand's mission of Making You Faster. With hookless, the transition between the tyre and the rim is more seamless and aerodynamic. Zipp's hookless rims have more efficient resin distribution, which results in a lighter and highly durable rear wheel. Thanks to its 25mm internal rim width, its ideal for running wider tubeless tyres at reduced air pressure for improved stability, greater comfort and fewer chances of flats or punctures.Sawtooth Rim Shape with HyperFoilsZipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimises aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but remain lightweight, which will help you snap out of corners and maintain your speed no matter the terrain. Centre Lock Disc Brake CompatibilityReady for clocking up the miles, this rear wheel is equipped with Centre Lock disc brake compatibility, so riders can enjoy powerful and consistent braking operation wherever their ride takes them. This makes the Zipp 353 NSW Carbon TL Disc Center Lock Rear 2021 a great choice of upgrade for faster, smoother and more dependable performance on your road bike.Features: Rim Material: Carbon Rim Finish: Unidirectional (UD) Fibre Rim Graphics: Impress technology Axle Size: 12x142mm Use: Road Inner Rim Width: 25mm Rim Depth: 45mm Rim Shape: Symmetrical, Sawtooth Rim Profile: Hookless, Tubeless Clincher Hub: Cognition V2Freehub Compatibility: Multiple options available to select Drive Side Spoke Length: 258mm, 266mm Non Drive Side Spoke Length: 264mm, 266mm Size: 700c Tyre Compatibility: Tubeless tyres only Brake Compatibility: Centre Lock disc brake Single or Pair: Single Lifetime warranty Weight: 675gTechnologies: Impress: Zipp has employed ImPress graphics technology on this model, which prints graphics directly on the wheel, to help allow the dimples to do what they were design to do - help control vortex shedding, the rate at which air sheds off the wheel. Managing this is crucial to stability. Sawtooth: SawTooth is the name given to Zipp NSW's patented variable depth 53/58mm rims. Developed utilising the principles of the emerging science of biomimicry, Zipp engineers began the rigorous aero development process of SawTooth utilising the wind tunnel, CFD, and real-world testing. The result is a rim shape that takes nature's most elegant design solutions and combines engineering precision to deliver a wheel that performs unlike any made before. This patented rim shape achieves something conventional aero wheels cannot; it simultaneously reduces both aerodynamic drag and side force for the ultimate in AeroBalance. Sawtooth accomplishes this with a series of patented fin-shaped Hyperfoil nodes along the inner diameter of the rim that work together with HexFin ABLC dimples for improved airflow. The result is Zipp's highest performing wheel ever released with both aero-drag reduction and reduced side force at all wind yaw angles. This is important because higher wind yaw angles are where bike handling is most affected by the wind. Hyperfoil: Hyperfoil is the name given to the individual nodes on Zipp NSW variable depth Sawtooth rims. Each of these patented structures features Zipp's HexFin ABLC dimples that help to stabilize handling in gusting wind by increasing wind vortex shedding frequency. The higher frequency vortex shedding produced by Sawtooth creates a greater number of smaller, less powerful, yet more predictable vortices leading to greater wheel stability. This added stability translates into greater rider control, thereby saving energy that is typically expended trying to hold a line in gusting wind. The result is a faster, more confident riding experience whether you are laying down power or descending sinuous mountain roads.Hexfin ABLC: HexFin ABLC dimples are the hexagonally shaped depressions found at each Hyperfoil of our Sawtooth shaped NSW rims. The angular shape of each dimple increases boundary layer mixing to help keep airflow attached to the rim for reduced aerodynamic drag and improved stability in crosswinds. To further improve the effectiveness of the hexagonal dimples, they are arranged in fin-shaped clusters made up of variable sized dimples that work in concert with each Hyperfoil of a Sawtooth rim.Axial Clutch: With Cognition's Axial Clutch technology, Zipp reduced drag by disengaging the ratchet mechanism when coasting. With less internal hub drag a rider can pedal less when drafting in a headwind, achieve higher speeds when coasting in an aero tuck, or opt to stop pedalling a moment sooner before entering a corner and bank that wattage for use exiting the corner. Axial Clutch technology also allows riders to maintain speed through corners that don't require braking input, thereby increasing corner exit speeds. Inside the Axial Clutch mechanism Zipp use magnets, rather than steel springs, to move and engage the lightweight Metal Injection Molded (MIM) ratchet rings for unmatched reliability and consistent operation. With 36 points of engagement that all interlock simultaneously, there isn't a more secure freehub mechanism on the market. TSE Technology: Zipp's TSE Technology (Total System Efficiency) was developed by its engineers in the Nest Advanced Development Lab in Indy. This approach to carbon-wheel manufacturing means the wheel's precise rim layup results in greater all-around efficiency for greater speed through reduced: Wind resistance, rolling resistance and gravity (weight + durability) vibration losses.Manufacturer's Part Numbers: Shimano HG 10/11 speed: ZPWH8613000 SRAM XD 10/11/12 speed: ZPWH8613001Buy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 353 NSW Carbon TL Front Road Disc Wheel This road bike front wheel features a high-quality carbon hookless rim construction, which offers increased stiffness, strength and an overall lower weight as you conquer the demands of modern road cycling. Developed for greater versatility and speed, it's equipped with many of Zipp's finest performance-enhancing technologies including a Sawtooth rim shape and Total System Efficiency (TSE) that offer reduced wind resistance, rolling resistance and gravity vibration losses. Coming kitted out with 45mm deep rim shape, this model delivers fantastic speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. Tubeless, Hookless Road Bike Front WheelThe 353 NSW is Zipp's lightest tubeless wheel yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving the brand's mission of Making You Faster. With hookless, the transition between the tyre and the rim is more seamless and aerodynamic. Zipp's hookless rims have more efficient resin distribution, which results in a lighter and highly durable front wheel. Thanks to its 25mm internal rim width, its ideal for running wider tubeless tyres at reduced air pressure for improved stability, greater comfort and fewer chances of flats or punctures.Sawtooth Rim Shape with HyperFoilsZipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimises aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but remain lightweight, which will help you snap out of corners and maintain your speed no matter the terrain. Centre Lock Disc Brake CompatibilityReady for clocking up the miles, this front wheel is equipped with Centre Lock disc brake compatibility, so riders can enjoy powerful and consistent braking operation wherever their ride takes them. This makes the Zipp 353 NSW Carbon TL Disc Centre Lock Front 2021 a great choice of upgrade for faster, smoother and more dependable performance on your road bike.Features: Rim Material: Carbon Rim Finish: Unidirectional (UD) Fibre Rim Graphics: Impress technology Axle Size: 12x100mm Use: Road Inner Rim Width: 25mm Rim Depth: 45mm Rim Shape: Symmetrical, Sawtooth Rim Profile: Hookless, Tubeless Clincher Hub: Cognition V2 Drive Side Spoke Length: 258mm, 266mm Non Drive Side Spoke Length: 264mm, 266mm Size: 700c Tyre Compatibility: Tubeless tyres only Brake Compatibility: Centre Lock disc brake Single or Pair: Single Lifetime warranty Weight: 580gTechnologies: Impress: Zipp has employed ImPress graphics technology on this model, which prints graphics directly on the wheel, to help allow the dimples to do what they were design to do - help control vortex shedding, the rate at which air sheds off the wheel. Managing this is crucial to stability. Sawtooth: SawTooth is the name given to Zipp NSW's patented variable depth 53/58mm rims. Developed utilising the principles of the emerging science of biomimicry, Zipp engineers began the rigorous aero development process of SawTooth utilising the wind tunnel, CFD, and real-world testing. The result is a rim shape that takes nature's most elegant design solutions and combines engineering precision to deliver a wheel that performs unlike any made before. This patented rim shape achieves something conventional aero wheels cannot; it simultaneously reduces both aerodynamic drag and side force for the ultimate in AeroBalance. Sawtooth accomplishes this with a series of patented fin-shaped Hyperfoil nodes along the inner diameter of the rim that work together with HexFin ABLC dimples for improved airflow. The result is Zipp's highest performing wheel ever released with both aero-drag reduction and reduced side force at all wind yaw angles. This is important because higher wind yaw angles are where bike handling is most affected by the wind. Hyperfoil: Hyperfoil is the name given to the individual nodes on Zipp NSW variable depth Sawtooth rims. Each of these patented structures features Zipp's HexFin ABLC dimples that help to stabilize handling in gusting wind by increasing wind vortex shedding frequency. The higher frequency vortex shedding produced by Sawtooth creates a greater number of smaller, less powerful, yet more predictable vortices leading to greater wheel stability. This added stability translates into greater rider control, thereby saving energy that is typically expended trying to hold a line in gusting wind. The result is a faster, more confident riding experience whether you are laying down power or descending sinuous mountain roads. TSE Technology: Zipp's TSE Technology (Total System Efficiency) was developed by its engineers in the Nest Advanced Development Lab in Indy. This approach to carbon-wheel manufacturing means the wheel's precise rim layup results in greater all-around efficiency for greater speed through reduced: Wind resistance, rolling resistance and gravity (weight + durability) vibration losses.Manufacturer's Part Number: ZPWH8612000Buy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 404 Firecrest Carbon TL Disc CL FrontIdeal for road, time trial or triathlon racing, this front wheel features a high-quality carbon rim construction for an excellent balance of stiffness, strength and an overall low weight on your ride. Zipp has also kitted out this model with some of its finest technologies including a hookless tubeless rim profile that's perfect for modern racing. This means you'll enjoy tubeless benefits such as the ability to run lower tyre pressures for increased stability, comfort and fewer chances of flats or punctures. Another highlight is its Centre-Lock disc brake compatibility, which allows for powerful and consistent braking performance as you maintain your momentum.Carbon Front Wheel with Hookless, Tubeless Rim ProfileThe 404's heritage as Zipp's icon of speed extends back decades, and its future is even brighter. At 58mm deep, the 404 Firecrest Tubeless is ideal for road races, time trial and triathlon, gran fondos, and riding over varied terrain. This wheel's 23mm internal width is perfect for running wider tubeless tyres at reduced air pressure, while its use of hookless (straight side) rims is integral to Making You Faster. With hookless, the transition between the tyre and the rim is more seamless and aero. Zipp's hookless rims also have more efficient resin distribution, which results in a lighter, stronger wheel.Total System Efficiency and ABLC Sawtooth TechnologyReady for racing, this front wheel is equipped with Zipp's Total System Efficiency (TSE) technology, which is an approach to speed on ever-changing roads and riding conditions. Specifically, TSE focuses on overcoming specific barriers to speed such as wind resistance, gravity, rolling resistance, and vibration losses. With the addition of ABLC Sawtooth technology, this model also uses an intricate dimpling pattern to improve aero efficiency. Coming complete with a German-engineered ZR1 DB hub that's versatile and durable, the Zipp 404 Firecrest Carbon TL Disc CL Front wheel is a great choice of upgrade for road riding and racing.Features: Rim Material: Carbon, hookless Rim Finish: Unidirectional (UD) fibre, adhesive decals Axle Size: 12x100mm thru-axle Use: Road, Triathlon and Time Trial Rim Profile: Symmetrical Inner Rim Width: 23mm Max Outside Width: 28mm Rim Depth: 58mm Wheel Size: 700c Tubeless Ready: Yes, tubeless-ready hookless design Tyre Compatibility: Tubeless tyres only (hookless) Max Tyre Pressure: 73psi Brake Type: Centre Lock disc brake Hub: ZR1 Disc Brake Axle Material: Aluminium Nipple Material: Aluminium Nipple Anti-Rotation: Sapim Secure-Loc Spoke Type: CX-Ray Spoke Count: 24 Spoke Pattern: 2 cross Drive Side Spoke Length: 254mm Non-Drive Side Spoke Length: 252mm Bearings: Cartridge Steel bearings Surface Texture: ABLC SawTooth Single or Pair: Single front wheel Max Recommended Rider Weight: 250lbs Weight: 839gTechnologies: Versatile aero wheel for the modern road bike with tubeless and hookless rim profile. Optimized tyre bed for easy tyre installation. Wide 23mm rim profile creates a better tyre interface to be fast on or off the road. ZR1 DB hub is engineered in Germany with a better seal design for improved durability and quicker response with 66 points of engagement. Centre locking rotor interface. Lifetime warranty.Buy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 404 Firecrest Carbon TL Disc CL RearEngineered for performance, this rear wheel features a high-quality carbon rim construction for an excellent combination of stiffness, strength and an overall low weight on your ride. Zipp has also kitted out this model with some of its finest technologies including a hookless tubeless rim profile that's perfect for modern road, time trial or triathlon racing. This means you'll enjoy tubeless benefits such as the ability to run lower tyre pressures for increased stability, comfort and fewer chances of flats or punctures. Another highlight is its Centre-Lock disc brake compatibility, which allows for powerful and consistent braking performance as you maintain your momentum.Carbon Rear Wheel with Hookless, Tubeless Rim ProfileThe 404's heritage as Zipp's icon of speed extends back decades, and its future is even brighter. At 58mm deep, the 404 Firecrest Tubeless is ideal for road races, time trial and triathlon, gran fondos, and riding over varied terrain. This wheel's 23mm internal width is perfect for running wider tubeless tyres at reduced air pressure, while its use of hookless (straight side) rims is integral to Making You Faster. With hookless, the transition between the tyre and the rim is more seamless and aero. Zipp's hookless rims also have more efficient resin distribution, which results in a lighter, stronger wheel.Total System Efficiency and ABLC Sawtooth TechnologyReady for racing, this rear wheel is equipped with Zipp's Total System Efficiency (TSE) technology, which is an approach to speed on ever-changing roads and riding conditions. Specifically, TSE focuses on overcoming specific barriers to speed such as wind resistance, gravity, rolling resistance, and vibration losses. With the addition of ABLC Sawtooth technology, this model also uses an intricate dimpling pattern to improve aero efficiency. Coming complete with a German-engineered ZR1 DB hub that's versatile and durable, the Zipp 404 Firecrest Carbon TL Disc CL Rear wheel is a great choice of upgrade for road riding and racing.Features: Rim Material: Carbon, hookless Rim Finish: Unidirectional (UD) fibre, adhesive decals Axle Size: 12x142mm thru-axle Use: Road, Triathlon and Time Trial Rim Profile: Symmetrical Inner Rim Width: 23mm Max Outside Width: 28mm Rim Depth: 58mm Wheel Size: 700c Tubeless Ready: Yes, tubeless-ready hookless design Tyre Compatibility: Tubeless tyres only (hookless) Max Tyre Pressure: 73psi Brake Type: Centre Lock disc brake Hub: ZR1 Disc Brake Freehub: Multiple options available to select Axle Material: Aluminium Nipple Material: Aluminium Nipple Anti-Rotation: Sapim Secure-Loc Spoke Type: CX-Ray Spoke Count: 24 Spoke Pattern: 2 cross Drive Side Spoke Length: 248mm Non-Drive Side Spoke Length: 252mm Bearings: Cartridge Steel bearings Surface Texture: ABLC SawTooth Single or Pair: Single rear wheel Max Recommended Rider Weight: 250lbs Weight: 981gTechnologies: Versatile aero wheel for the modern road bike with tubeless and hookless rim profile. Optimized tyre bed for easy tyre installation. Wide 23mm rim profile creates a better tyre interface to be fast on or off the road. ZR1 DB hub is engineered in Germany with a better seal design for improved durability and quicker response with 66 points of engagement. Centre locking rotor interface. Lifetime warranty.Buy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp 454 NSW Carbon TL Rear Road Disc WheelDelivering fantastic speed, comfort and durability on every mile, this road bike rear wheel is equipped with a high-quality carbon rim construction and some of Zipp's finest technologies. Featuring a Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern, this model is engineered for top aero and crosswind-stability performance with an undulating 53/58mm rim depth. Wind tunnel, CFD and real-world tested, its patented shape achieves something conventional aero wheels cannot by simultaneously reducing both aerodynamic drag and side force for the ultimate in AeroBalance.Tubeless Ready Carbon Road Bike Rear WheelZipp's ultimate all-around speed weapon is now tubeless ready. This means you get all of the aero advantages of the 454 NSW Tubeless Disc-brake wheel with the added benefit of increased cornering grip and compliance with reduced rolling resistance. Its 19mm internal width is also optimised for running wider tubeless tyres at reduced air pressure for improved stability, greater comfort and fewer chances of flats or punctures.Centre Lock Disc Brake CompatibilityReady for wherever your next ride takes you, this rear wheel is kitted out with Centre Lock disc brake compatibility for powerful and consistent braking operation. Keeping you in full control of the ride, the Zipp 454 NSW Carbon TL Disc Brake CLock Rear 2021 is a perfect upgrade for riders who want to enjoy greater speed, aerodynamics and an overall lighter weight on their road bike.Features: Rim Material: Carbon Rim Finish: Unidirectional (UD) Fibre Rim Graphics: Impress Technology Axle Size: 12x142mm Use: Road Rim Type: Clincher Rim Profile: Symmetrical with Hooks Inner Rim Width: 19mm Hub: Cognition DB with scalloped edge hubshell design Freehub: Multiple options available to select Drive Side Spoke Length: 248mm, 254mm Non Drive Side Spoke Length: 252mm, 254mm Tyre Compatibility: Tube-type or tubeless tyres Tubeless Ready: Yes Size: 700c Brake Compatibility: Centre Lock disc brake Single or Pair: Single Weight: 955gTechnologies: Cognition Hub: With the Cognition hub's Axial Clutch technology, Zipp reduced drag by disengaging the ratchet mechanism when coasting. So you can approach corners at higher speeds, and ultimately, save time. A star-flanged straight-pull hubshell design on the rear hub distributes the load placed on the hub flange away from the bearings. Zipp also developed a unique scalloped edge hubshell design for the front hub (front wheel available separately). This scalloped design maintains the bearing bore diameter when high radial spoke tension is applied. That means you get bearings that quietly stay in place, roll faster, last longer, and provide a laterally stiffer hub. Impress: Zipp has employed ImPress graphics technology on this model, which prints graphics directly on the wheel, to help allow the dimples to do what they were design to do - help control vortex shedding, the rate at which air sheds off the wheel. Managing this is crucial to stability. Sawtooth: SawTooth is the name given to Zipp NSW's patented variable depth 53/58mm rims. Developed utilising the principles of the emerging science of biomimicry, Zipp engineers began the rigorous aero development process of SawTooth utilising the wind tunnel, CFD, and real-world testing. The result is a rim shape that takes nature's most elegant design solutions and combines engineering precision to deliver a wheel that performs unlike any made before. This patented rim shape achieves something conventional aero wheels cannot; it simultaneously reduces both aerodynamic drag and side force for the ultimate in AeroBalance. Sawtooth accomplishes this with a series of patented fin-shaped Hyperfoil nodes along the inner diameter of the rim that work together with HexFin ABLC dimples for improved airflow. The result is Zipp's highest performing wheel ever released with both aero-drag reduction and reduced side force at all wind yaw angles. This is important because higher wind yaw angles are where bike handling is most affected by the wind. Axial Clutch: With Cognition's Axial Clutch technology, Zipp reduced drag by disengaging the ratchet mechanism when coasting. With less internal hub drag a rider can pedal less when drafting in a headwind, achieve higher speeds when coasting in an aero tuck, or opt to stop pedalling a moment sooner before entering a corner and bank that wattage for use exiting the corner. Axial Clutch technology also allows riders to maintain speed through corners that don't require braking input, thereby increasing corner exit speeds. Inside the Axial Clutch mechanism Zipp use magnets, rather than steel springs, to move and engage the lightweight Metal Injection Molded (MIM) ratchet rings for unmatched reliability and consistent operation. With 36 points of engagement that all interlock simultaneously, there isn't a more secure freehub mechanism on the market. XDR Freehub Option: The XDR driver body option is available to select separately. It is a universal mounting system for cassettes that incorporate cogs with fewer than 11 teeth. It allows for lighter and more versatile drivetrains without requiring new rear axle standards, cassette tools or hub redesigns. The XDR interface is 1.85mm longer than XD and is designed for road hub applications. XDR driver bodies are compatible with all XD cassettes when the cassette is installed with a 1.85mm spacer.Manufacturer's Part Numbers: Shimano/SRAM 10/11 speed: ZPWH8617000 SRAM XD XDR 10/11/12 speed: ZPWH8617001Buy Zipp Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp Tangente Platinum Pro Carbon Rim Brake PadsMade for carbon rims, these Brake Pads from Zipp offer enhanced stability and control when braking in all weather conditions.Please Note: The Tangente Platinum Pro Evo Brake Pad is designed for use on carbon rims and has not been approved for use on aluminium braking surfaces. One pair supplied in a pack.Features:A 10 per cent increase in surface area than the previous pad model for greater max braking powerA 1mm thinner design provides improved clearance with integrated brakesDespite a reduced thickness, its increased radial height increases pad lifeIncreased radial height also spreads heat over larger "swept area" of the rim for lower peak temperNew groove design sweeps water off the rim for improved wet-weather braking performanceUniquely formulated compound manages the extreme temperatures that can result from heavy braking on carbon rimsBrake Type: V-BrakeHow many pads included: Pair of pads includedBuy Zipp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp Tangente Platinum Pro Carbon Rim Brake PadsMade for carbon rims, these Brake Pads from Zipp offer enhanced stability and control when braking in all weather conditions.Please Note: The Tangente Platinum Pro Evo Brake Pad is designed for use on carbon rims and has not been approved for use on aluminium braking surfaces. One pair supplied in a pack.Features:A 10 per cent increase in surface area than the previous pad model for greater max braking powerA 1mm thinner design provides improved clearance with integrated brakesDespite a reduced thickness, its increased radial height increases pad lifeIncreased radial height also spreads heat over larger "swept area" of the rim for lower peak temperNew groove design sweeps water off the rim for improved wet-weather braking performanceUniquely formulated compound manages the extreme temperatures that can result from heavy braking on carbon rimsBrake Type: V-BrakeHow many pads included: Pair of pads includedBuy Zipp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp VukaBull Base BarOffering an excellent balance of stiffness, strength and low weight performance for time trial (TT) and triathlon racing, this race-ready base bar comes kitted out with a high-quality unidirectional carbon construction. Its 31.8mm clamp diameter, clip-on aero bar compatibility and 30cm width (centre to centre), makes it fully equipped for both training and racing.Zipp's Vuka Bull base bar is the perfect starting point for triathletes and time trial specialists building a high-tech aero cockpit. It's packed with innovations for fit, function, and speed. For aerodynamic efficiency, the carbon Vuka Bull utilises the watt-saving wing shape of Zipp's SL-70 Aero bar. Its design is also based on feedback from professional bike fitters, so athletes can maintain optimal aero position.Carbon Base Bar for Time Trial and Triathlon RacingThe Vuka Bull is designed to be wide enough to help you control your bike in corners, and climb comfortably, but narrow enough to not slow you down when you are in the aerobars focusing on fast. The clamping area is wide enough to allow a wide range of armrest positions using the Zipp Vuka Clip. The Vuka Bull features a flip design that allows it a rise or drop allowing you to have your hands where you need them. This available rise provides athletes with the option to keep the base bar as low as possible while still being able to raise the armrests and extensions where they need to be. Also, a slightly higher hand position can help athletes climb steeper grades.The Vuka Bull is designed with Zipp's Rapid Route technology, now with the ability to move control cables, hoses, and wires through the stem clamp area, making it compatible with modern integrated cockpit systems.Features: Material: Unidirectional Carbon Use: Road, Time Trial (TT) and Triathlon Clamp Diameter: 31.8mm Width (Centre to Centre): 38cm Clamp Width: 120mm Drop (HB): 20mm Brake Lever Compatibility: Plug style Clip Compatible: YesTechnologies: - Wide enough for control narrow enough to keep you aero. - Designed to allow you to find your fastest position. - Aerodynamic wing shape designed using the CFD-proven wing shape from the SL-70 Aero. - Rapid Routing cable exits are positioned for easy installation of brake cables, now with routing through the stem clamp area. - Updated Zipp cosmetics that scream speed, matte carbon with gloss black logo.Manufacturer's Part Number: ZPAB8173000 Black 38cm 20mm DropBuy Zipp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp Service Course SL70 XPLR HandlebarFeaturing a tough aluminium construction, this versatile drop handlebar offers excellent durability for road cycling and gravel adventure riding. Zipp has also kitted out this model with a distinctive matte finish that's nano-blasted for increased stiffness and strength as you tackle demanding mixed gravel terrain conditions. Benefitting from comfortable geometry that includes a three-degree backsweep, a 70mm reach and a 115mm drop, this is a perfect choice for conquering a wide range of road and gravel routes.Aluminium Drop Bar for Road and Gravel RidingThis is Zipp's innovative all-road handlebar, the Service Course SL 70 XPLR. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle, from paved roads onto gravel, mud, dirt, and even singletrack. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal “comfort zone” position for hours of rough riding over mixed terrain. Today's riders demand a few things out of their cockpit, whether they are doing a two hour training ride from home or a 200 mile gravel adventure, comfort, control, and the ability to carry what they need. Zipp met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics, outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward.Features: Material: AL7050 Aluminium Finish: Matte Use: Road, Gravel Clamp Diameter: 31.8mm Bend: Reach: 70mm; Drop: 115mm Backsweep: 3 degrees Ramp Angle: 10 degrees Outsweep: 11 degrees Weight: 260gTechnologies: Distinctive Zipp cosmetics. 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops postion. 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods. Ergonomic top with 3° backsweep. Matte Black nano blast aluminium. Lifetime warranty from Zipp.Manufacturer's Part Numbers: ZHB8197000 Matte Black 40cm ZHB8197001 Matte Black 42cm ZHB8197002 Matte Black 44cm ZHB8197003 Matte Black 46cmBuy Zipp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp Service Course SL SeatpostSuitable for both road cycling and gravel adventure riding, this versatile seatpost offers special shock-absorbing properties and increased comfort. Zipp has also put this model through a strict mountain bike (MTB) strength test, so you can enjoy offroad durability and support on your road or gravel bike. Benefitting from a unidirectional (UD) carbon construction, it delivers the best balance of stiffness, strength and low weight performance as you conquer every mile of road. Another highlight is its AL7075 aluminium head and robust steel hardware, which ensures a tight and secure hold to your saddle rails whatever the terrain conditions.Adjustable Carbon SeatpostThe carbon Service Course SL seatpost is specifically tuned to be more shock-absorbing than the “comfort” seatposts on the market, while still passing Zipp's strict internal MTB strength test. Flex engineered into the lightweight carbon tube keeps the rider comfortable over any terrain. Better fit means better performance, and if your saddle is out of position, you'll waste energy with every pedal stroke. The secure, two-bolt clamp makes for easy micro-adjustments of saddle position, and the head has been redesigned for maximum bolt head accessibility. With 0mm and 20mm setback options to choose from, it's possible for nearly any rider to achieve the perfect fit, and the clamp works with all saddle rail types.Features: Seatpost Material: Unidirectional (UD) Carbon Head Material: AL7075 Aluminium Hardware Material: Steel Finish: Matte with stealth graphics Use: Road, Gravel Length: 400mmTechnologies: Distinctive Zipp cosmetics. Unidirectional Carbon fibre tuned for ride comfort. Lightweight clamping system. Lifetime manufacturer's warranty.Manufacturer's Part Numbers: ZSP8056000 Matte Black 31.6mm x 400mm 20mm Setback ZSP8056001 Matte Black 25.4mm x 400mm 20mm Setback ZSP8056002 Matte Black 27.2mm x 400mm 20mm Setback ZSP8057000 Matte Black 31.6mm x 400mm 0mm Setback ZSP8057001 Matte Black 25.4mm x 400mm 0mm Setback ZSP8057002 Matte Black 27.2mm x 400mm 0mm SetbackBuy Zipp Components from Chain Reaction Cycles, the World's Largest Online Bike Store.