This high-quality E-bike rim is perfect for off-road riding as it features 4D angled spoke drilling, which eliminates binding and lateral loading, and disperses tension more evenly over a greater area. Ready for hitting the trails, this model's symmetric outer profile offers equal dissipation of impact forces on both sides, while its asymmetric spoke hole drilling allows for even spoke tension and increased wheel strength. Durable, Thick Walled Rim E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs and more descents. With all those “mores” also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, WTB designed its HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on WTB's standard rims, which WTB then paired with its proven I-Beam centre support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. Tubeless Ready E-Bike Rim TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed and dependable tubeless system. Manufacturer's Part Numbers: W020-0603 Black 32H 27.5" 32H W020-0604 Black 32H 29" 32H
Dial-in your Seatpost for the Terrain Ahead A wireless dropper seatpost guarantees more fun and more safety on technical trails by letting you instantly dial-in your saddle height to suit the terrain ahead, with its 150mms of smooth travel. Once you navigate the technical section, one flick of a finger will set your saddle back to its perfect: that's optimal riding efficiency from this Magura Vyron Elect Wireless Remote Dropper. Wireless Operations Remote The Magura Vyron Elect Wireless Remote Dropper Post utilises Magura's eLECT Remote with ANT+ wireless technology. You can mount the wireless remote on either side of your cockpit. If you also have a Magura suspension fork and/or shock unit with eLECT functions on your bike, you can choose what you prefer: one eLECT remote for the Vyron wireless dropper post and another for forks and/or shock(s) – or you can use all three buttons on a single remote to control every aspect. That's full bike control at the touch of a button. Rechargeable Battery This wireless dropper seatpost has a rechargeable battery that needs topping up after approximately 400 actuations. It contains a motion sensor that puts it to sleep mode to save battery power when the bike is not moving. The battery will recharge from empty in around 3 hours via the micro USB port.
This superb tool is designed to specifically loosen and tighten your lockring's ring in the chainring mounting. Additionally, it comes in handy if you need to remove your spider or sprocket to gain access to your e-bikes motor.
QM 7 Adaptor: 203mm PM 6” fork mount Adapts Post-mount (PM) caliper to Post-mount (PM) fork mount (6") for use with 203mm rotor Includes Mounting Bolts Weight: 34g QM 10 Adaptor: 180mm IS rear frame mount Adapts Post-mount (PM) caliper to International Standard (IS) rear mount; for use with 180mm rotor Includes Mounting Bolts Weight: 37g QM 11 Adaptor: 160mm IS 6” fork mount + 203mm 8” Fox 40 fork mount Adapts Post-mount (PM) caliper to International Standard (IS) fork mount (8"/203mm, e.g. Fox 40), and adapts PM caliper to IS front fork for 160mm rotor This bracket works for both fork and rear-frame mounting Includes Mounting Bolts Weight: 30g QM 12 Adaptor: 180mm IS 6” fork mount + 160mm IS rear frame mount (not PM) Adapts Post-mount (PM) caliper to International Standard (IS) fork mount (6"/160mm) for use with 180mm rotor in front, and adapts PM caliper to IS frame rear for 160mm rotor This bracket works for both fork and rear-frame mounting Includes Mounting Bolts Weight: 30g QM + 20 Adaptor: 180mm/PM 6” 160mm/PM 5” Includes Mounting Bolts
Easy-to-fit, this simple adapter presses on to your remote to improve the size and angle of your switch, for a more confident dropping performance.
One look is enough as the amazing design says it all: the Storm will set a new benchmark when it comes to weight, performance and durability. Combining the wealth of experience and the latest results of Mission Performance, Magura have achieved a maximum of stopping power, control and ventilation at a reduced weight (10% weight saving compared to old model).
The superb Magura Storm HC rotor ensures you'll enjoy superb braking performance from your bike's brakes under high braking power. It also comes with T25 mounting screws.
These superb brakes feature TPA technology for tool-less pad wear adjustment and are completed by EBT technology for super easy bleeding. Additionally, their flip-flop design provides super-fast installation while its lightweight 2-finger aluminium lever blade makes it a master of its class. This is ideal for replacing your old or existing model, so you can enjoy smooth and powerful braking performance.
There are two options available to select: Magura Centerlock Lockring for QR Axle Part Number: 2701373 Magura Centerlock Lockring for TA Axle Part Number: 2701374
This top-quality Magura mini service kit contains everything you need to bleed your Magura disc brakes so they'll perform at their best again.
Optimised for use on e-bikes, this brake disc rotor provides enhanced performance and stability, while also reducing vibrations. The MDR-C rotor is the all-rounder in the Magura e-bike optimised portfolio, for city, trail and e-bike. An additional rigid element above the 6-hole mounting reduces vibration during braking, resulting in less noise. Heat resistance and stability have also been enhanced. Manufacturer's Part Numbers: 2701918 Silver 180mm 2701919 Silver 203mm 2701917 Silver 160mm
Magura O-Rings for banjo hose fitting.