Whether it's a mountain bike shred session, a speedy road ride or a tough trail run, you and your kit will soon start to get sweaty. And with sweat comes odour. But fear not, the Anti-Odour Spray (250ml) removes odour-producing bacteria, eliminating the smells that can form over time if left untreated. The easy-to-apply spray is ideal for removing odour caused by bacteria from body armour, shoe lining, gloves, pads or any soft material, synthetic fibre or textile that comes into contact with your skin. This hygienic finish is also long-lasting, leaving a fresh smell for up to 10 washes, and the spray bottle is easy to use at home or when you're on your travels. Product Details: Storage Store in a cool, dry place. Do not freeze or allow to frost. Use in a well-ventilated area Safety Information Keep out of reach of children DO NOT USE ON ANY HEADWEAR INCLUDING HELMET LINERS. DANGER: Causes serious eye damage IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. FIRST AID: after inhalation: Supply fresh air; consult a doctor in case of complaints. CONTAINS: Docusate sodium, Ethanol, Silver Chloride
Simply spray the Rain Shield Re-Proofer on a garment and you'll enjoy restored factory-level waterproof performance within 24 hours of application. The waterproofing technology reduces surface tension, letting water bead and roll off the surface. You'll also find it protects against mud and ground-in stains. And not only that, but it won't compromise the breathability of your garment either. It achieves all this protection while being safe for the environment, thanks to a water-based and PPCF-free formula. How To: 1. Shake the bottle well before use to activate the formula. 2. Spray all over a clean, damp garment from 10-15cm away until the garment is fully treated. (Recommended using a technical performance wash to clean the garment before application. Always follow the washing instructions on the label.). Muc-Off recommends spraying in a well-ventilated, dry area. 3. Remove any excess treatment with a clean cloth. 4. Allow treatment to cure. Air dry by hanging up and leave to dry overnight before wearing the garment in wet conditions again. 5. The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so it's recommended to refresh the coating every 3 months depending on wear and washing. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric then it is time to refresh with a re-proofer. Best applied to a clean, damp garment for optimum results.
Your outdoor activities, be it mountain biking, road biking, running or hiking, are tough on your technical kit, what with all the muck and grime. But Technical Wash (300ml) is perfect for refreshing those garments and extending the life of your outdoor kit. It's ideal for use on any waterproof/water-repellent fabric, including Gore-Tex®, Polartec®, Pertex®, eVent®, softshell and hardshell clothing. Shake it up and use 25ml (5 x 5ml/0.16oz capfuls) per wash load for best results to keep your garments fresh, made with a biological PPC-free formula that's safe for the planet and your garments. How To: 1. Place garments to be washed into your washing machine. 2. Shake the bottle well to activate the formula. 3. Use 25ml (5 x 5ml/0.16oz capfuls) per wash load.4. Dispense Technical Wash for Apparel directly into the detergent drawer of your washing machine, in place of normal washing detergent. 4. Wash on a full cycle at 30°C/86°F or according to care label instructions. 5. Allow garments to air-dry. Top Tip If washing water-repellent/waterproof garments It's recommended to re-treating with Muc-Off Wash-In or Spray-On Rain Shield ReProofer after the wash to restore the water-repellent finish. Follow the directions for use on the bottle for application details.
Muc-Off's Indoor Training Kit has got bigger and better. It is packed with everything you need to keep clocking up indoor miles during winter or rainy days. Use Muc-Off's Antibacterial Equipment Cleaner to make your indoor sufferfest sessions germ-free, and their Luxury Chamois Cream to keep chafing away. While Sweat Protect will keep your bike in top-notch condition by stopping rust and corrosion, no matter how much sweat you throw at it. Even when you’re riding at home, a well-lubed drivetrain is essential for smooth shifting and lasting performance. Muc-Off's epic C3 Ceramic Dry Lube will do the trick, and marginal gains even make you faster in the virtual world. To round it all off, Muc-Off is throwing in a Microfibre Cloth for polishing your steed, and a Muc-Off Tote Bag to keep everything together, plus it looks stylish too. Features: Sweat Protect - 300ML The end of corrosion caused by sweat on your training equipment For use all over indoor trainers and all gym equipment Prevents and stops corrosion on metal surfaces Integral tracer dye – aids accurate application to ensure total protection Antibacterial Equipment Cleaner - 500ML Kills 99.99% of germs Effective against enveloped viruses Lasts longer than alcohol-based sanitisers Luxury Chamois Cream - 100ML Enriched with natural Aloe Vera, Witch Hazel, Shea Butter and Sunflower Oil Contains provitamins Has a mild cooling function C3 Dry Weather Ceramic Lube - 50ML Provides the ultimate drivetrain performance Ceramic coating for increased drive chain protection Synthetic polymers for long-distance performance Incredible durability Pipette system for easy application Includes UV torch to check for 100% coverage Premium Microfibre Cloth Effortless cleaning, drying and polishing power at your fingertips Eliminates smears and blemishes with ‘split-fibre’ technology Muc-Off Tote Bag Looks stylish Keeps all your essentials in one handy place
Available in multiple size options for MTB, gravel and road cycling disciplines, the Muc-Off Tubeless Valves are a perfect choice of upgrade for quick and easy inflation. With each valve stem and cap made from aircraft-grade 7075 machined aluminium, they provide excellent durability and strength on demanding terrains without adding any unnecessary excess grams to your ride. Muc-Off has also equipped them with an anodised finish for a distinctive look and an additional layer of wear resistance and protection against corrosion during wetter riding conditions. Valve Core Removal Tool included. Boasting a unique Muc-Off design that's stronger and lighter than before, these Muc-Off Tubeless Presta Valves are also easier to use thanks to their machined six slot channel in the base. These slots allow your tyre to be inflated easier and can be used with most tubeless tyre foam inserts, allowing your tubeless sealant fluid and air to flow freely. Supplied with three sets of different shaped rubber inserts to fit a variety of rim shapes and create the perfect value to rim seal. In The Box - 2x 7075 aluminium tubeless Presta valves - 2x Valve caps - 2x Locking nuts - 1x Valve core removal tool (doubles as a spare valve cap) - 3x Pairs of rubber bases for size choice Technologies: Tougher Than Ever: Made with 7075 aircraft-grade aluminium to be lighter and stronger to endure the harshest terrain. Tyre Insert Air Flow System: Featuring 6 slots machined into the base of the valve stem allowing them to be compatible with most tubeless tyre inserts and allow your tubeless sealant fluid and air to flow freely when running tubeless tyre inserts. Manufacturer's Part Numbers: 20420 Black 44mm 20430 Black 60mm 20421 Orange 44mm 20431 Orange 60mm 20422 Green 44mm 20432 Green 60mm 20423 Purple 44mm 20433 Purple 60mm 20424 Red 44mm 20434 Red 60mm 20425 Blue 44mm 20435 Blue 60mm 20426 Gold 44mm 20436 Gold 60mm 20427 Pink 44mm 20437 Pink 60mm 20428 Silver 44mm 20438 Silver 60mm 20429 Multi Iridescent 44mm 20439 Multi Iridescent 60mm
Specifically developed for the demands of downhill (DH), trail or enduro riding, this kit includes a 10m roll of Muc-Off tubeless rim tape, seal patches, CNC-machined black tubeless valves, valve caps, locking nuts, a valve core removal tool, three pairs of rubber bases and two pouches of No Puncture Hassle Tubeless Sealant. As a result, you'll have everything needed to get a tubeless-ready wheelset set up and ready to roll. Tubeless Rim Tape The Muc-Off Tubeless Rim tape is made from their own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy. No Puncture Hassle Tubeless Sealant This tubeless sealant features cutting-edge molecules that fill bigger holes and tears, while the advanced latex forms a strong seal instantly. Muc-Off's formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Its formula seals holes up to 6mm and lasts up to six months. Developed with the world's top downhillers and pro peloton teams, to give you the finest tyre sealant available. This downhill/trail/enduro option is non-corrosive and easily washes off with water. Compatible with tubeless-ready and full UST wheels/tyres, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. The pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top-ups on the go! Please note: This kit is specifically designed for downhill, trail and enduro riding disciplines and is ideal for rim widths of 28-30mm. Technologies: Going Tubeless?: Muc-Off Ultimate Tubeless Setup Kit is a one-stop shop for everything you need to make the switch with your tubeless-ready wheelset. Rim Tape: Get off to the right start by using Muc-Off Tubeless Rim Tape to line your rims and create a durable, airtight seal. The kit includes a 10m roll of Rim Tape and seal patches. No More Leaks: Keep frustrating leaks and flat tyres at bay by setting up your ride with a pair of Muc-Off's black Tubeless Presta valves. No Puncture Hassle: Fill up your stealthy ride with No Puncture Hassle Tubeless Sealant and you’re ready to roll. With two 140ml pouches that will fit in your ride pack and attach straight to your Presta valve to keep the stoke levels high. Manufacturer's Part Number: 20086 Black/Pink 28-30mm
The No Puncture Hassle 5L from Muc-Off is made from a robust, puncture proof formula that keeps your tyres running perfectly after a puncture. Compatible with tubeless ready and full UST wheels/tyres, No Puncture Hassle 5L works from 15psi-120psi and temperatures from -20°C to +50°C. The unique formula contains microfibre molecules to fill larger tears and holes plus the advanced latex forms a secure seal when you need it most. Thanks to the UV detection system, you can see any punctures that weren't noticeable previously for maximum protection. The 5L version of No Puncture Hassle is the perfect solution to keep in your home workshop for keeping your bike in peak condition. With the addition of the included pump dispenser, you can easily seal your tyres more accurately and efficiently than before, without leaving any unnecessary waste behind. Developed by the world's top pro peloton and downhill teams with the goal of making the best performing sealant possible. Easy to use, the formula is non-corrosive, biodegradable and will wash off. MINIMUM AMOUNT PER TYRE: (add up to 30ml extra for increased protection) Road: 30-45ml (2 to 3 scoops) 26" MTB & 27.5": 60-75ml (4 to 5 scoops) Cross 700c: 60-75ml (4 to 5 scoops) 29" MTB: 105ml-140ml (7 or the whole pouch) Downhill: 120-140ml (8 or the whole pouch) DIRECTIONS FOR USE - 5 LITRE 1. Shake bottle vigorously before use. 2. Put your bike in a work stand if possible. 3. Ideally, use this container to refill our 1 litre bottle or simply use the pump to apply directly into an unseated tyre. 4. Finish by remounting and inflating the tyre in accordance with your manufacturer’s recommendations. 5. Repeatedly spin the wheel, shake it from side to side and hey presto you’re now ready to rock ‘n’ roll! 6. Keep out of reach of children. 7. Dispose of contents/container in accordance with local regulations. 8. Avoid contact with eyes. Do not drink.
This kit includes a 10m roll of Muc-Off tubeless rim tape, seal patches, CNC-machined black tubeless valves, valve caps, locking nuts, a valve core removal tool, three pairs of rubber bases and two pouches of No Puncture Hassle Tubeless Sealant. As a result, you'll have everything needed to get a tubeless-ready wheelset set up and ready to roll. Tubeless Rim Tape The Muc-Off Tubeless Rim tape is made from their own proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy. No Puncture Hassle Tubeless Sealant This tubeless sealant features cutting-edge molecules that fill bigger holes and tears, while the advanced latex forms a strong seal instantly. Muc-Off's formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Its formula seals holes up to 6mm and lasts up to six months. Developed with the world's top downhillers and pro peloton teams, to give you the finest tyre sealant available. This XC/gravel version is non-corrosive and easily washes off with water. Compatible with tubeless-ready and full UST wheels/tyres, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. The pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top-ups on the go! Please note: This kit is specifically designed for XC/Gravel and is ideal for rim widths of 23-25mm. Technologies: Going Tubeless?: Muc-Off Ultimate Tubeless Setup Kit is a one-stop shop for everything you need to make the switch with your tubeless-ready wheelset. Rim Tape: Get off to the right start by using Muc-Off Tubeless Rim Tape to line your rims and create a durable, airtight seal. The kit includes a 10m roll of Rim Tape and seal patches. No More Leaks: Keep frustrating leaks and flat tyres at bay by setting up your ride with a pair of Muc-Off's black Tubeless Presta valves. No Puncture Hassle: Fill up your stealthy ride with No Puncture Hassle Tubeless Sealant and you’re ready to roll. With two 140ml pouches that will fit in your ride pack and attach straight to your Presta valve to keep the stoke levels high. Manufacturer's Part Number: 20085 Black/Pink 23-25mm
Ready for conquering every mile of road, this Muc-Off Tubeless Kit includes a 10m roll of Muc-Off tubeless rim tape, seal patches, CNC-machined black tubeless valves, valve caps, locking nuts, a valve core removal tool, three pairs of rubber bases and two pouches of No Puncture Hassle Tubeless Sealant. As a result, you'll have everything you need to get your tubeless-ready wheelset set up and ready to roll. A kit complete with every essential needed to join the tubeless revolution. Once installed, you'll enjoy better puncture protection and be able to run lower pressures for extra cornering grip. Tubeless Rim Tape The tubeless rim tape in this Muc-Off Ultimate Tubeless Kit is made from this brand's own proprietary performance material with a pressure-sensitive adhesive. It provides just the right amount of stretch whilst maintaining the durability and strength needed to create a lasting airtight seal. The semi-transparent material makes locating the valve hole easy. No Puncture Hassle Tubeless Sealant This tubeless sealant features cutting-edge molecules that fill bigger holes and tears, while the advanced latex forms a strong seal instantly. Muc-Off's formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Its formula seals holes up to 6mm and lasts up to six months. Developed with the world's top downhillers and pro peloton teams, to give you the finest tyre sealant available. This road bike version is non-corrosive and easily washes off with water. Compatible with tubeless-ready and full UST wheels/tyres, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. The pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top-ups on the go! Please note: This kit is specifically designed for road bikes and is ideal for rim widths of 19-21mm. Technologies: Going Tubeless?: Muc-Off Ultimate Tubeless Setup Kit is a one-stop-shop for everything you need to make the switch with your tubeless-ready wheelset. Rim Tape: Get off to the right start by using Muc-Off Tubeless Rim Tape to line your rims and create a durable, airtight seal. The kit includes a 10m roll of Rim Tape and seal patches. No More Leaks: Keep frustrating leaks and flat tyres at bay by setting up your ride with a pair of Muc-Off's black Tubeless Presta valves. No Puncture Hassle: Fill up your stealthy ride with No Puncture Hassle Tubeless Sealant and you’re ready to roll. With two 140ml pouches that will fit in your ride pack and attach straight to your Presta valve to keep the stoke levels high. Manufacturer's Part Numbers: 20084 Black/Pink Deep 60mm 20137 Black/Pink Shallow 44mm
The Soft Pro compound Krayton rubber material and resin thug plug end caps of these ODI Longneck grips set them apart from much of the competition.
Designed in conjunction with Pro Enduro rider Curtis Keene, the ODI Elite Pro mountain bike (MTB) grips provide more padding where you need it most, without the feel of a bulky grip. Their unique offset design allows extra padding to be placed where it is needed most without a bulky feeling grip. This brand has also created a new variable knurl design which provides a softer feel in key areas while still allowing for optimal traction where it is needed most. The ODI Elite Pro Lock-On Grips borrowed their V2.1 Lock-On System from their Motocross line for a secure single-clamp grip that allows for more comfort when riding on the outside of the grip. This updated clamping system also features a larger 3mm bolt head for simplified installation and extra security. Made from proprietary compounds that offer a soft feel with excellent durability and a reinforced outer end for improved grip life. Whether you are looking for more comfort on longer rides or just want a better feel on your short descents, the upated ODI Elite Series grips are a perfect choice.
These high-quality grips are the result of a collaboration with ODI and their good friends at Troy Lee Designs. Produced after making hundreds of drawings and designs, this partnership has created one of the most innovative grips out there. One of the main reasons why this partnership has worked so well is Troy’s approach to design and manufacture. By defying conventional processes, they have managed to develop grips that are ideal for the World’s fastest racers. You can be sure that these ODI Troy Lee grips will catch the eye of your fellow cyclists and competitiors.