The Transition is our lightest glove. Performance and dexterity the top priority. With low weight and a slim profile top of the list on the Transition gloves, a pull-on design was the obvious choice. Based on a tailored fit to give a snug feel they are perfect for an all-day ride or against the clock.The perforated palm allows airflow keeping palms free from sweat build-up and hands fresh.
The Transition glove is our lightest with performance and dexterity the top priority. A favourite of downhill racer Adam Brayton the Transition is perfect for anyone looking to get the best feedback through their grips without sacrificing comfort.Key Features:Pull-On DesignWith low weight and a slim profile top of the list on the Transition gloves, a pull on the design was the obvious choice. Based on a tailored fit to give a snug feel they are perfect for an all-day ride or against the clock.Perforated PalmThe perforated palm allows airflow keeping palms free from sweat build up and hands fresh.Silicone Finger GripOur SevenIDP logo along the end of the index finger keeps braking grip covered in all conditions.
The 7iDP Project glove is a no-compromise, mountain bike specific glove designed for racing and ride performance.Features: Knuckle insert to protect your two outside fingers from trees and shrub impacts,AX 4 way stretch perforated palm,Ripstop 4 way stretch back of hand fabric,Adjustable cuff closure,Moisture-wicking Microfibre thumb panel ,Silicone printed finger and thumb for added grip on gear shifters and brake levers,One-piece Neoprene cuff adds protection and comfort with ease of adjustment.
7iDP Control Gloves are well vented and lightweight. The minimal, ventilated fabric is perfect for warmer days or riders who prefer less 'glove' between them and the bike.
The Transition glove is our lightest, with performance and dexterity the top priority. The Transition is perfect for anyone looking to get the best feedback through their grips without sacrificing comfort.Pull-On DesignWith low weight and a slim profile top of the list on the Transition gloves, a pull-on design was the obvious choice. Based on a tailored fit to give a snug feel they are perfect for an all-day ride or against the clock.Perforated PalmThe perforated palm allows airflow keeping palms free from sweat build-up and hands fresh.Silicone Finger Grip
Designed with valuable feedback from the legend himself, the new Sam Hill Lite signature knee pad is designed to be the ultimate ultra-lightweight knee pad for trail riding and the racer seeking super light protection. The Sam Hill Lite knee pads mould with body heat to provide maximum comfort with a breathable sleeve to wick moisture away from the skin. Unlike many minimalist pads, the Sam Hill Lites pass CE EN1621-1:2012.Key Features:Super Light/super Thin!At just 6mm the Sam Hill Lite Pads are the thinnest CE EN 1621-1:2012 certified pads on the market.Ideal for trail riding or wearing under your race pants the Sam Hill Lites offer comfortable, breathable protection in a super light package.Compression FitDesigned to keep weight down the compression fit, slip on design fits higher on the thigh than most pads. An internal silicone strip keeps the pads from slipping down.Breathable SockCompression square line Ripstop Spandex fabric allows for a durable lightweight feel along with great air flow.
The Project Lite knee pads are for racers and riders looking for extra-lightweight, hard shell protection. Our innovative compression fit knit sock and flexible hardshell give the Project Lite knee just the right amount of protection and secure fit.Unique Pro Knit ChassisA trail riding /minimal version of the Eurobike Award Winning Project Knee.Super thin – ideal for riders looking for trail ride protection or minimal weight/bulk for racing, our protection pad is just 6 mm thick. Combine this with our Pro Knit compression fit knee sock and you can start to understand why the Project series is the most advanced knee pad series on the market.Pedal Flex MobilitySpeed is the priority for racing, to gain that speed, efficient pedalling is key. The Project Lite knee uses a knitted, breathable sock to keep the rider cool and add to the comfort of a compression fit pad.Flexible Hard CapA hard yet flexible micro injected outer cap provides the best fit while dispersing forces in a crash. Designed to slide over rather than grip any surface a rider meets at flat out race speeds.
The Flex elbow/youth knee pads are for any rider needing complete coverage with confidence inspiring protection. Constructed in the same way our adult Flex Knee pads with an open back and dual layer protection the Flex has you covered.Key Features:Centre + Forearm StrapOur centre strap applies tension from both sides giving a comfortable and consistent fit on the upper arm / lower thigh and a second strap sitting above the forearm/calf muscle means everything stays where it should.Open Back DesignMaintaining airflow and reducing any sweat build up is a key feature for pads. The Flex pads have an open back section to allow sweat to evaporate away.Cap + Foam ProtectionTwo layers of protection covered by a tough outer fabric make for a flexible and hardwearing pad. Shaped to fit in a riding position. You will forget the pads are there.Technical Details:Tested beyond CE/ EN 1621/1,Centre strap compression keeps the Flex Elbow in place all day.,As with the Flex Knee, the elbow version shares the cap and foam combination to give maximum protection as well as being faced with abrasion resistant material.,An upper forearm strap holds the Flex Elbow pads in place and the 4-way stretch mesh and an open design give superb air flow..
The Kids Transitions feature a simple slip on fit and heat moulding foam.Our super light Kids Transition pads are designed for the little rippers out there that ride scoot bikes to pedal bikes. The Kids Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin.Key Features:SUPER LIGHTWithout compromising on safety and surpassing the relevant CE test the Transition pads offer comfortable protection in a super light package.COMPRESSION FITDesigned to keep weight down the compression fit, the slip-on design fits higher on the thigh than most pads. An internal silicone strip keeps the pads from slipping down.BREATHABLE SOCKRunning the length of the pad in the rear and extending across the lower front a breathable 4-way stretch mesh maintains airflow for all-day comfort.
The M1 Full Face Helmet is perfect for anything from racing to full days of uplifting or bike park laps. The M1 Helmet is the ideal helmet to keep you protected and comfortable. For 2020 the M1 Helmet has four colour choices so there's something for everyone in sizes from Youth Medium through to Adult XL.Lightweight ABS Shell17 Vents provide cool air intake and heat exhaustLarge eye port for greater field or vision and improved goggle fit4 colours7 sizesComplies to CE, CPSC and AS Standards
The M5 enters the 7iDP range with a focus on riders looking for a helmet that can do it all. Plenty of coverage for the back of the head and a custom peak comes on this entry-level helmet in 5 fresh colours and graphics.Deep rear head coverage14 vents for coolingCustom 7iDP visorOne hand dial adjust fitRapid adjust chin strap5 Colours and 2 sizesComplies to CE standards(S/M, L/XL)
The M5 enters the 7iDP range with a focus on riders looking for a helmet that can do it all. Plenty of coverage for the back of the head and a custom peak comes on this entry-level helmet in 5 fresh colours and graphics.Deep rear head coverage14 vents for coolingCustom 7iDP visorOne hand dial adjust fitRapid adjust chin strap5 Colours and 2 sizesComplies to CE standards(S/M, L/XL)