Kitted out with an ultra-protective ATC (Advanced Trail Casing), it uses K-Armor material to stop slashes and rips from bringing your ride to a halt. Made from a dual-layer compound, this tough and grippy tyre saves weight and assists with cornering control, keeping you upright and unrivalled over unpredictable terrains Dual Compound, Fast-Rolling MTB Tyre Fit for the most daring off-road adventures, this take on the Nevegal generates impressively low rolling resistance thanks to the siped, square knobs which make up the centreline. The outer edges put their taller, angled blocks to great use to improve braking traction in any conditions, making this Kenda tyre an essential pick for the modern MTBer. Technologies: ATC: Optimized for aggressive cross country or trail riding, the Advanced Trail Casing (ATC) is lighter and more supple than either of Kenda's gravity solutions. Using sheets of Kenda's SCT fabric across the tire sidewalls and a sub-tread belt of K-Armor under the tread blocks. The K-Armor fabric has a tighter weave, resulting in the use of less rubber during the construction process, yielding a lighter tire and a casing that is supple enough to allow the knobs to flex and form under load, yet still protects from pinch flats, punctures and cuts.
Built with a dual layer compound, the hard-wearing Helldiver puts its selection of technologically advanced casings to the test as you dive down every hill with aggression and confidence. Doing all it can to prevent punctures, the tyre also comes tubeless-ready for improved cornering grip and control on rough and tumble routes. Lightweight and Hard-Wearing MTB Tyre The centreline of this impressively lightweight tyre has a low-profile tread pattern, developed alongside Polygon-UR Team professionals, to keep you rolling with minimal resistance. Giving an outstanding showing on dry and dusty hardpack tracks, it also uses its tall and durable side knobs to give unrivalled braking traction as you weave your way to glory. Technologies: EN-DTC: Designed around the rigours of enduro racing. Featuring a lower rolling resistance value than previous dual tread compounds, tyres with EN-DTC show less wear than other similar tyres. With shore A values lower than the original DTC, the EN-DTC provides a more responsive ride, letting the knobs do the work of control and braking on the ground. AEC: Developed for the rigours of enduro, the new Advanced Enduro Casing (AEC) fills the gap between the burly Advanced Gravity Casing (AGC) and the weight-optimized Advanced Trail Casing (ATC). Using the same 3-piece Aramid inserts as the AGC casing, AEC omits the apex at the bead: for the same high level of puncture and cut resistance but without the added weight. A dual-layer compound provides the same reliable grip found on the AGC casing. RSR DUAL LAYER (RSRDL): Kenda developed this compound for a new generation of gravity tyres - an evolution of the existing Race Stick-E Rubber (RSR) compound. Building on the impressive original, the new RSR compound is a dual layer tread rubber, with the soft RSR compound on top and the stiff SRC on bottom. This new dual layer compound offers better performance because the stiff bottom SRC layer serves as the hard foundation for the softer RSR layer to push against. The result is a compound that provides better control and lasts longer than previous versions.
Keeping you in full control of the ride, this MTB tyre is Kenda's dry condition gravity tyre. It was exclusively developed with pro downhill mountain bike rider Aaron Gwin and used on World Cup tracks like Leogang and Lenzerheide. This ensures that is more than capable of holding its own against the toughest of competitions and off-road adventures. Kenda has made this versatile MTB tyre available in AGC or ATC casing options, so riders can choose a tyre that perfectly matches their riding style. The Pinner shines with excellent cornering predictability and particularly high puncture protection. This makes it an excellent choice for gravity racers and trail riders alike. - Excellent Predictability: A consistent contact patch when the bike is leaned over creates a super predictable feel - no sudden wash-outs - Optimised for Hard Pack: The tread pattern is done to work best on hardpack, rocky or rooty and loose over hard conditions. - AGC or ATC Casing Options: Choose the AGC casing for gravity riding, or ATC for a lighter trail tyre - Tubeless ready - Topo Design: Unique and stand-out topographic design pattern over the sidewalls and tread Technologies: AGC (AGC): THE MOST ADVANCED GRAVITY SOLUTION The Advanced Gravity Casing (AGC) is Kenda‘s latest innovation for gravity orientated riders. Utilizing strips of Kenda Vector Shield (KVS), a lightweight woven aramid material, positioned under the tread area and along the sidewalls to protect the tire from cuts and punctures. The KVS material offers nearly three times more cut resistance than standard protective materials. A 20 mm apex along the bead prevents pinch flats and burping. Our lightest and strongest gravity casing up to date. ATC (ATC): THE LIGHTER WAY Tire construction optimized for aggressive cross country or trail riding, the Advanced Trail Casing (ATC) is lighter and more supple than either of Kenda's gravity solutions. Using sheets of Kenda's SCT fabric across the tire sidewalls and a sub-tread belt of K-Armor under the tread blocks. The K-Armor fabric has a tighter weave, resulting in the use of less rubber during the construction process, yielding a lighter tire and a casing that is supple enough to allow the knobs to flex and form under load, yet still protects from pinch flats, punctures and cuts. DUAL LAYER COMPOUND: Kenda developed this compound for a new generation of gravity tyres - an evolution of the existing Race Stick-E Rubber (RSR) compound. Building on the impressive original, the new RSR compound is a dual layer tread rubber, with the soft RSR compound on top and the stiff SRC on bottom. This new dual layer compound offers better performance because the stiff bottom SRC layer serves as the hard foundation for the softer RSR layer to push against. The result is a compound that provides better control and lasts longer than previous versions. DUAL TREAD COMPOUND: Dual Tread Compound (DTC) is a combination of two different rubber compounds: L3R Pro (center knobs) and Stick-E rubber (corner knobs). DTC rubber is most commonly found on cross country, all-mountain, and cyclocross tires due to its rolling speed and grip.
Our tyres are engineered for performance and value across a wide range of interests and applications.
CE certified and ready to rule the roost, the Body vest 3DF AirFit is a must for riders who want to bulk up on their MTB protection. It brags a total of 11 points on the Leatt scoring system and offers a better range of all-round protection than the body vest counterpart. Fitting easily underneath your favourite jersey, the impossibly comfy armour has an elastic strap to secure its fitting when riding over rough terrain. Utilising the excellent 3DF AirFit impact foam construction unexpected falls from the bike need not pose a risk to your session and the multi-layered design is perforated to improve ventilation and flexibility. For those that ride aggressively, this breathable vest is certain to inspire confidence. Key Technology: Total Leatt® protection score of 11 points 3DF AirFit ventilated soft impact foam CE tested and certified as impact protection Chest prEN1621-3 Level 2 Back EN1621-2 Level 2
Whether it's your neck, chest, back, flank or shoulder, the Fusion Vest 3.0 has you covered. It is a wonderfully powerful beast full of durable strength and protection, fitting underneath baggy jerseys to offer unrivalled coverage as you shred. Highly reinforced, it sports a 3D design that is both simple and effective while also making it incredibly easy to adjust your fitting to suit the way you ride. Fitting easily around the body, it utilises a hard body shell and absorbs high-impact energy to reduce blows delivered by unforgiving terrain. Designed to quickly stop and de-accelerate head-on impacts, Leatt’s advanced neck brace chassis technology is all you need and more to reduce the risk of injury. Not only does it absorb impacts and injuries but it transfers energy from the helmet to a reinforced part of the body, keeping you safe as you look to go again. The soft impact foam is both durable and cosy and the high-end performance capability of the vest is certain to inspire confidence morning, noon and night.
Smell that? That’s the sweet taste of a trail ready and waiting to be gripped! So grab your Leatt 3DF Back Protector and guarantee the ultimate form of safety as you ride morning, noon and night. The incredibly comfortable vest conforms and moulds to the shape of your body and is ever so breathable for rides that turn even the quietest of riders into a fully-fledged shredder. Fitting under your favourite jersey, the 3DF Back Protector inspires confidence as you kick up roost and nail berms, offering flexibility and extended coverage as you adjust to unforgiving terrain. It is CE certified to meet stringent European standards and absorbs energy when subjected to impact forces. Think the proof is in the pudding? Then you’ll be pleased to hear that the body armour scores a big six on the Leatt protection rating. To keep comfort at a premium you can bet your bottom dollar Leatt have gone all out. There is intense ventilation and breathability thanks to the AirMesh wicking fabrics and an anti-odour MoistureCool system prevents odours and sweat from forming. If that wasn’t enough, there is a soft-shell protector that is compatible with neck braces and soft impact foam that softens blows. Trail life can throw curveballs at you when you least expect, but you can at least be fully prepared to tackle it with the 3DF Back Protector.
Scoring an impressive 20 points in Leatt’s protection rating system, there is no doubt the Knee Guard 3DF 6.0 is a must for riders who love kicking up roost aggressively. The soft internal padding revolutionises comfort and works in tandem with the additional co-moulded hard shell sliders to maximise impact absorption when suffering a fall. Hardening immediately upon impact, the 3DF impact foam dampens knocks and grazes in order to reduce the potential of injuries. The pre-curved design allows for a fit worthy of any offroad champion and a silicone print keeps the guards in place no matter how aggressive the ride becomes. Covering all bases, the 6.0 pads have side impact protection and the lightweight design ensures that Leatt’s creation sits underneath trail baggies. CE certified, it is time to set the tone on the beaten path with body armour certain to keep you smiling throughout your session.
A genuine Leatt spare or replacement part for your hydration system.
Sold separately and compatible to all Leatt hydration systems. Comes with a 45 degree connector for improved angle
With a low gravity, improved design, the Leatt Bladder Flat CleanTech 2L (70oz) w tube and bite valve provides a quicker and more efficient design that makes keeping hydrated easier than ever before. The bladder is burst tested and comes with a 45-degree bite valve and a 1m tube, which work together to give you an improved flow. The added hose connector also comes with a push-lock function and auto shut-off valve to ensure that there isn’t any leakage.
Designed specifically for the DBX 6.5 Neck Brace, this emergency bolt is used in a special release mechanism and allows for a quick release should you suffer unexpected fall from the bike.