This custom rear mountain bike (MTB) wheel comes kitted out with a tubeless ready WTB KOM Tough i35 TCS rim, a Hope Pro 4 MTB hub and stainless steel, plain gauge spokes. As a result, you'll benefit from its smooth and dependable rolling performance as you carve your way around the mountain. This wheel is ideal for enduro, all-mountain and gravity/downhill riding. WTB KOM Tough i35 TCS Rim This rim of this wheel features a super-durable alloy construction to ensure it can take everything the mountain throws at it, and it's also lightweight to ensure exceptional climbing efficiency. The durability is further enhanced by the I-Beam construction, while the dual support beams increase the stiffness for consistent, reliable handling. Plus, the 4D angled-spoke drilling disperses tension evenly to allow for a fast-rolling performance. Rim Features: Rim Material: Aluminium Rim Type: Clincher Tyre Compatibility: Standard clincher and tubeless clincher Tubeless Compatible: Yes Usage: Trail, Enduro, Gravity Width: 35mm (inner) Brake Compatibility: Disc brake only ERD: 27.5": 568mm; 29": 604mm 4D angled spoke drilling eliminates binding and lateral loading, dispersing tension more evenly over a greater area Recessed channel along rim centre has enabled installation of WTB's Solid Strip Solid Strip prevents tubeless tape sagging at the spoke holes for a smooth, consistent tyre/rim interface Weight: 602g (27.5"), 630g (29") Rim Technologies: UST Tubeless Ready: The UST concept improves traction, control and comfort while reducing inertia and flats. TCS 2.0 Technology: This refined version of the “Tubeless Compatible System” offers the same high-performance, lightweight mountain bike rim structure, but is now easier to install and more dependable. Hope Pro 4 MTB Boost Rear Hub From their very first Ti-glide hubs launched back in 1993, Hope has had a reputation for producing some of the most durable and high-quality hubs on the market. The mainstay of this reputation has been their attention to detail in both the bearings they use and their inspection processes. All bearings are from world-renowned manufacturers to ensure the highest quality. Also, every hub shell, freehub and axle are produced in their Barnoldswick factory and checked and inspected to the highest degree. The Hope Pro 4 hub builds upon the brand's Pro 2 EVO hub and offers superb attention to detail and excellent rolling performance thanks to the high-quality Schaeffler bearings throughout. Hub Features: Material: Machined from forged 2014 T6 aluminium billet for unsurpassed reliability Bearing Type: Sealed Stainless Steel cartridge bearings 4 Pawl Ratchet with 44 tooth engagement (8.2 deg) Available in 148 x 12mm thru-axle Conversions are available for 141 x QR (sold separately) Freehubs available to suit 10/11spd Shimano, 12 Speed MicroSpline or Hope cassette (sold separately) Specifically designed for 148 x 12mm frames with hub flanges moved outboard 3mm compared to standard Pro 4 rear hubs that increase the complete wheel stiffness Freehub: SRAM XD driver Weight: 311g Please Note: there are multiple front and rear hub options and rim sizes available for these wheels via the selection menu at the top of this page.
Commencal has been working on 29/27 ‘Mullet’ bikes and frames for many years now with their different downhill (DH) teams. This work has allowed Commencal to understand that to transform a regular bike with the same sized wheels into a bike with different sized wheels, it isn’t effective to just throw a 27-inch wheel on the back. The geometry and kinematics of the bike must be completely reworked and it is thanks to this experience that we are now able to present the most successful version of the META V4 they've ever produced, the META AM. Equipping this META AM with different sized 29/27-inch wheels is not the result of a trend that Commencal is following. Quite simply, this way the bike is much more balanced, specifically relating to grip on the front and back - the large 29-inch wheel on the front allows more confidence and rolling capacity whilst the 27.5-inch rear wheel offers more manoeuvrability and responsiveness. The result is a bike that is more agile and easier on the steeps, more efficient under braking and more dynamic when pushing hard. Once again, Commencal's choice to work with Aluminium has allowed them to accompany this change in wheel size with an adjustment of the geometry. A shorter 10mm reach, a straightened steerer angle and extended (10mm) chainstays mean that the rider is naturally repositioned in the centre of the bike and will therefore have the ability to be more precise and agile in their technique. Undoubtedly, one of the points that have changed the most is the way the suspension works. Apart from the kinematics which has been reworked to provide more liveliness, Commencal made a point of managing the stiffness of the rear triangle. Through new double row Enduro Bearings, eliminating any deformation, the new META AM frame offers perfect deformation/rigidity management to provide grip, comfort and performance. In addition to all this in-depth work, as on their META POWER TR and META TR models, Commencal now offers a "Flip Chip" on the shock extension in order to be able to better adjust the geometry, and therefore fit with your style. This system also means you can adapt the height of the bottom bracket as well as the steerer and saddle angles within seconds. Depending on your preferences, you can have the choice between a dynamic bike that’s perfect for big pedalling trips, or a more progressive version that is ideal for days in the bike park or on more committed trails. Finally, they have worked on a detail that makes the difference; the finished look. The welds have been the subject of meticulous work to reduce them as much as possible without affecting the solidity of the frame. The cable routing is neat for easier maintenance, the cables being easily accessible in the down tube, while grommets are placed at the ends to give perfect support and prevent penetration of water and mud. Installing a bottle cage has also been made easy. Features: Bicycle Type: Enduro Frame Material: Al-6066 Frame Weight: 3,9 Kg / 8.59 Lb Rear Wheel Travel: 160 mm Shock Length / Stroke: 230 x 62,5 mm Piggy Back Shock Compatible: Yes Shock Bushings: 20 x 10 Mm Recommended / Max Fork Height: 581 mm / 591 mm Headset Dimension Tapered: 1-1/8" / 1-1/2" Headset Type: Zs44/zs56 Maximum Tyre Dimension (ETRTO): 68 mm Disc Brake Standard Postmount: 200 mm Rear Rotor Max Size: 220 mm Seatpost / Seat Clamp Diameter: 34.9 mm / 38.5 mm Bottom Bracket Type Press Fit: BB92 ISCG Mount: ISCG05 Front Derailleur Type: No Rear Hub Compatibility: 12 x 148 Mm Accessories: Down Tube Protector, Chainstay Protector, Seatstay Protector, Rear Wheel Axle. Pre Cute Anti Noise Foam Tubes for Derailleur Hose / Brake Hose / Dropper Hose.
This stand is built to maximise portability and functionality, delivering a well-appointed bike repair stand for all experience levels. Some of the features include a reliable spinner-knob clamp that is easily adjustable and securely holds the bike in position and a clutch arm that allows for 360-degree rotation without clamp adjustment. The solid tripod configuration holds up to 65lbs on flat or uneven surfaces. The Feedback Sports Sport Mechanic repair stand is height adjustable from 42" to 65" and folds into a 12.6lb compact unit for easy use at home, or on the go. Features: Clamp features Spinner Knob for precision closure and uniform clamping pressure 360-degree rotating clamp design provides easy access to any part of your bicycle Frame clamp work height from 1,070mm-1,660mm (42"-65") Rubber clamp jaws protect expensive components and confidently secure any bike Clamp opening up to 4.8mm (1.9") accommodates even the largest diameter tubes Anodised 6061 T6 aluminium and powder-coated steel construction is lightweight, corrosion-resistant and incredibly durable Stiff tripod base and rubber-coated end caps create ultimate stability even on uneven surfaces Total load capacity of 29.5kg (65lbs) accommodates service on most road, cyclocross, mountain bikes, and electric bikes Portable and compact construction creates a remarkably small folded footprint of 130mm x 200mm 1,150mm (5" x 8" x 45") Quick-release fittings make setup and storage fast and easy At 5.7kg (12.6lbs), hitting the road with this stand is never in question 3-Year Warranty
Designed with a 2:3 buoyancy profile, the HUUB Delta Wetsuit provides fantastic flexibility while enhancing your body positioning in the water for a comfortable and streamlined performance that works to reduce drag. Crafted with specific panel placements and 1.5mm neoprene under the arms so you can move easily without restriction for an efficient stroke. Flatlock seams reduce any irritation as you move so you remain focused and free from distraction while nylon faced neoprene provides comfort at the cuffs and the neck. Finally, a highly visible design on the back of the suit makes you stand out in open water conditions.
A Suit That Delivers New leg paneling delivers faster transition splits. Add to that a low neckline and VO2 chest panel, and you’ve got a suit that delivers everything you need in training and racing - minus the arms, of course. Technologies And What Makes This The Best Reaction Yet REACTIVE STRETCH TECHNOLOGY (RST) - Further enhanced with ultra stretch jersey, the RST panels improve arm mobility, reach and propulsion. S-FLEX - 2mm thin side panels improve fit and body rotation in the water without sacrificing buoyancy. VO2 CHEST PANEL - A central split chest panel allows greater chest expansion and unimpeded breathing. LOWERED COLLAR - Over twenty years of wetsuit design experience has made our traditional zipper an industry standard. Our curved closure flap reduces rear collar height, improving comfort and reducing chafing. Also features an easy-access key loop. QUICK EXIT LEGS - 2mm lower leg panels maximize the flexibility and promote a quick release from your suit in transition. Taping on the internal seams is reinforced and allows you to cut the leg to the desired length. BUOYANCY - The Reaction features a 4-5-4 panel design centralizing core buoyancy to raise the position of the hips in relation to the rest of the body. Two 4mm chest panels accent natural lung buoyancy to optimize upper body position relative to the legs. 5mm neoprene supports the hips and lower torso, lifting the body in the water, reducing drag and improving speed. 5mm panels in the back of the hips are orientated to facilitate a raised body position when you roll to the side during breathing. FLEXIBILITY - Highly flexible 100% nylon ultra stretch jersey is lighter and features 35% improvement in elongation compared to standard jersey. "
The Norrona falketind Gore-Tex Paclite Pants boast an incredibly lightweight design, alongside a premium waterproof and breathable Gore-Tex® membrane. Made for all-year mountaineering, as well as general outdoor activities and anything from trekking to ski touring, the world-leading membrane offers durable waterproofness of 28,000mm, alongside optimised breathability and total windproofness. Other key features include a custom-fit waist system™, a zippered thigh pocket with a mesh pocket, ¾ side zippers for flexible ventilation and effective dressing, a bootlace hook, hook-and-loop adjustment on the ankles, and eyelets if you want to fasten a cord around the boot to make sure it stays in place. The pants also have a technical fit with articulated knees to improve mobility.
The reception for blueseventy's original thermal suit far exceeded their expectations. blueseventy immediately heard from a growing market of eager open water swimmers who praised them for extending their outdoor swimming season. The THERMAL Reaction is their response to deliver this option to more swimmers. Built with a high-grade traditional YKK zipper for easy in and out, proven RST panels, SCS coating, triple glued seams, blind stitched and internally taped high stress areas - the only thing left to do is hook your key on the loop and jump in. MADE FOR COLD WATER Full internal zirconium jersey reduces water absorption and protects against heat loss. Paired with neoprene accessories the THERMAL Reaction is rated down to 48°F / 9°C while a standard full suit for swimming is typically good to 54°F / 12°C. VO2 CHEST PANEL A central split chest panel allows greater chest expansion and unimpeded breathing. REACTIVE STRETCH TECHNOLOGY (RST) Upgraded to silver premium Yamamoto #39 cell rubber, the RST panels improve arm mobility, reach and propulsion. S-FLEX 2mm thin side panels improve fit and body rotation in the water without sacrificing buoyancy. BUOYANCY + The THERMAL Reaction features a 4-5-4 panel design centralising core buoyancy to raise the position of the hips in relation to the rest of the body. Two 4mm chest panels accent natural lung buoyancy to optimise upper body position relative to the legs. 5mm neoprene supports the hips and lower torso, lifting the body in the water, reducing drag and improving speed. 4mm panels in the lower legs ensure a more efficient kick by keeping the legs on the surface of the water.
A Suit That Delivers The upper body has been upgraded with a brand-new jersey liner for unrestrictive reach in the water and, new leg panelling delivers faster transition splits. Add to that a low neckline and VO2 chest panel (panels split with flexible neoprene), and you’ve got a suit that delivers everything you need for training and racing. Technologies and What Makes This the Best Reaction Yet REACTIVE STRETCH TECHNOLOGY (RST) - Further enhanced with ultra-stretch jersey, the RST panels improve arm mobility, reach and propulsion. S-FLEX - 2mm thin side panels improve fit and body rotation in the water, without sacrificing buoyancy. VO2 CHEST PANEL - A central split chest panel allows greater chest expansion and unimpeded breathing. LOWERED COLLAR - Curved closure flap reduces rear collar height, improving comfort and reducing chafing. Also features an easy-access key loop. QUICK EXIT LEGS - 2mm lower leg panels maximize the flexibility and promotes a quick release from your suit in transition. Taping on the internal seams is reinforced and allows you to cut the leg to a desired length. S-GRIP PANELS - A textured forearm print on our high stretch jersey provides extra feel for the water and additional grip in the propulsion phase of the stroke. AQUASEAL - The 4-way stretch fabric in the silicone cuffs seal the wrists from unwelcome water entry, without catching when removing the suit. BUOYANCY - The Reaction features a 4-5-4 panel design (referring to neoprene thickness), centralising core buoyancy to raise the position of the hips in relation to the rest of the body. Two 4mm chest panels accent natural lung buoyancy to optimize upper body position relative to the legs. 5mm neoprene supports the hips and lower torso, lifting the body in the water, reducing drag and improving speed. 5mm panels in the back of the hips are orientated to facilitate a raised body position when you roll to the side during breathing. FLEXIBILITY - Highly flexible 100% nylon ultra-stretch jersey is lighter and features 35% improvement in elongation compared to standard jersey. Care and storage Rinse your wetsuit in clean fresh water after each use. Dry inside out, then outside in. Keep away from direct sunlight. Avoid or limit use in chlorinated water.
The Norrona flexible Women's falketind flex1 Shorts are a versatile softshell design for all kinds of outdoor activities. Lightweight, stretchy, comfortable and durable, they are made of wind-resistant, breathable, water-repelling and recycled softshell fabric. The above knee cut and the athletic fit is also customised for mountain-related activities but will serve perfectly for a variety of adventures. Practical features include a sleek custom fit waist system, two slanted hand pockets with zippers, a thigh pocket, a back pocket with zipper, gusset crotch for increased comfort and a sleek hem to avoid chafing and discomfort. About flex1 Fabric A single ply stretchy fabric that provides wind resistance and water-resistance while allowing improved moisture vapour transportation rates compared to other waterproof products. These specially designed fabrics have all the attributes we expect in a softshell -stretch, water-repellency, wind resistance and excellent moisture vapour transportation.
Designed with a 2:3 buoyancy profile, the HUUB Women's Delta Wetsuit provides fantastic flexibility while enhancing your body positioning in the water for a comfortable and streamlined performance that works to reduce drag. Crafted with specific panel placements and 1.5mm neoprene under the arms so you can move easily without restriction for an efficient stroke. Flatlock seams reduce any irritation as you move so you remain focused and free from distraction while nylon faced neoprene provides comfort at the cuffs and the neck. Finally, a highly visible design on the back of the suit makes you stand out in open water conditions.
The reception for blueseventy's original thermal suit far exceeded their expectations. blueseventy immediately heard from a growing market of eager open water swimmers who praised them for extending their outdoor swimming season. The THERMAL Reaction is their response to deliver this option to more swimmers. Built with a high-grade traditional YKK zipper for easy in and out, proven RST panels, SCS coating, triple glued seams, blind stitched and internally taped high stress areas - the only thing left to do is hook your key on the loop and jump in. MADE FOR COLD WATER Full internal zirconium jersey reduces water absorption and protects against heat loss. Paired with neoprene accessories the THERMAL Reaction is rated down to 48°F / 9°C while a standard full suit for swimming is typically good to 54°F / 12°C. VO2 CHEST PANEL A central split chest panel allows greater chest expansion and unimpeded breathing. REACTIVE STRETCH TECHNOLOGY (RST) Upgraded to silver premium Yamamoto #39 cell rubber, the RST panels improve arm mobility, reach and propulsion. S-FLEX 2mm thin side panels improve fit and body rotation in the water without sacrificing buoyancy. BUOYANCY + The THERMAL Reaction features a 4-5-4 panel design centralising core buoyancy to raise the position of the hips in relation to the rest of the body. Two 4mm chest panels accent natural lung buoyancy to optimise upper body position relative to the legs. 5mm neoprene supports the hips and lower torso, lifting the body in the water, reducing drag and improving speed. 4mm panels in the lower legs ensure a more efficient kick by keeping the legs on the surface of the water. Femme Fit Unisex isn't good enough. Fit and feel are everything. Just ask the amazing female athletes that helped blueseventy develop their women's specific range. blueseventy obsess over the fine details of all of their women's suits: smaller wrists and ankles, longer zippers to make them easier to get in and out of, and a lowered neckline to provide superior comfort and reduced chafing
A Suit That Delivers The upper body has been upgraded with a brand-new jersey liner for unrestrictive reach in the water and, new leg panelling delivers faster transition splits. Add to that a low neckline and VO2 chest panel (panels split with flexible neoprene), and you’ve got a suit that delivers everything you need for training and racing. Technologies and What Makes This the Best Reaction Yet REACTIVE STRETCH TECHNOLOGY (RST) - Further enhanced with ultra-stretch jersey, the RST panels improve arm mobility, reach and propulsion. S-FLEX - 2mm thin side panels improve fit and body rotation in the water, without sacrificing buoyancy. VO2 CHEST PANEL - A central split chest panel allows greater chest expansion and unimpeded breathing. LOWERED COLLAR - Curved closure flap reduces rear collar height, improving comfort and reducing chafing. Also features an easy-access key loop. QUICK EXIT LEGS - 2mm lower leg panels maximize the flexibility and promotes a quick release from your suit in transition. Taping on the internal seams is reinforced and allows you to cut the leg to a desired length. S-GRIP PANELS - A textured forearm print on our high stretch jersey provides extra feel for the water and additional grip in the propulsion phase of the stroke. AQUASEAL - The 4-way stretch fabric in the silicone cuffs seal the wrists from unwelcome water entry, without catching when removing the suit. BUOYANCY - The Reaction features a 4-5-4 panel design (referring to neoprene thickness), centralising core buoyancy to raise the position of the hips in relation to the rest of the body. Two 4mm chest panels accent natural lung buoyancy to optimize upper body position relative to the legs. 5mm neoprene supports the hips and lower torso, lifting the body in the water, reducing drag and improving speed. 5mm panels in the back of the hips are orientated to facilitate a raised body position when you roll to the side during breathing. FLEXIBILITY - Highly flexible 100% nylon ultra-stretch jersey is lighter and features 35% improvement in elongation compared to standard jersey. Care and storage Rinse your wetsuit in clean fresh water after each use. Dry inside out, then outside in. Keep away from direct sunlight. Avoid or limit use in chlorinated water.