Fox Suspension 36 Float Factory FIT4 Boost Fork (2023)Just when you thought the 36 Float Factory FIT4 mountain bike (MTB) fork couldn't be improved any further, Fox Suspension has updated it to be stiffer, stronger and lighter than before. This smooth performing enduro-ready model also boasts the renowned Kashima coating and offers a wide range of adjustments.This race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has also equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer: 1.1/8" to 1.5" Tapered Offset: 44mm Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatibleTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The SCOTT Contessa Active 40 is a hard tail mountain bike that features a light Alloy Frame. The series comes fully equipped with a Suntour fork, perfect for those always on the go.
The SCOTT Contessa Active 50 is a hard tail mountain bike that features a light Alloy Frame. The series comes fully equipped with a Suntour fork, perfect for those always on the go.
A summer blockbuster with an eye for adventure, the Rockhopper Comp lives for high action and fast-paced plot twists and features an all-new, Premium A1 Aluminum frame making its singletrack debut.Roll the credits to discover an SR SunTour XCM fork with a custom two-way damping circuit, Stout wheelset, SRAM Level hydraulic stoppers and MicroSHIFT’s wide-range 1x9 drivetrain and you have backup provided by a supporting cast that’s all thriller and no filler, but will never leave you hanging.A heart of gold, presented in our lightweight yet durable Premium A1 Aluminum, the Rockhopper’s butted aluminum frame features hydroformed top and downtubes in order to keep weight low and strength high, all while providing increased standover clearance, slick internal cable routing and dropper-post compatibility. With the goal of making sure that the Rockhopper offers both the best fit and best performance for every person, no matter their measure, we’ve paired each Rockhopper frame size with the optimal wheel size. The result is a Rockhopper to fit every rider and the assurance that every Rockhopper is rolling on the best-handling wheel for its frame size.,Bringing our Rx Tune to Rockhopper for the very first time, the lockout-equipped SR Suntour XCM with custom Multi-Circuit damping brings size-specific travel and spring rates to the show in a performance that’s sure to impress while also ensuring consistent geometry, handling and suspension performance, regardless of frame or wheel size.,Beautifully beastly, SRAM Level hydraulic disc brakes pack a mean bite but deliver their power with a refined, intuitive feel to make for a package that punches way above its pay grade.,Keep things simple with a durable 1x MicroSHIFT drivetrain that offers plenty of range along with a clutch-equipped rear derailleur that keeps your ride quite—and your chain on.,Pair dead-reliable hubs from Formula with our 25-millimeter internal diameter, hookless Stout rims for a wheelset hat-trick: strong, light and durable..Please note: The design of the top tube on the XS size is shaped to accommodate the saddle when at its lowest point in the frame
The Topeak Pakgo X is the ultimate bike travel case. It comes with a mounting system that converts to a mini-workstand, all the protective sleeves you need and two wheel bags.Mounting system converts to mini-workstand and allows easy re-assembly and fine tuningDrivetrain cover protects crankset, chain and rear derailleur from scratches and grease stains. Protective sleeves and frame pads prevent abrasion on frame from other components and helps keep them secureIncludes 2 wheel bags (Tyre size up to 26 x 2.35 or 700 x 40C)Includes a built-in TSA lockReserved name tag for personalizationFour large ø60 mm multi-directional wheelsCarry handles for easy transportFour bumpers on each side protects case from ground contact when openedInner mesh pockets keep tools and gear organizedPadded foam case offers impact protectionAn easy to pack / unpack bike transport system featuring a lightweight and flexible Makrolon polycarbonate shell with high-impact strength and reinforced with an aluminum mounting system. The upright case design with four large ø60mm multi-directional wheels delivers luggage-like ease while rolling and includes carry handles and a built-in TSA lock for safe and secure transport. Two wheel bags, protective sleeves, and drivetrain cover provide protection against scratches and grease stains while inner pockets help keep your gear organized all the way to your final destination. When you arrive, the mounting system unfolds to form a mini workstand to hold your frameset steady during re-assembly and fine tuning.Specification:Capacity: Fits most bikes with wheelbases up to 112 cm / 44 , Not compatible with 27.5 & 29 bikesMaterial: 100% Makrolon polycarbonate shell / Reinforced aluminum internal frameCompatibility: Front: Compatible with QR skewer or 12 mm x 100 mm thru axle (Road bike disc)Rear: Compatible with 130 / 135 mm QR skewer or 12mm thru axlesAdded Features: Upright case design, TSA lock, Carry handles, Four large ø60mm multi-directional wheels, Inner pocketsIncludes frameset mounting system, 2-wheel bags, Drivetrain cover, Protective sleeves, and Protective frame pads for frame tubes and fork bladesSize: 127 (H) x 85 (L) x 35 (W) cm / 50 (H) x 33.5 (L) x 13.8 (W)Weight: (APPROX)10 kg / 22 lb (Case only) / 12.8 kg / 28.2 lb (With component protective covers)Max Mini-Stand Capacity: 17 kg / 37.5 lb.
The Zipp 202 Firecrest Tubeless Disc Brake Wheels harnesses high technology for high adventure. This wheel is tubeless ready for road riding that doesn t always stay on smooth pavement.New logo and graphics that scream speedFirecrest rim Technology provides world class handling and stabilityTo ensure compatibility with any bike, our versatile ZR1 hubs come with swappable end caps to work with QR s and thru-axlesTubeless ensuring secure performance even when ridden at lower tyre pressures.The Zipp 202 Firecrest Tubeless retains its 32mm rim depth for a classic feel with real aero benefits. The wheel s 21mm internal width is aerodynamically optimised for use with 28mm wide tyres. Its tubeless design lets you run lower tyre pressures for improved grip and rolling resistance without the risk of pinch flats. At the centre of the 202 Firecrest Tubeless Disc-brake is a durable and versatile new hub set. The ZR1 DB hub offers greater bearing durability and quicker engagement with a Centre locking brake interface.Orientation (wheels): RearSize (wheels): 700cRim construction: CarbonTire compatibility: Clincher Tubeless ReadyRim depth: 32mmSurface texture: ABLC SawToothBrake compatibility: Disc (Center Lock)Rim - inside width: 21mmRim profile: SymmetricalRim finish: UD fiber, adhesive decalsColor (Decal): StandardNipple material: AluminumNipple anti-rotation: Sapim Secure-LocSpoke type: CX-Ray - BlackSpoke count: 24Spoke pattern: 2 CrossHub: ZR1 Disc BrakeDriver body type: SRAM/Shimano Road or SRAM XDRColour (hub): BlackAxle type (Wheels): TA 12x142Axle material: Aluminum front & rearBearings: Cartridge - Stainless SteelDriver Mechanism: 6 Pawls Leaf SpringDriver body material: AluminumMax tyre pressure: 100psiMax recommended rider weight: 250lbs
With quick acceleration and a lightweight efficient feel on the climbs this newcomer in the Cosmic family takes over the venerable Ksyrium Pro Carbon UST. Carbon rims and disc-brake control gives you an added advantage in the mountains and hills. It features the same rim as our pro-level SLR 32 model which means superlight full carbon construction for easier climbing and instant acceleration.The 21mm internal rim width is optimized for 28mm tires to deliver a smooth efficient ride on a variety of road surfaces. And new refined spokes help make this rim 80g lighter than its predecessor. Our new Infinity hub platform adds stiffness so the wheels feel quick and responsive out of every corner.Our Road Tubeless system lets you run lower tire pressure for improved rolling efficiency a smoother ride quality and a reduced risk of flats. The new rim bed shape makes it easier than ever to mount and remove tires. If your typical rides include tough climbs technical cornering and descents the Cosmic SL 32 Disc is a fast easy way to supercharge your road bike.These wheels are designed engineered and patented by Mavic in Annecy France and are 100% handmade in our European carbon factory. Key benefits Fast climbing and snappy acceleration Reduced inertia of a lighter weight rim delivers instant acceleration NACA inspired rim shape (32mm deep) minimizes aerodynamic drag Flat double-butted spokes save weight and improve responsiveness Laterally stiff for improved power transfer Our new Infinity hub plaform optimizes lacing and spoke tension to improve wheel stability Strong hub axle and ID360 freewheel technology for instant acceleration Improved UST Road delivers more speed comfort and control in an easy to use tubeless system No tubes means less friction better efficiency and grip a reduced risk of punctures New rim bed shape makes it easier to mount and change tires Rims Tire: UST Tubeless and tubetype Disc brake specific profile Internal width: 21 mm UST tubeless technology Drilling: traditional Height: 32mm ETRTO size: 622x21TC Material: 100% carbon fiber Spokes Count: 24 front and rear Nipples: brass ABS Material: steel Shape: straight pull flat double butted Lacing: front and rear crossed 2 contactless Delivered with User guide UST valve and accessories Front QR adapters Pre-installed tubeless rim tape Rear QR adapters for Instant Drive 360 Hubs Axle material: aluminum Front and rear bodies: aluminum Instant Drive 360 freewheel technology Rear: Quick Release 12x142 and 12x135 compatible QRM Auto bearing preload technology Front: Quick release and 12x100 through axle compatible Infinity hubs Intended use Recommended tire sizes: 25 to 32 mm ASTM CATEGORY 2 : road and offroad with jumps less than 15cm For a longer longevity of the wheel Mavic recommends that the total weight supported by the wheels doesn't exceed 120kg bike included Max Pressure: see indication on wheel and tire If they differ use the lowest of the 2 Minimum and maximum allowed tyre width: see indication on wheel Maximum tyre pressure: 61bar/88PSI with a 25mm tyre - 35bar/51PSI with a 64mm tyre Compatibility Freewheel: Shimano/Sram convertible to Campagnolo ED11 N3W and XD-R with optional driver bodies Rear axle: 12mm thru axle convertible to Quick Release with included adapters Front axle: 12x100 thru axle easily convertible to quick release with included adapters Not compatible with 15mm through axles Versions Disc standard: Center Lock® only Freewheel: Shimano/Sram or XD-Road Compatible Adapters and freewheel bodies 12 to 9mm front adapter for quick release (V2680301) 12mm front hub cap (V2680501 - Delivered with the wheel) 12x142 rear axle adapters (V2510701 - Delivered with the wheel) 12 to 9mm rear adapter for quick release (V2510801 - Delivered with the wheel) ID360 Shimano / Sram Light freewheel body (V3850101) ID360 Campagnolo freewheel body (V3440101) ID360 XD-R freewheel body (V2580101) ID360 Shimano / Sram freewheel body (V3430101) ID360 N3W freewheel body (V4270101) Information on specified weight The weight of the wheels is announced at +/-5% in XD/XD-R and Center Lock version without quick release nor valve nor rim tape
If you are looking to enter into the world of indoor training or to upgrade your ‘dumb-trainer’ to a smart direct-drive trainer, then Elite’s Direto-XR T is an excellent option. Sitting just below Elite’s top-of-the-range model, this is a mid- to upper-tier trainer that offers a respectably smooth ride feel and accurate power data, at a competitive price point. All in all, it’s a trainer that’s hard to beat. Accurate Power, Smooth Ride Feel Unlike most trainers on the market, Elite have integrated a power meter to measure power data. This, combined with the company’s proprietary OTS (Optical Torque Sensor) technology, has enabled the company to reach an independently certified accuracy of 1.5%. To counter the problem of a heavy unrealistic ride feel, common in early and cheaper indoor trainers, Elite uses an oversized gearing wheel to increase the RPM of the flywheel. In do so, this trainer offers a smooth and more realistic feel. Making it that much tolerable to wile away the hours indoors. For the third generation, the makers have upgraded the drive unit to give the XR the ability to simulate a leg-destroying 24% gradient and produce over 3600 watts of resistance at 60kph. Being more than enough for the likes of Nairo Quintana or Chris Hoy, we’re confident it’ll handle whatever you throw at it! Set the trainer to erg mode, while training or racing indoors, and it’ll automatically adjust the power and gradients, depending on your current need; leaving you free to let your mind wander. Stable, Compact and Easy to Store The wide feet used on the Direto make it stable when putting down the power, but they also fold away making the unit easy to store. The feet can also be adjusted to ensure you aren’t rocking about on unstable surfaces. Compatibility, Connectivity, And Set-Up To get going, simply take the indoor trainer out of the box, flip out the legs, attach the cassette of your choice, and it’s good to go. The Direto XR-T comes pre-installed with a Shimano HG11 freehub body, adaptors for 130mm and 135mm QR axles, and 142x12mm thru-axles. This should cover set-up for the majority of people. For this latest version, the company have also adapted the body of the trainer in order to accommodate bigger rear derailleurs used for 1x drivetrains. As you’d expect from a modern smart trainer, the latest generation of ANT+™ FE-C and Bluetooth connectivity are incorporated, meaning it’s compatible with pretty much any cycling app or software, computer, smartphone, or tablet you’d care to name, and it supports iOS, Android, OSX and Windows. Once connected, log yourself into your chosen platform, choose a workout or race, and the trainer will adjust resistance as required. If you are looking to inject more method to your training — or perhaps more madness in the form of indoor racing — with the interactivity provided all you need do is pedal and the trainer will take care of the rest. Additionally, the Direto can be managed via the company’s My E-Training software and app (a 12-month free subscription is included). Product Features Upgraded drive unit that can replicate gradients up to 24% and produce over 3600 watts of resistance at 60kph 1.5% power accuracy, independently certified OTS (Optical Torque Sensor) technology and integrated power meter to ensure accurate and reliable power readings Smoother and more realistic ride feel thanks to the oversized gearing wheel, which increases the RPM of the flywheel Compact and easy to carry when folded Wide legs and adjustable feet make it stable once set-up Compatible with bigger rear derailleurs used with 1x drivetrains Compatible with 130 and 135mm quick-release frames as well as 142 x 12mm thru-axles, adaptors for Boost 148 x 12mm frames are available separately Includes a free 12 month subscription to Elite's My E-training App for Windows, iOS and Android and a 1-month free Zwift subscription Custom front-wheel riser block included Compatible with 9, 10 and 11-speed Shimano and SRAM cassettes (not included), can be adapted for Campagnolo using adaptor TT14233, SRAM XDR with TT14279 or Shimano MICRO SPLINE using TT14315
PUSH THE PACE ON CLIMBS LET LOOSE ON THE DESCENTS. THIS ALUMINIUM HARDTAIL GIVES YOU A FEEL FOR THE TRAIL WITH BALANCED CONFIDENT HANDLING AND A PLUSH SUSPENSION FORK. KEY PERFORMANCE FACTORS Proven alloy performance ALUXX aluminium frameset is hand-built in-house by the world leader in aluminium engineering. Balance and stability Frame geometry is designed to optimize the balance and roll-over capabilities of 29-inch wheels or the liveliness of 27.5-inch wheels (depending on frame size). XC control Suspension fork offers either 80mm or 100mm of smooth travel for added XC control. Sizes 27.5: XSSML 29: SMLXLXXL Frame ALUXX-Grade Aluminum disc Fork SR Suntour XCM30 QR steel steerer XS: 80mm travel (27.5) S: 80mm travel (27.5) / 100mm travel (29) M: 100mm travel (27.5) / 100mm travel (29) L: 100mm travel (27.5) / 100mm travel (29) XL: 100mm travel (29) XXL: 100mm travel (29) Handlebar Giant Connect Trail 31.8mm XS: 730mm (27.5) S: 780mm (27.5) / 780mm (29) M: 780mm (27.5) / 780mm travel (29) L: 780mm (27.5) / 780mm (29) XL: 780mm (29) XXL: 780mm (29) Grips Giant Sole-O Stem Giant Sport 7-degree XS: 40mm (27.5) S: 50mm (27.5) / 50mm (29) M: 60mm (27.5) / 60mm travel (29) L: 70mm (27.5) / 70mm (29) XL: 80mm (29) XXL: 90mm (29) Seatpost Giant Sport 30.9 XS: 300mm (27.5) S: 300mm (27.5) / 375mm (29) M: 375mm (27.5) / 375mm travel (29) L: 375mm (27.5) / 375mm (29) XL: 375mm (29) XXL: 375mm (29) Saddle Giant Custom Pedals MTB Platform Shifters Shimano Altus M2010 2x9 Front Derailleur Shimano Altus M2020 Rear Derailleur Shimano Altus M2000 Brakes Tektro HDC M275 hydraulic Tektro rotors [F]180mm [R]160mm Brake Levers Tektro HDC M275 Cassette Shimano Deore HG200 11x32 Chain KMC X9 Crankset ProWheel forged 22/36 XS: 165mm (27.5) S: 170mm (27.5) / 170mm (29) M: 170mm (27.5) / 175mm travel (29) L: 175mm (27.5) / 175mm (29) XL: 175mm (29) XXL: 175mm (29) Bottom Bracket ProWheel cartridge Rims Giant GX03V 29 or 27.5 alloy double wall 21mm inner width Hubs alloy sealed bearing Tyres Kenda Booster 27.5 or 29x2.2' wire bead
PUSH THE PACE ON CLIMBS LET LOOSE ON THE DESCENTS. THIS ALUMINIUM HARDTAIL GIVES YOU A FEEL FOR THE TRAIL WITH BALANCED CONFIDENT HANDLING AND A PLUSH SUSPENSION FORK. KEY PERFORMANCE FACTORS Proven alloy performance ALUXX aluminium frameset is hand-built in-house by the world leader in aluminium engineering. Balance and stability Frame geometry is designed to optimize the balance and roll-over capabilities of 29-inch wheels or the liveliness of 27.5-inch wheels (depending on frame size). XC control Suspension fork offers either 80mm or 100mm of smooth travel for added XC control. Sizes 27.5: XSSML 29: SMLXLXXL Frame ALUXX-Grade Aluminum disc Fork SR Suntour XCM30 QR steel steerer XS: 80mm travel (27.5) S: 80mm travel (27.5) / 100mm travel (29) M: 100mm travel (27.5) / 100mm travel (29) L: 100mm travel (27.5) / 100mm travel (29) XL: 100mm travel (29) XXL: 100mm travel (29) Handlebar Giant Connect Trail 31.8mm XS: 730mm (27.5) S: 780mm (27.5) / 780mm (29) M: 780mm (27.5) / 780mm travel (29) L: 780mm (27.5) / 780mm (29) XL: 780mm (29) XXL: 780mm (29) Grips Giant Sole-O Stem Giant Sport 7-degree XS: 40mm (27.5) S: 50mm (27.5) / 50mm (29) M: 60mm (27.5) / 60mm travel (29) L: 70mm (27.5) / 70mm (29) XL: 80mm (29) XXL: 90mm (29) Seatpost Giant Sport 30.9 XS: 300mm (27.5) S: 300mm (27.5) / 375mm (29) M: 375mm (27.5) / 375mm travel (29) L: 375mm (27.5) / 375mm (29) XL: 375mm (29) XXL: 375mm (29) Saddle Giant Custom Pedals MTB Platform Shifters Shimano Altus M2010 2x9 Front Derailleur Shimano Altus M2020 Rear Derailleur Shimano Altus M2000 Brakes Tektro HDC M275 hydraulic Tektro rotors [F]180mm [R]160mm Brake Levers Tektro HDC M275 Cassette Shimano Deore HG200 11x32 Chain KMC X9 Crankset ProWheel forged 22/36 XS: 165mm (27.5) S: 170mm (27.5) / 170mm (29) M: 170mm (27.5) / 175mm travel (29) L: 175mm (27.5) / 175mm (29) XL: 175mm (29) XXL: 175mm (29) Bottom Bracket ProWheel cartridge Rims Giant GX03V 29 or 27.5 alloy double wall 21mm inner width Hubs alloy sealed bearing Tyres Kenda Booster 27.5 or 29x2.2' wire bead
GET ON THE DIRT AND RIDE YOUR WAY TO YOUR FIRST SINGLETRACK. TEMPT IS THAT FRIEND THAT OPENS A WHOLE NEW WORLD TO YOU. Confidence Inspiring Perfect as your first mountain bike the ALUXX-Grade Aluminium frame is lightweight capable and durable. Versatile Tempt’s performance-minded yet comfortable geometry gives it the versatility for both commutes around campus and off-road rides. XC Control A suspension fork offers control comfort and stability over bumpy terrain. Depending on frame size the fork comes with 80mm or 100mm of travel. Sizes 27.5': XSSM 29': SML Colours Liquid Metal Frame ALUXX-Grade Aluminum disc Fork SR Suntour XCM QR steel steerer XS: 80mm travel (27.5) S: 100mm travel (27.5) / 100mm travel (29) M: 100mm travel (27.5) / 100mm travel (29) L: 100mm travel (29) Shock N/A Handlebar Giant Connect Trail 31.8mm XS: 670mm (27.5) S: 670mm (27.5) / 670mm (29) M: 750mm (27.5) / 750mm travel (29) L: 750mm (29) Grips Giant Sole-O Stem Giant Sport 7-degree XS: 40mm (27.5) S: 40mm (27.5) / 40mm (29) M: 50mm (27.5) / 50mm travel (29) L: 50mm (29) Seatpost Giant Sport 30.9 XS: 300mm (27.5) S: 300mm (27.5) / 375mm (29) M: 375mm (27.5) / 375mm travel (29) L: 375mm (29) Saddle Liv Sport Pedals MTB platform Shifters Shimano Altus M2010 2x9 Front Derailleur Shimano Altus M2020 Rear Derailleur Shimano Altus M2000 Brakes Tektro HDC TKD 149 hydraulic Tektro rotors [F]180mm [R]160mm Brake Levers Tektro TKD 149 Cassette Shimano Deore HG200 11x32 Chain KMC X9 Crankset ProWheel forged 22/36 XS: 165mm (27.5) S: 165mm (27.5) / 170mm (29) M: 170mm (27.5) / 170mm travel (29) L: 175mm (29) Bottom Bracket ProWheel cartridge Rims Giant GX03V 29 or 27.5 alloy double wall 21mm inner width Hubs alloy sealed bearing Spokes Stainless steel Tyres Kenda Booster 27.5 or 29x2.2' wire bead Extras 2.4' max tire size Weight The most accurate way to determine any bike’s weight is to have your local dealer weigh it for you. Many brands strive to list the lowest possible weight but in reality weight can vary based on size finish hardware and accessories. All our bikes are designed for best-in-class weight and ride quality.
GET ON THE DIRT AND RIDE YOUR WAY TO YOUR FIRST SINGLETRACK. TEMPT IS THAT FRIEND THAT OPENS A WHOLE NEW WORLD TO YOU. Confidence Inspiring Perfect as your first mountain bike the ALUXX-Grade Aluminium frame is lightweight capable and durable. Versatile Tempt’s performance-minded yet comfortable geometry gives it the versatility for both commutes around campus and off-road rides. XC Control A suspension fork offers control comfort and stability over bumpy terrain. Depending on frame size the fork comes with 80mm or 100mm of travel. Sizes 27.5': XSSM 29': SML Colours Liquid Metal Frame ALUXX-Grade Aluminum disc Fork SR Suntour XCM QR steel steerer XS: 80mm travel (27.5) S: 100mm travel (27.5) / 100mm travel (29) M: 100mm travel (27.5) / 100mm travel (29) L: 100mm travel (29) Shock N/A Handlebar Giant Connect Trail 31.8mm XS: 670mm (27.5) S: 670mm (27.5) / 670mm (29) M: 750mm (27.5) / 750mm travel (29) L: 750mm (29) Grips Giant Sole-O Stem Giant Sport 7-degree XS: 40mm (27.5) S: 40mm (27.5) / 40mm (29) M: 50mm (27.5) / 50mm travel (29) L: 50mm (29) Seatpost Giant Sport 30.9 XS: 300mm (27.5) S: 300mm (27.5) / 375mm (29) M: 375mm (27.5) / 375mm travel (29) L: 375mm (29) Saddle Liv Sport Pedals MTB platform Shifters Shimano Altus M2010 2x9 Front Derailleur Shimano Altus M2020 Rear Derailleur Shimano Altus M2000 Brakes Tektro HDC TKD 149 hydraulic Tektro rotors [F]180mm [R]160mm Brake Levers Tektro TKD 149 Cassette Shimano Deore HG200 11x32 Chain KMC X9 Crankset ProWheel forged 22/36 XS: 165mm (27.5) S: 165mm (27.5) / 170mm (29) M: 170mm (27.5) / 170mm travel (29) L: 175mm (29) Bottom Bracket ProWheel cartridge Rims Giant GX03V 29 or 27.5 alloy double wall 21mm inner width Hubs alloy sealed bearing Spokes Stainless steel Tyres Kenda Booster 27.5 or 29x2.2' wire bead Extras 2.4' max tire size Weight The most accurate way to determine any bike’s weight is to have your local dealer weigh it for you. Many brands strive to list the lowest possible weight but in reality weight can vary based on size finish hardware and accessories. All our bikes are designed for best-in-class weight and ride quality.