Unique Design The Enduroguard mudguard is an awesome front or rear mudguard. As a front mudguard it's amazing at stopping the mud and spray that’s thrown into your eyes from the back of the front wheel. Just snap off the round holes either side of the RRP logo and it becomes an effective rear mudguard protecting your linkages and shock from getting hammered. There is also a neat design feature of the “Seal Guard”, this enhanced bulge is specifically designed to give additional protection to your fork seals. Standard Size This Standard size is small enough to look right on short travel forks found on 4X and Cross Country/trail bikes, the fork brace is also usually closer to the stanchion so we have moved the holes for a more appropriate fit for smaller travel forks. Large Size This Large size offers great protection and is big enough to fit the longer travel forks found on Gravity Enduro and Downhill bikes, the fork brace on these forks are typically further away from the stanchions so we have moved the holes accordingly for a better fit. Usage The Enduroguard is designed as a front or rear mudguard and has been specifically adapted to do both jobs extremely well, the holes that are correct for fitting to the front forks do not work when using them to fit as a rear mudguard (unless the bike has a dropped rear brace), the snap off holes allows you to rotate the guard forward for better tyre clearance and protection. Clean with a hose or jet was, no chemicals are needed and may degrade the print over time. Seal Guard This additional bulge has been added and refined to offer additional protection for your seals against the relentless attack from spray and mud without affecting the fit or aesthetics, you will be grateful for this feature on those extremely wet rides prolonging the life of your fork seals. Front Mudguard The 'T' shape clamping points are designed to wrap around the fork leg providing a better and neater fit. The front of the mudguard is designed to offer slightly increased protection without spoiling the look of the mudguard. The wider curve with flat rear end offers maximum protection and frame clearance compared to a simple symmetrical curve. The main holes for the standard and the large are located in slightly different places, this reflects the typical differences between fork braces on long and short travel forks. Rear Mudguard The holes for the fork brace aren't ideally located when using it as a REAR mudguard, so there are 2 snap-off holes to allow you to rotate the guard forward and attach it to the brace between the rear stays (NB: The snap off holes are available on both the Standard and the Large sizes). This feature creates more mud/tyre clearance and a much better fit (although you can still use the main holes for the small number of bikes that have a dropped rear brace). Choose either the Standard or Large size depending on what rear protection you want to achieve (Standard would be the default size recommendation). Graphics Our product displays cool looking 2 tone screen printed graphics with our awesome Evil Eyes logo on the front to finish off the look nicely. Material RRP have taken a more expensive route opting for a custom thickness of polypropylene to meet their requirements, they felt the standard "off the shelf" options were either too thick (1.2mic) or too thin (0.8mic), their custom material sits squarely in-between. This offers the best of both worlds; the durability and quality feel that a thicker material gives, combined with the fit flexibility that a thinner material delivers. Zip Ties All sizes and colours will come with black coloured zip ties made to a custom length. Fitting Instructutions (also on sticker attached to rear of guard) Front 1) Remove the 4 zip ties supplied and insert them into all the holes as shown below 2) Bend and slide mudguard into position from the front 3) Loosely fasten up the top zip ties around the fork brace first then the legs 4) Centralise and then tighten up the top zip ties REAL tight so it won't move 5) Rotate the bottom zip ties until you get the desired angle and then tighten 6) Cut off any excess from the zip ties and rotate them out of the way Rear 1) Remove the snap-off holes either side of RRP logo as highlighted in red below 2) Loosely attach the zip ties to the rear stays and brace 3) Align to give you the correct tyre clearance 4) Now do up all the zip ties REAL tight
Another quality product from Scicon.
The DeFeet Wool Line Wool is a staple of the DeFeet line. DeFeet source the highest grade wools on the planet. Combined with DeFeet construction the result is the finest wool sock that you can buy. The DeFeet wool line is continually growing. Wool has attributes that can't be found in other fibres. DeFeet wool socks stay cooler in the heat because of the construction of the mesh. They stay warmer when they are wet and in cooler temperatures because of the amazing thermal properties of the fabric. The Woolie Boolie could be easily described as a mid-weight sock, which is roughly twice the thickness of the Aireator. Like all Defeet wool socks, it's made of superior quality Merino Wool. Merino wool breathes better than just about any other wool out there. Being a natural fibre, wool has intrinsic wicking capabilities understood only by sheep and wearers of DeFeet wool socks. Let's just say you have to wear them to understand. These socks are also versatile; keeping you warm in the chilly Winter and cool during the heat of Summer.
FSA headsets are carefully engineered and updated to deliver the highest performance and value. Headset Guide click here
The new over sized Pista bar is also suitable for fixies thanks to the extended cylindrical shape of its central part (130 mm/size 42) which allows enough room to fit the brakes levers. Brilliant the new 7° slight bend of the drop for the masters of skidding. But it still retains it's shape which is sure to make it another huge favourite for the serious trackies out there.
Energy Bars have a proven balance of simple and complex carbohydrates for both fast and sustained energy. They have been race tested by thousands of athletes in the toughest competitions around the World and have consistently out-performed every other energy bar. And that claim is backed by independent research and 5 years of Best Product Awards. From a weekend hike to the most intense competition at International level, you can rely on Energy Bars because they have been proven to help you perform at your best. Please note that High5 have given their products a fresh new look, but you may receive a product in older packaging while our stocks transition to the newly branded stock. However, whichever you receive you’ll still enjoy the same awesome formulations and tastes you know and love. Directions for Use Designed for sports use or as a healthy snack as part of an active lifestyle. The High5 Energy Bar has been used for: Long distance triathlons, endure MTB events, hill walking, multi-day endurance racing, cyclo sportives, trekking to the poles, cross pacific rowing and swim meets. It’s also great as part of a carb-loading diet.
This small, nickel plated wrench is ideal for use on cycle brakes and derailleurs. Available in 8/10mm and 9/11mm sizes to suit most manufacturers, both sizes feature a hole to allow hanging on your tool wall.
The innovative spring-loaded arm holds bike by the tyre and the three point contact secures the wheel in place. Wheel slot accommodates all types of bikes from 20mm road tyres up to 2.4" wide MTB tyres in size 20" to 29" wheels. Hands-free use, simply roll the bike into the wheel slot and the swing arm holds it steady. This Feedback Sports Rakk bicycle storage stand includes clips to allow connecting two or more stands together to create versatile storage or retail floor display. Also great for the home and garage. Arm locks down for easy transport. Perfect in the garage or an apartment for convenient storage of one or more bikes.
The DeFeet Wool Line Wool is a staple of the DeFeet line. DeFeet source the highest grade wools on the planet. Combined with DeFeet construction the result is the finest wool sock that you can buy. The DeFeet wool line is continually growing. Wool has attributes that can't be found in other fibres. DeFeet wool socks stay cooler in the heat because of the construction of the mesh. They stay warmer when they are wet and in cooler temperatures because of the amazing thermal properties of the fabric. For those of us that like things natural, DeFeet has produced 2 distinct kinds of wool socks for our enjoyment. First was the Woolie Boolie - tell me you don't like that name! It was an entirely new program for us - designed from the ground up with comfort, insulation and dryness in mind. The Woolie Boolie could be easily described as a mid-weight sock, which is roughly twice the thickness of the Aireator. Like all our wool socks, it's made of superior quality Merino Wool. Merino wool breathes better than just about any other wool out there. Being a natural fibre, wool has intrinsic wicking capabilities understood only by sheep and wearers of DeFeet wool socks. Let's just say you have to wear them to understand. These socks are also versatile; keeping you warm in the chilly Winter and cool during the heat of Summer.
For improved air flow and comfort the two Powa Elite valves on the Cinqro mask allow faster air flow characteristics when breathing out at elevated rates. This equates to less back pressure, less dampness in the filter, improved filtration, lower inhalation resistance all of which result in improved comfort and performance. The Cinqro package incorporates a complete mask fitted with a Hepa-Type particle filter for filtering submicron particles like diesel smoke, pollen, brake lining dust and any aqueous water vapour particles that can carry various chemicals in the air. A spare DACC chemical/particle filter is also supplied as part of the package allowing filter interchange ability making the Cinqro mask suitable for use in a wider variety of environments from inner cities to the countryside.
With a removable free-angle nose to help with a smoother inner cable line when exiting the outer.
Click here to see what Staff Rider Tim thought of the INpower 3D+ MAS Power Meter.