The ULTRALIGHT mask is manufactured from a 4-way stretch, air permeable (allows air to pass) technical fabricImproved breathability for hot and humid conditionsComes with black/silver Powa Elite valves and a black/silver unbreakable nose clip and carry bagThe Hepa-Type sports filter is installed as standard; the perfect 2.5PM filter for urban areas high in diesel particulates or travelling in hot dusty conditions.
Stages Power Right for Shimano Dura-Ace 9100 or Ultegra R8000 is a right side only power meter that will transform new and existing Gen 2 Stages Power meters into a dual-sided power option.Specifications:Accuracy: ± 1.5%,Weight: Only less than 15gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 - 2500,Cadence range (rpm): 20 - 220,Water resistance rating: IPX7,Frame Compatibility: Most frames, see fit guide in our Support section,Chainring Compatibility: 53 x39, 52x36, 50x34,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Stages Link, Today's Plan, Training Peaks, Strava, Garmin Training Center and others,Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
From Road and Cross-Country disciplines to World Cup DH podiums, the Fly is one of stiffest and most dependable performance tools in the SDG portfolio. The I-Fly uses a nylon glass fibre, solid beam constructed base, with a honeycomb core, creating one of the lightest strength to weight saddle connections in the world. All Fly models incorporate an EVA foam, minimalistically designed with a snag-less, flat-forward, NO BS approach. Ideal for advanced cyclists with limited seated movements and those who prefer narrower, stiffer saddles. The Fly series is for power and performance, catering to a wide spectrum of disciplines and available in multiple designs. Light and strong technologically advanced with minimalistic design., Flat forward platform., Rear buzz-cut., Lightweight EVA foam., Lowered profile nylon glass base., 2 piece cover with kevlar sides., I-Beam Technology:, Patented SDG Monorail Technology., Honeycomb Structure reduces weight., Micro fine-tuning for precision fit., Ultimate strength to weight ratio.. Weight: TBC., Dimensions: 257mm x 128mm., Disciplines: Mtn (XC, Trail, Enduro, DH), CX, & Road (Endurance & Racing)..
Di2 internal cable routing compatible. Easton's new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters and brakes in both the hoods and drops. Key Features: Width (C to C) - 40, 42, 44cm at hoods (at drops +68mm)., Flare - 16 degrees., Weight - 42cm 220g., Clamp Diameter - 31.8mm., Reach - 80mm., Drop - 120mm., Material - EC70 Carbon., Di2 internal cable routing compatible..
The name Revolution explains it all, a tread design that rolls faster than a slick, while providing traction in a range of conditions. Micro-effective edges form a staircase of grooves in the direction of cornering force, and channel water away from the centre. E-bike compliant Graphene compound rolls fast, and when used on an e-bike, extends battery life. Reflective sidewall stripe increases your visibility for oncoming motorists. The Solid Shielding puncture protection layer makes punctures a thing of the past. As with all Vittoria Tech Series tyres, the mix of performance and durability add up to a great valueGRAPHENE 2.0 compound minimizes battery usage on e-bikes,3mm anti-puncture protection layer and reflective sidewall stripe for safety,Tread design that rolls faster than a slick, while providing traction in a range of conditions.Key Features:Material: Nylon 26 TPI,Discipline: Urban,Bead: Rigid Bead.
Designed to win, the new KEO BLADE CARBON CERAMIC improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to daily input from the greatest of champions.Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON CERAMIC has all the assets to allow you to improve and optimize your performance until victory is yours. It is for these reasons that KEO BLADE CARBON CERAMIC is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements.The KEO BLADE CARBON CERAMIC has the best weight / power ratio in its class.Its new design completely integrates the blade for unrivaled aerodynamics. Equipped with a carbon body and blade, the Blade Carbon Ceramic is available in a CrMo version (chromoly spindle) for a weight of 110g per pedal. It is available in three tension release levels: 12,16 and 20.Every component, every ball is meticulously selected to ensure the highest level of quality and performance. The balls are precisely calibrated one by one by a machine, down to the micrometer. They are then ordered according to size in perfectly-adapted rings, with the result that every bearing has a totally unique structure.The spindle of the new CARBON BLADE CERAMIC has been completely redesigned. It is built around an oversized axle and spindle that passes through internal roller and ceramic bearings located directly under the pedal platform. This new construction saves approximately 2 watts at 100 rpm.To meet the demands of the most demanding cyclists, especially competitors, the pedal-cleat system must allow efficient power transfer thanks to a broad and rigid platform.The platform of the CARBON BLADE CERAMIC is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle.Using a carbon body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer.
The Look Keo Blade Carbon improves the performance and experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to the daily input from the greatest of champions. Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours.The Keo Blade Pedals are currently being used by 7 UCI World Tour Teams including Lotto-Soudal, Astana-Premier Tech and AG2R CITROEN LA MONDIALE and more. Lightweight, aerodynamic and powerful, this pedal provides the riders with an incredible platform to keep improving and optimizing performance on the road to victory.Key Features:Technology: Blade Carbon,Tention: 12 or 16 or 20,Body: Carbon,Spindle: Chromoly +,Platform Material: Stainless Steel/INOX,Platform Area: 700mm²,Platform Width: 67mm,Stack Height + Cleats: 14,8mm,Weight Pedal: 110g,Weight Pair + Cleat: 288g,.
Replacement pins for TAG T1 Pedals, available in a variety of colours, 4mm or 8mm lengths and either Cone or Hex shapes.
The Kids Transitions feature a simple slip on fit and heat moulding foam.Our super light Kids Transition pads are designed for the little rippers out there that ride scoot bikes to pedal bikes. The Kids Transition pads mould with body heat to provide maximum comfort with a breathable mesh back panel to wick moisture away from the skin.Key Features:SUPER LIGHTWithout compromising on safety and surpassing the relevant CE test the Transition pads offer comfortable protection in a super light package.COMPRESSION FITDesigned to keep weight down the compression fit, the slip-on design fits higher on the thigh than most pads. An internal silicone strip keeps the pads from slipping down.BREATHABLE SOCKRunning the length of the pad in the rear and extending across the lower front a breathable 4-way stretch mesh maintains airflow for all-day comfort.
High performance 26oz bottles with tons of style. Purist technology shields the bottle from any bad taste, mold, or staining…bottom line is nothing sticks. Made in California and BPA free. It’s like drinking from a glass, nothing tastes better.Key Features: Food-safe LDPE #4 plastic, Made in California, Medical Lab Technology, Screen Printed, 26oz..
The Series One was our first frame back in 2000! It was a straight-forward, clean BMX frame that helpedredefine what was necessary and what wasn’t. Twenty-one years later, The Series One is a high-quality com-plete bike that rides well and is priced to sell, with everything riders need and nothing they don’t. With threeTopTube sizes and proportional components, there’s an S1 for anyone looking for a 20” BMX bike. Responsivebut stable geometry, traditional fork off-set, and comfortable 2-pc bars, these bikes work for any style of riding.One glance at these in person will have you wondering if you’ve hung the wrong price tag on them.
Custom bearings and high performance seals in all e*thirteen bottom brackets deliver supreme durability and smooth spinning.