If you’re looking for a versatile gilet that works as a technical mid-layer but is just as good as a warm everyday outer-layer, the Föhn Micro Synthetic Down Gilet does it all. It’s so light and packable and resistant to the elements, there’s no reason to not throw it in your rucksack. PrimaLoft® Insulation ThermoPlume®: Changing the world, one gilet at a time Föhn has partnered with world-leading insulation specialists, PrimaLoft® to make high-performance outdoor clothing without impacting the environment. PrimaLoft® Insulation ThermoPlume® is a 100% post-consumer insulation comprised of small, silky plumes of fibre that mimic the lightweight warmth, softness and compressibility of natural goose down. Made from 100% post-consumer recycled (PCN) polyester, this all-synthetic package features down comparable performance insulating loft, wet weather protection and compressibility. Backed by a history of sustainably conscious innovations, industry leadership for PrimaLoft® includes a Relentlessly Responsible™ commitment to pushing both performance and sustainability forward. They make performance-driven insulation fibres from plastic water bottles, and PrimaLoft® has saved more than 339 million plastic water bottles from landfills and oceans since 2007. Packability Constructed with micro baffles for a slim profile that makes it perfect for layering, this gilet is super packable, folding into the internal pocket. Both shell and gilet lining are made from 100% Recycled Nylon, which is wind resistant and synthetic down proof with a durable water-repellant (DWR) treatment. Fully Featured Two zipped hand pockets, lined with brushed fabric to add warmth and comfort. An adjustable lower hem is there to let you lock in as much warmth as possible, and a YKK zip with a silicone-grippy puller is easy to open and release heat even with gloves on. Recycled polyester Made by melting down existing plastic and re-spinning it into new fibres, recycled polyester production requires less energy and reduces CO2 emissions when compared to virgin polyester. Föhn uses Global Recycled Standard (GRS) certified rPET. GRS provides certification of recycled input, chain of custody, social and environmental practices, and use of hazardous chemicals during production.
If you’re looking for a versatile jacket that works as a technical mid-layer but is just as good as a warm everyday jacket, the Föhn Women's Micro Synthetic Down Hooded Jacket does it all. It’s so light and packable and resistant to the elements, there’s no reason to not throw it in your rucksack. PrimaLoft® Insulation ThermoPlume®: Changing the world, one jacket at a time Föhn has partnered with world-leading insulation specialists, PrimaLoft® to make high-performance outdoor clothing without impacting the environment. PrimaLoft® Insulation ThermoPlume® is a 100% post-consumer insulation comprised of small, silky plumes of fibre that mimic the lightweight warmth, softness and compressibility of natural goose down. Made from 100% post-consumer recycled (PCN) polyester, this all-synthetic package features down comparable-performance insulating loft, wet weather protection and compressibility. Backed by a history of sustainably conscious innovations, industry leadership for PrimaLoft® includes a Relentlessly Responsible™ commitment to pushing both performance and sustainability forward. They make performance-driven insulation fibres from plastic water bottles, and PrimaLoft® has saved more than 339 million plastic water bottles from landfills and oceans since 2007. Packability Constructed with micro baffles for a slim profile that makes it perfect for layering, this jacket is super packable, folding into the internal pocket. Both shell and jacket lining are made from 100% Recycled Nylon, which is wind resistant and synthetic down proof with a durable water-repellant (DWR) treatment. Fully Featured Two zipped hand pockets, lined with brushed fabric to add warmth and comfort. Elasticated cuffs and an adjustable lower hem are there to let you lock in as much warmth as possible, and a YKK zip with a silicone-grippy puller is easy to open and release heat even with gloves on. Recycled polyester Made by melting down existing plastic and re-spinning it into new fibres, recycled polyester production requires less energy and reduces CO2 emissions when compared to virgin polyester. Föhn uses Global Recycled Standard (GRS) certified rPET. GRS provides certification of recycled input, chain of custody, social and environmental practices, and use of hazardous chemicals during production.
If you’re looking for a versatile gilet that works as a technical mid-layer but is just as good as a warm everyday outer-layer, the Föhn Women's Micro Synthetic Down Gilet does it all. It’s so light and packable and resistant to the elements, there’s no reason to not throw it in your rucksack. PrimaLoft® Insulation ThermoPlume®: Changing the world, one gilet at a time Föhn has partnered with world-leading insulation specialists, PrimaLoft® to make high-performance outdoor clothing without impacting the environment. PrimaLoft® Insulation ThermoPlume® is a 100% post-consumer insulation comprised of small, silky plumes of fibre that mimic the lightweight warmth, softness and compressibility of natural goose down. Made from 100% post-consumer recycled (PCN) polyester, this all-synthetic package features down comparable-performance insulating loft, wet weather protection and compressibility. Backed by a history of sustainably conscious innovations, industry leadership for PrimaLoft® includes a Relentlessly Responsible™ commitment to pushing both performance and sustainability forward. They make performance-driven insulation fibres from plastic water bottles, and PrimaLoft® has saved more than 339 million plastic water bottles from landfills and oceans since 2007. Packability Constructed with micro baffles for a slim profile that makes it perfect for layering, this gilet is super packable, folding into the internal pocket. Both shell and gilet lining are made from 100% Recycled Nylon, which is wind resistant and synthetic down proof with a durable water-repellant (DWR) treatment. Fully Featured Two zipped hand pockets, lined with brushed fabric to add warmth and comfort. An adjustable lower hem is there to let you lock in as much warmth as possible, and a YKK zip with a silicone-grippy puller is easy to open and release heat even with gloves on. Recycled polyester Made by melting down existing plastic and re-spinning it into new fibres, recycled polyester production requires less energy and reduces CO2 emissions when compared to virgin polyester. Föhn uses Global Recycled Standard (GRS) certified rPET. GRS provides certification of recycled input, chain of custody, social and environmental practices, and use of hazardous chemicals during production.
Made with an ultra-lightweight and sweat-wicking fabric on the body and breathable side and back panelling for extra ventilation during your run or workout. Designed with a slightly looser athletic cut, medium sleeve length and a relaxed hem.
The Vector's distinctive lines are tailored to enhance the performance of a top-level race bike.
This Fox Float DPX2 Factory MTB shock features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade for smoother and more reliable performance. Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. Three-position lever with adjustable Open Mode offers 10 clicks to fine-tune compression. Recirculating oil damper design for more control. EVOL Air Sleeve: Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer Part Numbers: 190mm, 45mm Stroke: 973-01-314 210mm, 50mm Stroke: 973-01-315 210mm, 52.5mm Stroke: 973-01-316 210mm, 55mm Stroke: 973-01-317 230mm, 65mm Stroke: 973-01-312 230mm, 60mm Stroke: 973-01-313 185mm, 44mm Stroke: 973-01-318 190mm, 50mm Stroke: 973-01-304 200mm, 50mm Stroke: 973-01-305 200mm, 57mm Stroke: 973-01-306 215mm, 65mm Stroke: 973-01-307
Ready for E-MTB trail adventures, this wheelset is equipped with two asymmetrical maxtal aluminium rims which offer an excellent balance of strength and durability on the most demanding of terrain conditions. Mavic has also kitted out this model with a Black Shield treatment that protects the rims against impacts and scratches, so they look as awesome as they perform on your ride. Another highlight is its disc brake compatibility, which means that you'll benefit from powerful and consistent braking performance as you conquer your way from trail to trail. Built specifically for electric mountain bike riding, it comes trail-ready with some unique technologies to help you ride smoother and have more fun on the trail. E-MTB Wheelset with Pinch Flat Protection Mavic's patented Pinch Flat Protection (PFP) technology features rims with a wider contact surface at the top of the sidewall, which significantly reduces the risk of tyre cuts and punctures. The wider 35mm rims allow you to run lower tyre pressure for better traction, and the rims pair perfectly with trail tyres ranging from 2.6 to 3.2 inches. In addition, Mavic's patented Fore technology features a fully sealed upper rim bridge that eliminates the need for rim tape, making it the easiest system for mounting and changing tubeless tyres. ISM Machining and ID360 Double Ratchet System ISM machining removes material from the rims in strategic areas to minimise weight without compromising strength. Mavic uses 28 straight-pull spokes (same spoke length throughout) for a strong connection between the rim and hub, which has an ultra-reliable Instant Drive 360 (ID360) double ratchet system for quick engagement and acceleration. Set up for disc brakes with Centre Lock rotor compatibility, the Mavic E-Deemax S 35 Disc MTB Wheelset is available for Shimano Micro Spline freewheel bodies and comes with UST tubeless valves, spare spokes and accessories. Additional Item Top Features: Freehub: Shimano Micro Spline Rear Axle: 12x148mm Boost thru-axle Front Axle: 15x110mm Boost, convertible to 20x110mm Boost thru-axle with adaptors (available separately) Brake Type: Disc brake Brake Rotor Compatibility: Centre Lock Hub Technology: QRM Auto bearing preload technology, Instant Drive 360 freewheel technology Hub Width: Boost only (Front: 110mm; Rear: 148mm) Spoke Material: Steel Spoke Lacing: Front and rear crossed 3, contactless Spoke Count: Front: 28; Rear: 28 Spoke Shape: Straight-pull, flat, double-butted Nipples Material: Fore Integrated Aluminium ASTM Category 5: Gravity riding focused on the descent Recommended Tyre Sizes: 65mm to 81mm (2.5" to 3.2") Max Rider Weight: Mavic recommends that the total weight supported by the wheels doesn't exceed 150kg (bike included) Included: Fore adjustment wrench, 2x replacement spokes with each wheel, Multifunction adjustment wrench (delivered with rear wheel) and UST valve and accessories Technologies: ISM Light Rim Technology: An exclusive Mavic patented concept, ISM involves the machining of the lower bridge of the rim between each spoke hole to create a light and rigid rim without reducing the durability of the rim. UST Tubeless Technology: Universal Standard for Tubeless. Ready to ride tubeless system. The UST concept improves traction, control and comfort whilst reducing inertia and flats. Black Shield Treatment: MTB rim treatment. 2x superior lifetime against rock impacts and scratches. SUP Welding Technology: Soudé Usiné Process. After bending, the rim joint is arc welded. The welded seam is then milled for a smooth finish. Pinch Flat Protection: 20% less risk of puncture with PFP. An E-bike-specific innovation to significantly reduce the risk of tyre cuts and punctures. QRM Auto Bearing Preload Technology: Cartridge bearings are double sealed with C3 internal clearance. Their preload is automatically adjusted to guarantee a perfect spin with no play in the long run. Instant Drive 360 Freewheel Technology: The Instant Drive 360 freewheel system is super light and fast to engage with only 9°. A large contactless rubber seal provides low friction, while a wide array of end caps makes it super versatile. Manufacturer's Part Number: LP1629100 Black 27.5" Micro Spline
The Vector's distinctive lines are tailored to enhance the performance of a top-level race bike. The CrMo rails add strength to your saddle.
This front thru-axle features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks. The axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it. All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle. Please note: Not compatible with 2021 Fox 36mm / 38mm forks. Diameter Axle Length Thread Pitch Thread Length RockShox 15mm Boost 158mm 1.5 10mm Fox 15mm Boost Not compatible with 2021 36mm / 38mm 155mm 1.5 13.5mm Click here for Nukeproof’s technical information.
Made from a durable but lightweight synthetic material, and featuring copious mesh zones, these shoes deliver quick-drying times and excellent ventilation. Add in a wide opening, wide main closure strap and offset heel-pull tab, and these shoes are easy to slip on and secure under pressure, making for a smooth transition. The material also provides the support you need to hold your foot securely. Combined with the stiff carbon sole, this ensures no watts are wasted as you put the hammer down. While ventilation holes provide extra airflow to your feet, regulating temperature in warmer weather and also speeding up drying. Fitting notes dhb shoes fit true to size. This means they often come up smaller than other cycling or triathlon shoes. We recommend you buy these shoes one size smaller than your usual cycling shoe size.