DJD BD Driver 1/8", CNC Cr-mo - Fits Halo DJD BD Hub. 1/8" for SSCNC Steel Driver to fit all Halo DJD Bush hubs.,Driver includes Bush, Pawls and spring.,This driver takes screw on DJD Bush Drive cogs. It does not have a cog attached, cogs must be purchased separately.**Note: NOT compatible with old bearing type DJD hubs**
MX Supa Drive Driver Body9T Supadrive (Singlespeed) ,Driver for S.Drive MX Hub,RHD and LHD versions.
Berlin has some of the toughest streets on the planet.Berlin bicycle couriers asked us to give more puncture protection to their favourite tyre, so we did! The Berlin spec. High-densityanti-puncture version of Courier tyre has a 2.5mm thick Anti-puncture strip instead of the normal 1mm puncture protection system strip.Available only in Black.700 x 24C - Weight: 415g700 x 29C - Weight: 475g.Safety note: Hard compound gives increased wear resistance...but, should Only be used on rear position... as hard compound has reduced grip, which is not ideal for front tyre use.Please select non HC versions for front use.
Special pads to suit Carbaura Carbon road rims3 types availableCampagnolo pre 2012 ,Campagnolo 2012 and onwards,Shimano.SpecificationsColour Grey.
The Hamax Rain Cover is specially designed for Hamax child bike seats. It fits snugly around the child bike seat, protecting it from rain and wind when it is not in use.
Extra bar for adjustmentDo you need to adjust the seat? It is possible to increase incline, reduce incline, lower the seat or adjustment for small frames with an extra bar. Available for Kiss, Sleepy, Smiley, Caress, Siesta and Zenith.
Natural springing and protects the child’s spineThe Kiss helps to make bike rides simple and safe when you go cycling with a child on board. The Hamax freely suspended fastening bracket gives natural springing and protects the child’s spine during the trip.Easily attached to the child!Adjustable safety harness and footrests!All Hamax child bike seats are designed to ‘grow’ with the child via an adjustable safety harness and footrests. The child bike seat may be easily attached to and removed from the bike. By purchasing an extra bracket, you may easily switch the child bike seat between two bikes. Hamax recommends that a child should always wear a helmet when using a child bike seat.FeaturesErgonomic sitting position,Safe and flexible belt system with belt buckles that cannot be opened by the child itself,Safe and simple to fit,May be fitted to bikes with or without luggage carriers,For children above the age of 9 months and weighing up to 22 kg,Adjustable safety harness and legrests,The child bike seat may be easily attached to and removed from the bike,A suspended fastening bracket ensures excellent cushioning,Fits frame tubes from 28-40 mm (round),The fastening system will not get caught up with cables in the fastening area,Approved: TÜV/GS EN14344 Approved ,Dimensions: 48x38, 5x70 cm/3.6 kg,Material: Polypropylene (PP), UV stabilised material.
Extra bar for adjustmentDo you need to adjust the seat? It is possible to increase incline, reduce incline, lower the seat or adjustment for small frames with an extra bar. Available for Kiss, Sleepy, Smiley, Caress, Siesta and Zenith.
gives natural springing and protects the child’s spineThe Smiley helps to make bike rides simple and safe when you go cycling with a child on board. The Hamax freely suspended fastening bracket gives natural springing and protects the child’s spine during the trip.Easy to secure the childThe extra chest buckle makes it easy to secure the child with one hand, while the bike is held steady with the other hand. The chest buckle prevents any conflict with the helmet when the child is being placed into or lifted out of the seat. The child bike seat may be easily attached to and removed from the bike. By purchasing an extra bracket, you may easily switch the child bike seat between two bikes.Wear a helmet!All Hamax child bike seats are designed to ‘grow’ with the child via an adjustable safety harness and footrests. Hamax recommends that a child should always wear a helmet when using a child bike seat.FeaturesErgonomic sitting position,3-point safety harness with extra chest bracket in order to secure the child in the seat in a safe and practical manner,The belt buckles cannot be opened by the child itself,Safe and simple to fit,May be fitted to bikes with or without luggage carriers,For children above the age of 9 months and weighing up to 22 kg,Adjustable safety harness and legrests,The child bike seat may be easily attached to and removed from the bike,A suspended fastening bracket ensures excellent cushioning,Fits frame tubes from 28-40 mm (round),The fastening system will not get caught up with cables in the fastening area,Approved: TÜV/GS EN14344 Approved ,Dimensions: 48x39x71 cm/4.3 kg,Material: Polypropylene (PP), UV stabilised material.
Extra bar for adjustmentDo you need to adjust the seat? It is possible to increase incline, reduce incline, lower the seat or adjustment for small frames with an extra bar. Available for Kiss, Sleepy, Smiley, Caress, Siesta and Zenith.
Front-mounted child bike seat.Be close to your child on the first bike trips The Caress Observer, a front mounted seat, allows you to take your youngest child biking in a safe and comfortable way from an early age. FeaturesFor children from 9 months to 15 kg,Wind screen for protection against wind, rain and insects when bicycling (accessory),One-hand operation of harness and foot rests,Compact - giving enough space for the parent to cycle and step down between the saddle and the front seat,Design in line with the Caress rear mounted seat,An innovative bracket ensures easy attachment/removing of seat and wind screen,Approvals: TÜV/GS, EN14344,Dimensions: 66 x 29,5 x 15 cm / 1,6 kg,Material: Polypropylen (PP).
Extra bar for adjustmentDo you need to adjust the seat? It is possible to increase incline, reduce incline, lower the seat or adjustment for small frames with an extra bar. Available for Kiss, Sleepy, Smiley, Caress, Siesta and Zenith.