Engineered for maximum stopping power, these brake pads feature SwissStop's Disc E compound. This means that you'll benefit from its consistent braking performance and low weight. Combining an extremely high endurance pad compound with an organic formula, these brake pads give you long lasting braking performance with low noise. Compatibility: SRAM Red eTap AXS (Gen. 1 'Mono-Bloc' caliper),eTap HRD,Red 22 HRD (B1) Force Force 22 HRD (B1),Force 1 HRD Rival Rival 22 HRD (B1),Rival 1 HRD Apex Apex 1 HRD S-700 HRD (B1) Level Ultimate,TLM (2016-2019) Technologies: Disc E Compound: Long lasting, high endurance pad compound Very easy modulation of braking force High temperature stability for consistent brake power Organic formula is low noise and rotor friendly ATTENTION: PADS MUST BE BEDDED IN TO ACHIEVE OPTIMAL PERFORMANCE Step 1. On a gradual downhill slope, drag each brake for 20-30 seconds, alternating between front and rear. Repeat 2-3 times. Step 2. On a steeper slope, engage and drag the brakes for 10-15 seconds then increase lever pressure until the bike slows almost to a complete stop. Repeat 2-3 times. Pro Tip: The front pads will have been heated more than the rear. To achieve optimal performance, exchange the front and rear pads then repeat Step 2. CAUTION before replacing or exchanging brake pads it is essential to let all parts cool.
SwissStop Catalyst disc rotors deliver consistent brake torque over long durations where others experience gradual decline and brake fade.Optimum heat dissipation for maximum braking endurance and shortest stopping distancesReliable performance from cyclocross to downhill with high durability, even in he toughest conditionsLightweight 7075-T6 aluminium spider with highly efficient SUS410 stainless steel brake trackUCI approved for use in road competition6 bolt fitmentDue to extremely efficient thermal management, Catalyst provides notably shorter stopping distances with very low wear rates under hard braking, exceeding the current industry leaders.
SwissStop Catalyst disc rotors deliver consistent brake torque over long durations where others experience gradual decline and brake fade.Optimum heat dissipation for maximum braking endurance and shortest stopping distancesReliable performance from cyclocross to downhill with high durability, even in he toughest conditionsLightweight 7075-T6 aluminium spider with highly efficient SUS410 stainless steel brake trackUCI approved for use in road competition6 bolt fitmentDue to extremely efficient thermal management, Catalyst provides notably shorter stopping distances with very low wear rates under hard braking, exceeding the current industry leaders.
Swissstop have long been the top choice for riders with rim brakes and are now the top choice for disc-equipped bikes too. The ExoTherm 2 Disc Brake Pads are designed to massively reduce heat build up, improving all aspects of braking performance in harsh braking conditions.Cooling fins massively reduce heat build up, providing better performance for longerPad compound provides excellent braking performance, feel and durabilityProvides excellent brake modulation - ideal for loose and steep conditionsSupplied for high quality springs for excellent pad retractionSupplied as pairs for one wheelBased on Swissstop's class leading organic pad compound, the ExoTherm 2 pads are the number one choice if your regularly cook your brakes. By massively reducing heat build up, your brakes will perform The pad compound is formulated to provide excellent power while also giving superb modulation and durability. The pad compound offers quiet operation and low rotor wear. If you give your brakes a hard time, you need to check out the Swissstop RS Disc Brake Pads!
SwissStop Catalyst disc rotors deliver consistent brake torque over long durations where others experience gradual decline and brake fade.Optimum heat dissipation for maximum braking endurance and shortest stopping distancesReliable performance from cyclocross to downhill with high durability, even in he toughest conditionsLightweight 7075-T6 aluminium spider with highly efficient SUS410 stainless steel brake trackUCI approved for use in road competitionCentrelock fitmentDue to extremely efficient thermal management, Catalyst provides notably shorter stopping distances with very low wear rates under hard braking, exceeding the current industry leaders.
SwissStop Catalyst disc rotors deliver consistent brake torque over long durations where others experience gradual decline and brake fade.Optimum heat dissipation for maximum braking endurance and shortest stopping distancesReliable performance from cyclocross to downhill with high durability, even in he toughest conditionsLightweight 7075-T6 aluminium spider with highly efficient SUS410 stainless steel brake trackUCI approved for use in road competitionCentrelock fitmentDue to extremely efficient thermal management, Catalyst provides notably shorter stopping distances with very low wear rates under hard braking, exceeding the current industry leaders.
Swissstop have long been the top choice for riders with rim brakes and are now the top choice for disc-equipped bikes too. The RS Disc Brake Pads are tweaked to offer race ready performance, with a perfect balance of power, feel and durability.RS pad compound provides excellent braking performance, feel and durabilityProvides excellent brake modulation - ideal for loose and steep conditionsSupplied for high quality springs for excellent pad retractionSupplied as pairs for one wheelBased on Swissstop's class leading organic pad compound, the RS pads have been tweaked to offer race ready performance and improved feel. The pad compound is formulated to provide excellent power while also giving superb modulation and durability. The pad compound offers quiet operation and low rotor wear. If you give your brakes a hard time, you need to check out the Swissstop RS Disc Brake Pads!
Whether you're attacking your local trails at the weekend or exploring new routes through the mountains with your riding buddies, this MTB stem is engineered for securely holding your steering setup together, whatever the conditions. It features a high-quality alloy construction, which allows it to deliver a rock-solid connection between your handlebar and your fork's steerer tube. Syncros has also equipped this version with an anodised finish for an extra level of protection against corrosion, making it ideal for all weather and trail conditions. Suitable for handlebars with a 31.8mm bar clamp diameter and forks with a 1 1/8" steerer diameter, this is a perfect choice of upgrade for a solid hold as you carve your way around the mountain. Manufacturer's Part Numbers: 91360060012 Black/White 100mm 91360060013 Black/White 90mm 91360060014 Black/White 80mm 91360060015 Black/White 70mm
This mountain bike (MTB) stem is specifically designed for the rigours of modern trail riding and all mountain exploring. It comes equipped with a hard-wearing 6061 alloy build to ensure a strong and secure connection between your handlebar and your fork's steerer tube. Suitable for use on handlebars with a 31.8mm bar clamp diameter and forks with a 1 1/8" steerer diameter, this is a great choice of upgrade for holding your steering set-up together as you conquer your way around the mountain. Manufacturer's Part Numbers: 91360060002 Black/White 110mm 7 Degrees 91360060004 Black/White 80mm 12 Degrees 91360060006 Black/White 110mm 12 Degrees
All set for the next trail adventure, this MTB stem features a high-grade alloy build to achieve the perfect balance of strength, stiffness and weight. Syncros has also put this model through a sandblasting process for extra protection against wear as well as an anodising finishing process for corrosion resistance. This allows it to deliver a strong and secure connection for your steering setup in all weather conditions. Compatible with handlebars that feature a 31.8mm bar clamp diameter and forks with a 1 1/8" steerer diameter, it's engineered to ensure a dependable hold as you tackle the more demanding of terrain conditions. Manufacturer's Part Numbers: 91360060021 Black/Grey 130mm 91360060022 Black/Grey 120mm 91360060023 Black/Black 80mm 91360060024 Black/Black 70mm
The Syncros Alloy Comp 3.0 Bottle Cage is simple and efficient, a classic in cycling. The cage is particularly suited to off road cycling thanks to its secure grip on the bottle but can be used in any type of cycling.2 positioning levels to suit a variety of frame sizes and geometriesLightweight at only 60g (approx.)Constructed from aluminium the cage is lightweight, tough and durable, ensuring the bottle stays secure even over rough ground whilst remaining suitably light for racing use.
The Syncros Alloy Comp 3.0 Bottle Cage is simple and efficient, a classic in cycling. The cage is particularly suited to off road cycling thanks to its secure grip on the bottle but can be used in any type of cycling.2 positioning levels to suit a variety of frame sizes and geometriesLightweight at only 60g (approx.)Constructed from aluminium the cage is lightweight, tough and durable, ensuring the bottle stays secure even over rough ground whilst remaining suitably light for racing use.