Lighter wheels just feel better, period. Cube's 700C Road Inner Tubes weigh less than standard but perform just as well, offering excellent puncture protection. Keep your wheels rolling the way they were designed to. Supplied with 40mm Presta valves.
Take your running comfort to new heights with the Under Armour Seamless Stride Short Sleeve Running Top. Cut in a streamlined fit from soft knit fabric and a nearly sew-free design to eliminate chafing and keep you focused on your stride. Engineered mesh ventilation keeps the air moving in all the right places and anti-odour technology keeps you fresh. Finally, reflective details keep you visible when training in low-lighting conditions. Care Instructions Machine wash cold with like colours. Do not bleach. Tumble dry low. Do not iron. Do not use softeners. Do not dry clean.
Shimano MW702 XC Winter BootsWhen weather conditions turn cooler and wetter, the Shimano MW702 XC Winter Boots, with their GORE-TEX® waterproof membrane, will keep you shredding mountain bike trails in comfort while others stay indoors. There’s little worse than having cold and wet feet during a mountain bike ride. But with a waterproof Gore-Tex membrane, complete with Gore’s waterproof guarantee, the MW702 XC Winter Boots ensure your feet remain drier and warmer when venturing out into the wilds. Shimano also gives the boots a neoprene ankle closure, offering a flexible weatherproof seal just below your calf.The synthetic leather upper is also highly durable and features toe and heel reinforced zones to protect against the inevitable wear and tear of winter mountain biking.BOA® L6 Dial ClosureIn order to ensure a secure fit and all-weather cycling comfort, the 702s make use of a single BOA® L6 dial covered by a weatherproof wrap-over cover. Micro adjustment of the fit is made quick and easy via a turn of the dial. Whether tightening up for a harder effort or loosening to boost comfort as you wind down, you can get the fit just right to suit your needs. And at the end of a ride, simply pull up the dial for a quick release of the laces – simple even with colder hands.Cross Country SoleWhether on or off the bike, the XC sole unit performs brilliantly. When you’re pushing on the pedals, with a rating of 7 out of 12 for stiffness, it offers efficient power transfer. And should the terrain call for some time hike-a-biking then the ULTREAD™ compound provides a tenacious degree of grip over any terrain.Features:GORE-TEX® waterproof membraneTall neoprene ankle for additional protectionSynthetic leather upper with micro-perforationBOA® L6 closure & cover for added insulation and protectionXC sole with ULTREAD™ compound360-degree reflectivityWeight: 430gStiffness rating: 7/122-bolt cleat compatible (cleats not supplied)Buy Shimano Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Capacity: 0.8 litre
dhb Blok Sock - FlowMade from antibacterial Meryl Skinlife yarn, the dhb Blok Socks are brilliantly breathable and cooly comfortable for warm days on your bike. Add a dash of colour and match from head to toe with the Blok Sock - Flow.A practical addition to your warm season cycling wardrobe, the dhb Blok Cycle Socks feature a multi-panel construction: A reinforced heel and seamless reinforced toe box for extra durability and an air mesh at the top of the sock and cuff for enhanced breathability.The Blok Cycle sock has been constructed from a Meryl Skinlife yarn, which is ideal for its antibacterial and wicking properties. Designed to keep your feet cool and comfortable on any ride, the tall cuff height means there’s plenty of the vibrant Blok design on show to complement yourFeatures:Materials: 80% Polyester, 20% ElastaneItalian madeMeryl Skinlife yarn used for antibacterial effect, plus enhanced softnessAir mesh top of sock for enhanced breathabilityReinforced heel for extra durabilitySeamless reinforced toe boxBuy dhb Clothing from Chain Reaction Cycles. The World's Largest Online Bike Store.
TA only make their chainrings from the best 7075 T6 heat treated aluminium sheet. The teeth are cut in the traditional manner on a lathe which produces a much better and more accurate tooth form than pressing which is used by most chainring manufacturers.
The Lazer Impala helmet is at home anywhere. Designed as a lightweight trail helmet it combines ventilation, looks, safety and adjustability in an attractive package.Fit System - Advanced Turnfit SystemConstruction - In-mouldSizes - S M LFeatures an adjustable VisorGoggle ParkingOptional ATS LED LightAction Camera MountThe large visor is adjustable to allow goggle parking on the helmet while the rear shell shape provides support for your goggle strap. The bottom shell construction provides a clean finish and adds to the strength of the helmet. To keep you cool the helmet uses a combination of internal channelling, brow, top and rear exhaust vents to create airflow in the helmet. An open front and side construction also allow the use of goggles or normal eyewear when riding. To capture all your epic riding moments the Impala has a custom-built action camera mounting system that can be attached on top of the helmet without using sticky pads.Size Chart:
Engineered in a super-lightweight fabric, this jacket packs down remarkably small ready to stow away when it's not required. A dropped tail and shaped cuffs maximise your protection from the elements, reflective logos and darts on the sleeves improve visibility, while a brushed collar adds superior comfort. A performance-fitting jacket, it is made from a premium 2.5-layer fabric that produces very little rustle and has plenty of stretch to ensure there are no unwanted distractions as you pedal. Meanwhile, rear vents boost airflow and breathability when you're pushing the pace. dhb's Aeron collection dhb's most extensive range of performance products, Aeron is engineered with the best technical fabrics to keep you at optimal body temperature in all conditions. Built to last, dhb rigorously test every garment out in the field, fine-tuning until they are ready to go. Minimal distractions, maximal comfort.
Micro Synthetic Down GiletFrom reaching new peaks to everyday adventures, the Micro Synthetic Down Gilet from Föhn is the perfect packable layer for your next trip. With premium recycled insulation from industry leaders PrimaLoft® to keep you warm and protected.If you’re looking for a versatile gilet that works as a technical mid-layer but is just as good as a warm everyday outer-layer, the Föhn Micro Synthetic Down Gilet does it all. It’s so light and packable and resistant to the elements, there’s no reason to not throw it in your rucksack.PrimaLoft® Insulation ThermoPlume®: Changing the world, one gilet at a time Föhn has partnered with world-leading insulation specialists, PrimaLoft® to make high-performance outdoor clothing without impacting the environment.PrimaLoft® Insulation ThermoPlume® is a 100% post-consumer insulation comprised of small, silky plumes of fibre that mimic the lightweight warmth, softness and compressibility of natural goose down. Made from 100% post-consumer recycled (PCN) polyester, this all-synthetic package features down comparable-performance insulating loft, wet weather protection and compressibility.Backed by a history of sustainably conscious innovations, industry leadership for PrimaLoft® includes a Relentlessly Responsible™ commitment to pushing both performance and sustainability forward. They make performance-driven insulation fibres from plastic water bottles, and PrimaLoft® has saved more than 339 million plastic water bottles from landfills and oceans since 2007. PackabilityConstructed with micro baffles for a slim profile that makes it perfect for layering, this gilet is super packable, folding into the internal pocket. Both shell and gilet lining are made from 100% Recycled Nylon, which is wind resistant and synthetic down proof with a durable water-repellant (DWR) treatment. Fully FeaturedTwo zipped hand pockets, lined with brushed fabric to add warmth and comfort. An adjustable lower hem is there to let you lock in as much warmth as possible, and a YKK zip with a silicone-grippy puller is easy to open and release heat even with gloves on.Features:Materials: Front and back: 100% Nylon; Insulation: 100% PolyesterPowered by PrimaLoft® ThermoPlume® 100% recycled bluesign® approved insulationLightweight and packableWater-resistant ripstop outer fabricIdeal for layering in cold conditions or as an outer layerYKK zip with insulated zip guardTwo zipped hand pocketsZipped internal pocket doubles as packaway pouchAdjustable hem with ergonomic glove friendly toggle adjustersAll Föhn gilets use fully synthetic materials, and this gilet is made with 100% Recycled Polyamide and 100% Post Consumer Recycled PolyesterWeight: 374g (Medium) approx.Buy Föhn outdoor clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Our Standard Presta Valve Tubes feature a moulded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.Individually cured for consistent tube thickness = the utmost in quality.
A brilliant performance! The SKS Bluemels mudguard set can not only be perfectly integrated onto the bike but also reliably protects against dirt and spray water. Thanks to the flexible sandwich construction, in which ultra-fine aluminium strips are embedded in a plastic coating, the mudguards are extremely robust, rigid and corrosion resistant.Wheel size , 20"- 29"Tyre widths: 35mm, 45mm, 53mm, 55mm, 60mm, 65mm,69mmColour: Black & SilverMaterial , plastic27.5"-29" 65mm27.5"-29" 69mmSandwich construction made of aluminium/plasticV-stays with fixed bridges for flexible adjustmentASR safety systemBottom bracket cut outsWith its shiny black surface and black fastening components, the Bluemels also leaves nothing to be desired in terms of appearance. The ASR safety system uncouples the stays should branches become trapped between the spokes, so the wheel is unable to jam. The V-stays with fixed bridges guarantee individual adjustment. The bottom bracket cut outs make mounting possible even when installation clearance is small. Includes accessories and stays.
The Hope Technology RD40 RS4 Rear Wheel is a lightweight and stiff Road/Cyclocross wheel built onto Hope s RS4 Straight Pull 6 bolt disc hub. With a lightweight, mid-section disc-specific carbon rim, the RD40 is perfect for fast road, gravel and cyclocross use.Lightweight tubeless ready 40mm deep carbon rim is disc specific19mm ID rim is ideal for wider tyresHighly durable straight pull RS4 hubs with Sapim CX-Ray bladed spokes and reduced drag 2-pawl freehubSupplied with QR and 142x12mm hub end caps6 bolt rotor fittingThe 40mm deep carbon disc specific rims are tubeless compatible when fitted with the supplied tape and valves, making tubeless conversion easy. The 40mm deep profile combined with bladed Sapim CX-Ray spokes provides excellent aerodynamic performance, while the rims 19mm ID rim bed is ideally suited to the latest bread of wider road, cyclocross and gravel tyres. The wheels can be adapted quickly and easily to suit different frame fittings and comes supplied with QR and 142x12mm end caps. All the wheels are machine built and hand finished in Barnoldswick.The RS4 Straight Pull Hub is the perfect combination of light weight and durability. Machined from forged 2014 T6 aluminium billet and with Hope s bullet proof sealed stainless steel cartridge bearings, this hub has unsurpassed reliability. The hub uses a two pawl ratchet mechanism creating a drive with significantly less drag and as a result, a quieter freehub. Combined with the RD40 rim, you have the perfect all-round road, gravel and cyclocross wheelset.