New Aluminium 6061 T6 handlebar with shallow PPA drops and ergonomic top. Suitable for those cyclists who enjoy a more comfortable high position but also for those who ride more aggressively grabbing the drops.Width : 40-42-44cm CC,Bulge: 31,8mm,Material: 6061 T6 double butted Aluminium alloy,Finishing: Matt black anodized / Painted White,Weight: 330g (42cm),.
As you might have worked out by now, headsets are a bit of a minefield! Integrated, integral, reducers, dimensions and types all contribute to confusing the situation. Don’t panic! We have now made top and bottom cups available separately allowing our headsets to fit almost any frame and fork combination. Hopefully this brochure will help you through choosing the right headset for your bike.A couple of things to remember though - we don’t necessarily do a headset to fit your bike! We have 4 ‘off the shelf’ combinations and a further 18 ‘Pick n Mix’ options. There are other styles, types and fittings out there. The first thing to remember is that you need accurate dimensions if you are at all unsure of what type you need.The second point to remember is that unfortunately there is no ‘standard’ - OK, we have the dimension 1 1/8 inch, which covers the majority of headsets now, but as far as Integral, integrated etc... these are simply terms used by different manufacturers to determine what they consider that style to be. Measure, check and measure again!One thing that is common throughout our range is the quality of materials used to manufacture them, here in our Barnoldswick Factory, the quality of the custom made stainless steel bearings and the time taken to hand assemble each and every one before it leaves, on it’s way to you!Our traditional headset is made to fit standard frames and 1 1/8 inch fork steerers. They include custom made stainless steel bearings (which are replaceable). The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The integral headset is made to fit low stack 1 1/8 inch frames (please check drawings for exact sizing). They include custom made stainless steel bearings (which are replaceable). The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The integrated headset is made to fit in 1 1/8 inch frames where the bearings fit directly into the frame. They include custom made stainless steel bearings (which are replaceable). The taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The tapered headset is designed to fit frames which are sized to accept integral 1 1/8 inch top cup and 1.5 inch integral bottom cups, where the fork steerer has a 1.5 crown and a 1 1/8 inch top. It is also possible to fit a standard 1 1/8 inch steerer using an additional conversion crown. The headsets include custom made stainless steel bearings (which are replaceable).The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium. All off the shelf headsets come complete with the Hed Doctor. Sealing is achieved through an adjustable taper ring cover and integrated rubber seal.The bearings also incorporate their own sealing, and being made from stainless steel to resist corrosion - a real advantage over a conventional steel bearing.
As you might have worked out by now, headsets are a bit of a minefield! Integrated, integral, reducers, dimensions and types all contribute to confusing the situation. Don’t panic! We have now made top and bottom cups available separately allowing our headsets to fit almost any frame and fork combination. Hopefully this brochure will help you through choosing the right headset for your bike.A couple of things to remember though - we don’t necessarily do a headset to fit your bike! We have 4 ‘off the shelf’ combinations and a further 18 ‘Pick n Mix’ options. There are other styles, types and fittings out there. The first thing to remember is that you need accurate dimensions if you are at all unsure of what type you need.The second point to remember is that unfortunately there is no ‘standard’ - OK, we have the dimension 1 1/8 inch, which covers the majority of headsets now, but as far as Integral, integrated etc... these are simply terms used by different manufacturers to determine what they consider that style to be. Measure, check and measure again!One thing that is common throughout our range is the quality of materials used to manufacture them, here in our Barnoldswick Factory, the quality of the custom made stainless steel bearings and the time taken to hand assemble each and every one before it leaves, on it’s way to you!Our traditional headset is made to fit standard frames and 1 1/8 inch fork steerers. They include custom made stainless steel bearings (which are replaceable). The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The integral headset is made to fit low stack 1 1/8 inch frames (please check drawings for exact sizing). They include custom made stainless steel bearings (which are replaceable). The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The integrated headset is made to fit in 1 1/8 inch frames where the bearings fit directly into the frame. They include custom made stainless steel bearings (which are replaceable). The taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium.The tapered headset is designed to fit frames which are sized to accept integral 1 1/8 inch top cup and 1.5 inch integral bottom cups, where the fork steerer has a 1.5 crown and a 1 1/8 inch top. It is also possible to fit a standard 1 1/8 inch steerer using an additional conversion crown. The headsets include custom made stainless steel bearings (which are replaceable).The cups, taper ring and crown race (which is split for easy installation and removal) are all machined from 2014 T6 aluminium. All off the shelf headsets come complete with the Hed Doctor. Sealing is achieved through an adjustable taper ring cover and integrated rubber seal.The bearings also incorporate their own sealing, and being made from stainless steel to resist corrosion - a real advantage over a conventional steel bearing.
The OnGuard combo pack offers the convenience and security of the BullDog Combo STD with included 4 foot fully coated, braided steel cable for more locking options and added security with piece of mind when leaving your bike locked up.OnGuard’s bestselling U-locks featuring best-in-class X2P Double Bolt lock mechanisms and super strong 13mm (0.51”) hardened steel shackles for a full circle of protection.Shackle dimensions: 115mm x 230mm x 13mm (W x H x Diam)Cable dimensions: 120cm x 10mmKey Features:X2P Double Bolt Locking Mechanism locks shackle on both sides,NEW Z-Cylinder is bump-proof and resists picking, pulling or drilling,Hefty 13mm (0.51”) hardened steel shackle resists cutting, prying and jacking,Rounded design and centred keyway eliminates pry points,Double rubber coated crossbar cover protects paint and finishes,Extra thick moulded end caps protects against bumps and hits.
Features :High performance mineral oil brake fluid designed specifically for mountain bike disc brakesThe formula created gives maximum fluid life to ensure the best braking performance is maintained for as long as possibleUltra low-viscosity oil gives excellent operation even in the most extreme riding conditionsFinish Line mineral fluid is a mixture of alkanes and saturated hydrocarbons and has a number of benefits, these include hydrolytic stability (ie the fluid is water tolerant), great corrosion control, being friendly to most materials, and having high viscosity leading to no leakageWhatever the weather, brakes filled with Finish Line brake fluid will stop you on a dime.,
Tape, plugs and end tape included.Time to replace your bar tape? This super-tacky, high perfomance bar tape offers improved grip for maximum control and comes in a selection of colours.Key FeaturesSuper-tacky finish for improved grip and maximum control,2mm comfort cushioning,Available in 2mm and new 3mm thickness which is perfect for gravel bikes,Handlebar end-plugs and finishing tape included.
Key Features:12" in length,Chrome finish,Easy to fit.
Truvativ BMX, American-Euro style bottom bracket adaptor. This bushing set allows you to mount a modern threaded cartridge bottom bracket unit, into a frame made for the old-style "Ashtabula" (one-piece) cranks. This saves you weight, improves shifting and allows the use of modern clipless pedals.
Compact Compression fit pack away elbow protection with removable sections.Features: Removable foams and knee cap for washing,Low weight, high strength flexible 1mm cap for superior fit and arm movement,Double layer custom foam to increase air flow and reduce weight,Compression fit, designed to be packable for out on the trail,A combination of Poly/Spandex and 4 way stretch mesh give great fit and ventilation,Designed beyond CE EN 1621/1 standard to ensure maximum protection,Sizes - S/M/L/XL.
The Ardent Race tyre from Maxxis is ideally suited for technical XC race courses and endurance-length events. With its medium-height tread, the Ardent Race bridges the gap between the XC-oriented Ikon and the trail-oriented Ardent. The center knobs are ramped to reduce rolling resistance, and the side knobs are angled and stepped to give great biting traction in corners. Choose the Ardent Race for your next demanding XC race or epic trail ride.SpecificationConditions: Hardpack, Loose Over Hard, Medium,Cornering Control: 1 2 3 4,Rolling Efficiency: 1 2 3 4,Compound: 3C MaxxSpeed Compound Technology,Breaker: EXO Puncture Protection,Max PSI: 60,Bead Type: Folding,Tubeless Tyre,TPI: 120,Weight: 705g,.Technology3C Maxx Speed: Used primarily in cross country and enduro tyres, the two compounds in the outer layer are specially formulated to reduce rolling resistance and optimize treadwear and traction.Tubeless Ready: Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Maxxis Tubeless Ready (TR) tyres provide the benefits of a UST tubeless tyre without the weight penalty. Our TR tyres use a standard casing and require the use of a liquid sealant in order to make them airtight.EXO: An extremely cut-resistant and abrasion-resistant material added to the sidewalls of select mountain tyres. This densely woven fabric is also lightweight and highly flexible, ensuring that the performance of the tyre remains unaffected. Choose EXO Protection for exceptionally rocky, treacherous trails where the chance of sidewall cuts and abrasions is high.
Key Features:Steel Construction,Fits 22.2mm Handlebar.