Assos EQUIPE RS Targa Cycling Rain JacketThe ultralight Assos EQUIPE RS Targa Cycling Rain Jacket is now on its third iteration, with improvements to performance and durability, making it a wet-weather essential when training and racing. The outstanding wet-weather performance and lack of bulk of the EQUIPE RS Targa Cycling Rain Jacket is made possible by its combination of 3-layer Schloss Tex material and a durable breathable membrane. Schloss Tex is Assos' lightest waterproof textile, and it's also rustle-free and with slight stretch to give you a jacket with a performance fit. You'll also find full-taped seams prevent the slow ingress of water during prolonged bouts of rain. Thanks to the high degree of breathability, riding into a tough headwind or powering up steep climbs won't leave you soaking in sweat either. Compared to previous versions, this Targa jacket does away with the rear pocket slots. This removes an area of water ingress while also removing excess bulk too. With the two-way full-length front zipper you can unzip from the bottom, both as a means to access rear jersey pockets while also allowing easier control of ventilation and temperature regulation. A stitchless rear reflective strip also removes an area of water ingress while keeping you visible when daylight fades. A tall collar keeps the elements off at the neck and an extended rear lower panel fends off tyre spray at the back. The body-hugging Assos raceFit also ensures you're not wasting precious energy in battling a loose and flappy jacket. Easy to pack in a jersey pocket, the EQUIPE RS Targa Cycling Rain Jacket is now better than ever. Ideal for race day or training sessions, it slips over your cycling kit to fend off wind and rain while not weighing you down when not needed. Features:Materials: 73% Polyamide, 27% Elastane3-layer Schloss Tex waterproof materialHighly breathable membraneDouble-Slider Zipper - Ventilate from the top or bottom with easeRobust zip construction with oversized pull tabs for intuitive, glove-friendly operationFully taped seamsReflective strip bonded to the rear boosts visibility in low-light and extreme weatherconditionsAerodynamic raceFitBuy Assos Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Keep drag at bay as you tear through the water with an extraordinary amount of speed whilst wearing the Speedo Fastskin LZR Pure Intent Jammer. The ergonomic seam placements put them in the perfect position to prevent them both slowing you down and rubbing against the skin across longer swims, the former enhanced by textured fabric zones in all the right places. Elsewhere, every single kick counts more than ever before thanks to new band technology, with a greater range of movement thanks to the triple fabric construction, while light compression in all the right places help to keep fatigue at bay without causing discomfort. Finally, the jammers come with full approval from FINA (International Swimming Federation), so they’re perfect for competition.
It's All About the Speed The Cerebel is a compact aero road helmet, designed and engineered to improve aerodynamic performance. The Cerebel helmet was developed in close collaboration with Garmin-Sharp Pro Cycling team (now Cannondale-Garmin), Volvo Car Group and POC's own aerodynamic specialist at the POC WATTS Lab with the aim of creating the most aerodynamic helmet possible, in a wide variety of riding positions. Through the use of wind tunnel testing and Computer Fluid Dynamic (CFD) simulations POC were able to determine that the Cerebel excels in dynamic and varying body positions, which in turn benefits upper body movement and overall lactate clearing efficiency compared to a static TT position. The rear of the Cerebel is made of soft moulded EVA(ethylene-vinyl acetate copolymer foam) covered in aerodynamic fabric further reducing drag and enhancing comfort. Clear Vision at speed you need ultra-clear vision and so POC chose to use a visor developed with Zeiss, leading optics specialists, in order to achieve absolute clarity as you ride.The visor tint has been specifically developed together with Zeiss to enhance the contrast of the road surface, allowing you to spot any irregularities or obstacles in time. The Visor is held firmly in place through the use of a magnetic system, making attachment and removal extremely simple while also keeping the lens perfectly positioned for low drag. RACEDAY performance Following the AVIP concept, which promotes safety for road cyclists, POC now introduces Raceday. Raceday is built on the experiences of the AVIP range and has been further developed to optimise and enhance performance when racing, to give competitive cyclists the most optimal equipment in their quest to win. Raceday is built on the competence of POC’s product development team and developed in close collaboration with Garmin-Sharp Pro Cycling Team, Volvo Car Group and the aerodynamic specialists in WATTS Lab. WATTS Lab is POC’s highly specialised department, whose objective is to optimise performance and aerodynamics of POC products. Through computer simulations and extensive wind tunnel testing together with the aerodynamic specialists in WATTS Lab, POC have studied the specific challenges in road cycling performance and importantly not only what to focus on, but also where to focus in order to improve aerodynamic efficiency. Raceday is the result of POC’s uncompromising approach to road cycling performance and marks the next step in their quest to redefine the future of road cycling. Sizes Small (50-56 cm), Medium (54-60 cm) - To obtain and ensure that you purchase the correct helmet size, measure around the head just above the ears and level front to back.
The Bont Helix sets a new benchmark for high-performance road cycling shoes. With a 100% carbon sole, heat moldable fit and a weight of less than 520g per pair, the Helix is ready for long days in the saddle and races alike.100% carbon sole is designed for maximum performance at a class leading weightPerforated upper is light and durable, while air vents improve breathabilitySingle BOA IP1 retention system allows for easy, consistent adjustmentFully heat moldable chassis allows you to get the perfect fitIncredibly lightweight at just 520g per pairFrom the outset, Bont designed the Helix to be one of the best road-cycling shoes you can buy. The Helix doesn't skimp on features, and uses a 100% carbon sole with a slim 3.6mm stack height and excellent stiffness to offer maximum performance. The carbon sole also helps keep weight down to just 520g per pair.Any set of cycling shoes is likely to see a lot of abuse and needs to perform to a high-level, so Bont has utilised a light and breathable but tough perforated upper that is incredibly durable and built to last. Air vents on the front bumper help to improve breathability, so even in the height of summer, you won't struggle with hot feet.Fit on any cycle shoe is important, and Bont have equipped the Helix with a fully heat moldable chassis so you can ensure you have the perfect personalised fit just for you. With the fit sorted you'll want to make sure the shoes stay put and thanks to the use of a BOA IP1 retention system you can be sure the Helix is going nowhere, even under hard, out of the saddle sprints. Light, stiff, comfortable with a customised fit, the Bont Helix is perfect for riders who the very best in performance.Size Chart:
The Bont Helix sets a new benchmark for high-performance road cycling shoes. With a 100% carbon sole, heat moldable fit and a weight of less than 520g per pair, the Helix is ready for long days in the saddle and races alike.100% carbon sole is designed for maximum performance at a class leading weightPerforated upper is light and durable, while air vents improve breathabilitySingle BOA IP1 retention system allows for easy, consistent adjustmentFully heat moldable chassis allows you to get the perfect fitIncredibly lightweight at just 520g per pairFrom the outset, Bont designed the Helix to be one of the best road-cycling shoes you can buy. The Helix doesn't skimp on features, and uses a 100% carbon sole with a slim 3.6mm stack height and excellent stiffness to offer maximum performance. The carbon sole also helps keep weight down to just 520g per pair.Any set of cycling shoes is likely to see a lot of abuse and needs to perform to a high-level, so Bont has utilised a light and breathable but tough perforated upper that is incredibly durable and built to last. Air vents on the front bumper help to improve breathability, so even in the height of summer, you won't struggle with hot feet.Fit on any cycle shoe is important, and Bont have equipped the Helix with a fully heat moldable chassis so you can ensure you have the perfect personalised fit just for you. With the fit sorted you'll want to make sure the shoes stay put and thanks to the use of a BOA IP1 retention system you can be sure the Helix is going nowhere, even under hard, out of the saddle sprints. Light, stiff, comfortable with a customised fit, the Bont Helix is perfect for riders who the very best in performance.Size Chart:
Designed to cater for the ever-growing e-bike market, the Exposure Lights Flex e-Bike Front Light is perfect for thrashing your e-bike off-road at night. With up to 3300 lumens, the Flex has all the power you'll need.3x XPL2 Cree LEDs emit a massive 3300 lumens to light the trail ahead in incredible detailPowered by your e-Bikes batterySimple forged aluminium bracket for central mounting positionWired remote allows for easy changing of modes on the moveMade In The UK with 2 Year WarrantyIn The Box: Flex, E-Bike Handlebar Bracket, QS GuideThe 3 XPL2 Cree LEDs provide a massive 3300 lumens in the highest-power mode, illuminating the trail in incredible detail and making riding at night easier than ever before. The Reflex Technology tailors the amount of light depending on the terrain, becoming brighter when descending and dimmer when climbing. The wired remote make it easy to change modes on the go, while the forged aluminium bracket gives a central position for the light, allowing you to focus on the trail ahead. Lightweight, compact and extremely versatile, if you ride your e-Bike off road at night, you need the Exposure Lights Flex in your life! Includes: Flex e-Bike Front Light, Fixed handlebar bracket, Quick Start guide
Leatt DBX 5.5 Neck BraceThe DBX 5.5 was built with safety as well as comfort in mind and offers premium, high performance protection that is adjustable enough to fit all riders. Making use of Alternative Load Path Technology (ALPT), crash forces are directed from your helmet towards your body, bypassing your neck. The collarbone cut-out on the brace also keeps your helmet as well as the neck brace away from your more fragile bones when you crash whilst the rear thoracic strut’s dual plate design is designed to snap off before applying excessive pressure to the back. All Leatt neck braces are CE tested and certified as Personal Protective Equipment.Features: Chassis made of fibreglass reinforced polyamide 5.5/6.5 helmet rim striking platform design for a biomedical balanced head and helmet freedom of motion Three-way adjustability and sliding front and rear SureFit adjusters to ensure optimum fit Four-angle rear thoracic strut adjustments to fit most body shapes Sculptured, split front for improved comfort and fit CoreFlex split rear thoracic strut is more comfortable and designed to work with the body’s natural movements Thoracic rear strut is engineered to snap off before applying excessive pressure to the back Low profile push-button open/closure system Easy-to-use emergency release mechanism for injured riders Engineered collarbone cut-out to help keep your helmet and brace away from your most fragile bones Injected, durable and easy-to-clean foam padding Air flow ribbed body padding for optimum ventilation Folding rear thoracic strut for easier packing Free, optional, clear chest strap included CE tested and certified as Personal Protective Equipment 89/686/EEC Engineered and lab proven by a medical doctor and biomedical engineers Trusted by some of the fastest downhill racers in the worldUnisex fit Weight: from 790gBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Leatt DBX 5.5 Neck BraceThe DBX 5.5 was built with safety as well as comfort in mind and offers premium, high performance protection that is adjustable enough to fit all riders. Making use of Alternative Load Path Technology (ALPT), crash forces are directed from your helmet towards your body, bypassing your neck. The collarbone cut-out on the brace also keeps your helmet as well as the neck brace away from your more fragile bones when you crash whilst the rear thoracic strut’s dual plate design is designed to snap off before applying excessive pressure to the back. All Leatt neck braces are CE tested and certified as Personal Protective Equipment.Features: Chassis made of fibreglass reinforced polyamide 5.5/6.5 helmet rim striking platform design for a biomedical balanced head and helmet freedom of motion Three-way adjustability and sliding front and rear SureFit adjusters to ensure optimum fit Four-angle rear thoracic strut adjustments to fit most body shapes Sculptured, split front for improved comfort and fit CoreFlex split rear thoracic strut is more comfortable and designed to work with the body’s natural movements Thoracic rear strut is engineered to snap off before applying excessive pressure to the back Low profile push-button open/closure system Easy-to-use emergency release mechanism for injured riders Engineered collarbone cut-out to help keep your helmet and brace away from your most fragile bones Injected, durable and easy-to-clean foam padding Air flow ribbed body padding for optimum ventilation Folding rear thoracic strut for easier packing Free, optional, clear chest strap included CE tested and certified as Personal Protective Equipment 89/686/EEC Engineered and lab proven by a medical doctor and biomedical engineers Trusted by some of the fastest downhill racers in the worldUnisex fit Weight: from 790gBuy Leatt Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
The SRAM Force 1 crankset brings to cyclocross a game-changing upgrade in performance and reliability by combining the durability, simplicity, and efficiency of SRAM s Force 22 road combined with our MTB 1x technology, X-SYNC. The crankset features unidirectional carbon cranks arms which are matched to a forged alloy spider for lightweight and durability. The chainrings feature SRAM X-SYNC technology which provide the highest level of performance and durability. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC chain rings have been designed with mud-clearing recesses for the inner chain links and rollers. Bottom bracket not included.
This stunning model features a 14-tooth (upper) and 18-tooth (lower) pulley with a narrow-wide profile. Additionally, its unique narrow-wide tooth profile of the pulleys ensures durable chain retention It's fitted with a custom designed, strong carbon fibre pulley cage assembly for long durability and light weight. The cage design allows you to choose between two spring tension settings to customise performance and reduce chain drag. We recommend initial setup in the lower spring tension. This has been designed to leave the clutch mechanism fully functional for chain retention. Finally, thanks to the high-quality CeramicSpeed Bearings inside, your product will benefit from 3-5 times longer lifetime compared to stock. The OSPW X System for SRAM 1x has been tested to deliver 30-40% less friction than conventional systems. Compatibility: • SRAM Force 1X 11 speed with Type 3 clutch and cage lock position 8 o’clock. • SRAM Rival 1X 11 speed with Type 3 clutch and cage lock position 8 o’clock. NOT compatible with Apex 1 due to a difference in cage lock des
CeramicSpeed SRAM Type 3 1x11 Speed Clutch OSPWThis high-quality OPWS is specifically designed for use with your SRAM Rival or Force 1 type 3 derailleur for outstanding performance optimisation. This model wraps your chain around its 14T upper and 18T lower narrow-wide pulley wheels for reduced friction and watt savings starting at 2.4W, so you can enjoy increased speed and a more efficient drivetrain.Features: Material: Pulley Wheels: Aluminium; Cage: Carbon reinforced PA Compatibility: SRAM Rival or Force 1 Type 3 Pulley Wheels: 14T upper and 18T lower narrow-wide pulley wheels Cassette Compatibility: Fits cassettes up to 42-tooth Speed: 11 speed Use: Road, GravelBuy CeramicSpeed Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ultegra Shadow design with Di2 technology, shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gear The rear derailleur is now the brains of the system with wireless connectivity to the shifters. It acts as the point the system is charged, provides ANT+ connection to 3rd party devises and replaces the handlebar junction Button on the derailleur for Di2 operations, and LED light denotes synchronized shift mode, setting mode and charge requirements Sleek appearance with Low profile Shadow design construction reduces risk of damage in a crash Programmed automatic motion at the touch of a switch makes this derailleur quick, smooth and effortless to shift The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts Derailleur contains a saver (fuse) function, where the inner structure is protected from strong impacts High tolerance cold forged aluminium link plates and body construction is extremely light and durable Four self-lubricating micro-machined fluorine-coated link pivot bushings provide low-friction shifting 12-speed E-tube Di2 compatible Wide gear ratio compatible up to 11-34T