RockShox ZEB Ultimate Charger 2.1 RC2 ForksBuilt for Enduro performance, this MTB fork features 38mm aluminium upper tubes, magnesium lower legs and a forged, hollow aluminium crown for a perfect strength to weight ratio. RockShox has also kitted out this model with a highly-tuneable DebonAir air spring, which delivers an amazingly smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain. Coming trail-ready with RockShox's highest performing Charger technology, this model also uses its Charger 2.1 RC2 damper to give you independent high and low-speed compression with rebound adjustment. Designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail.- 38mm chassis for increased stiffness and rider confidence- Highly-tuneable DebonAir air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain- RockShox's highest performing Charger technology. Charger 2.1 RC2 damper features independent high and low-speed compression with rebound adjustment - designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail- Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel- Maxima Plush damping fluid reduces friction and silences damper noise- Short fender compatible (RockShox fender sold separately)Features: Upper Tube Material: 38mm Aluminium Crown Material: Forged, hollow AluminiumLower Leg Material: MagnesiumUse: MTB, EnduroSteerer: 1.5" taperedAxle: 15x110 BOOSTBrake Type: DiscSpring: DebonAir air springDamper: Charger 2.1 RC2Crown OD: 63mmMaxle Included: Maxle StealthWeight: 27.5": 2263; 29": 2298gBuy RockShox Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
X Fusion McQueen 34 HLR Boost ForksReady for fast and rebellious MTB rides, these stunning forks deliver awesome stiffness without adding any unnecessary weight to your ride. X-Fusion has kitted these out with an air spring which absorbs every sudden knock and jolt during your off-road pursuits. This means you can blast as hard as you want across the rock gardens, tree-roots and rowdy trails while maintaining your momentum. Adjustable MTB ForksWhether you're riding after work with your buddies or competing, these solid components provide maximum shock absorption on every daring run. Kitted out with a Roughcut HLR damper, you'll benefit from being able to easily adjust their high and low speed compression and rebound. This allows you to set them up to match your specific riding style and the terrain conditions for a more rider-tuned experience. Features:Material: AluminiumFinish: AnodisedUse: MTBOffset: 46mmAdjustments: High and low speed compression, rebound, air pressureDamper: Roughcut HLRSpring: AirTravel: 140mmAxle: 15x110mm, BoostWeight: 2.1kg (approx)Buy X Fusion Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
These MTB forks feature a 32mm straight wall aluminium upper tube construction, which makes them perfect for use on XC bikes where every gram counts towards your winning score. Coming equipped with magnesium lower legs and a forged, hollow aluminium crown, these are an ideal upgrade for riders who want superior durability without any excess weight. One final highlight is their external rebound and 2 position compression adjustment, which allows you to ride in either an open or locked position. This makes it great for riders who want a front suspension setup that can be fine-tuned to match their riding style and the terrain conditions. 32mm chassis focused on light weight for the classic XC bike. DebonAir™ air spring is tuned specific to meet the demands of XC and maintains a higher ride height for increased confidence and control. Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. Proven Charger RL damper provides smooth performance and a rock-solid lockout. Maxima Plush damping fluid reduces friction and silences damper noise. 29" wheel only. 100mm max travel.
Ready for downhill domination, this excellent Diamond D1 version features an aluminium main build and magnesium-cast lowers, giving a reliable and robust performance on every adventure. Giving you six clicks of low-speed compression adjustment and 24 high-speed changes, fine-tuning the fork for your impending route is made easy, while Off The Top (OTT) adjustment to the negative spring improves the small bump sensitivity and stroke feel. Shim stack-controlled damping and a closed cartridge bladder system allow you to customise how rowdy you like your run to be through the use of different configurations, making this stiff and supportive fork an impressive choice for the venturesome rider.
This model of the legendary Fox 36 receives an update in the form of a revised crown design that's engineered with more steerer tube overlap. This improves its durability and maintains stiffness while dropping 20 grams. Updated Crown Lighter by 20 grams, while increasing steerer-tube overlap at the CSU, the updated crown design improves durability while our engineering maintains stiffness and drops weight. Kabolt X Axle Kabolt X is a lightweight bolt-on floating axle to shave grams and increase torsional stiffness via a sleeveless, it features a single-sided pinch bolt design. Lower Leg Bypass Channels Increasing air volume within the lower legs reduces the amount of additional unintended pressure ramping. Lower leg bath oil also circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Bleeders Allows for atmospheric pressure equalization for better fork performance, allowing full travel to be achieved and increasing small bump sensitivity and responsiveness. Lower Leg Arch Our new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity-style riding. Grip2 Damper Unparalleled ride quality and ultra-precise adjustability. Allows for external fine-tuning of suspension performance thanks to our patented Variable Valve Control (VVC) technology. Float EVOL Air Spring Optimises small bump sensitivity by increasing negative air spring volume. Its linear spring curve delivers plushness off the top, extra mid-stroke support, and a more tunable bottom-out progression. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 are designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.
This versatile mountain bike (MTB) fork features a hard-wearing straight wall aluminium leg construction, which allows it to handle all of the intensity that's associated with training and competing. Coming equipped with an Expert Air spring, VTT compression damping and In-leg adjustable TPC rebound damping, this model allows riders to dial in their ideal riding preferences to match their style or the terrain conditions. Its adjustable air, rebound and three-position compression (Open, Trail and Lock), means that you'll enjoy a more rider-tuned feel with increased performance and reliability, as you tackle every off-road challenge that comes your way. Expert Air Spring This trail-ready model features the Manitou Expert Air spring system, which contains a unique balancing valve that equalises the positive and negative air chambers during the air fill process. This gives the spring rate a consistent feel without any flat or dead spots in the stroke, along with giving riders of different weights the same initial stroke feel. Variable Terrain Tune - 3-Position Compression Adjust When developing the VTT Pro damper, Manitou set out with a goal to maintain a rock-solid lockout without compromising the open and mid settings. The downside to many dampers with firm lockout modes is that in any other position than lock-out you will reach some critical shaft velocity that chokes off the low-speed flow path. When this happens the damper peaks at nearly the same lock-out force as the locked-out position. This translates to harsh force in the hands and possibly lack of control. The goal with VTT is to eliminate that high-speed spike while maintaining the lock-out force demanded by most XC users. This allows the fork to have a less progressive high-speed response while maintaining some low-speed support. This is achieved through independent shim stacks (one for Lockout, one for the other two positions). By controlling the shim stack through which the oil flow is diverted we can manipulate the characteristic of the damper to be Lock-out, Digressive, or progressive to meet the demands of the rider and terrain. Chassis When developing the chassis of this Manitou fork, the goal was to find the perfect balance of weight, stiffness, and reliability. Thanks to its Reverse Arch, Manitou is able to position the arch further away from the axle. The lower tyre clearance behind the fork relative to the centre of the axle allows for a shorter arch which yields 13% increased stiffness compared to a forward arch fork of the equivalent weight. Because of this, Manitou is able to use 32mm stanchions to save weight, while keeping stiffness closer to that of a larger stanchion fork with a forward-facing arch. Item Top Features Continued: Max Tyre Size: 68mm 77mm (27.5"+), 68mm (29") Offset: 37mm (27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") E-Pac: No Manufacturer's Part Numbers: 191-36972-A001 Black 27.5" x 100mm 37mm 191-36972-A002 Black 27.5" x 120mm 37mm 191-36976-A001 Black 27.5+/29" x 100mm 44mm 191-36976-A002 Black 27.5+/29" x 120mm 44mm
Whether you're competing in an event or exploring the woodland after work with your buddies, these fantastic forks are engineered for maximum performance. Specifically designed for use with 29er bikes with longer travel, these use a 36mm chassis for smooth and effective damping across unpredictable riding conditions. Adjustable Boost MTB Forks Allowing you to conquer every challenge from the mountain slopes to the forest floor, these off-road warriors are kitted out with a Roughcut HLR damper. This allows you to effortlessly tweak their high and low speed compression, rebound and air pressure to match your riding preferences and the terrain conditions. This combined with a superb air spring gives you the freedom to benefit from a more controllable and customisable riding experience wherever your next adventure leads you.
Ready to smooth out every terrain in your way, this confidence-instilling, Boost-sized fork has an aluminium main build and magnesium-cast lowers for a stiff, responsive and sturdy performance no matter what. Giving six clicks of low-speed compression adjustment and over 30 high-speed adjustments, no bump or landing is too intimidating, while the Off The Top (OTT) and Advanced Volume Adjust (AVA) features work together for better small bump sensitivity and control of your full stroke. With 14 clicks of shim stack-controlled damping and a closed cartridge bladder system, customising the rowdiness of your run using different configurations is encouraged, making this stiff and supportive fork an impressive choice for the aggressive and exhilarating rider.
Ready to race, the dazzling DVO Diamond D1 model is built around aluminium stanchions and magnesium-cast lowers, giving a long-lasting and dependable performance. Giving you six clicks of low-speed compression adjustment and 24 high-speed tweaks, fine-tuning your suspension to your favoured spec is easily achieved, while Off The Top (OTT) adjustment to the negative spring gives better small bump sensitivity and stroke feel. Featuring shim stack-controlled damping and a closed cartridge bladder system, the DVO Diamond D1 29 flattens each run and with it different configurations, it's as versatile as it is customisable. It's an excellent choice for the enduro and downhill enthusiast. The updated Diamond has a host of features to cater to the aggressive rider who demands more. DVO gave the fork a top to bottom chassis overhaul with 10mm wider BOOST spacing. This amplifies steering precision and control in the moments of "ultimate shred". DVO also increased the tyre clearance, allowing you to utilise a bigger tyre and still have clearance for mud. Combining the stiff chassis characteristics with DVO's exclusive features and damping design gives DVO forks a unique ride feel unlike anything else on the market.
Using the same chassis as Manitou's Mezzer Pro suspension fork, this model features 37mm stanchions that are constructed from 7000 series aluminium and Reverse Arch technology. This allows it to deliver exceptional stiffness and strength, while also being incredibly lightweight at only 2030g (27.5” option). As a result, the Expert is the second lightest fork in the Enduro category, second only to the Mezzer Pro of course. Another highlight is it comes race-ready with an Expert Air air spring with Incremental Volume Adjust (IVA) for an impressively smooth feel as you charge across challenging terrain conditions. It also offers a wide range of adjustment features from its Variable Terrain Tune (VTT) damper that can easily be tweaked to suit any terrain thanks to its six positions. With adjustable Air, Air Volume, Rebound, 6-position Compression (Open, Trail, Lock), this suspension fork is the smart choice for anyone looking to dive into the Enduro Fork market. Enduro Fork with Expert Air Spring Expert Air is derived from Manitou's Dorado Air system and features a unique balancing valve that equalizes the positive and negative air chambers during the air fill process. This valve is activated only when the pump is threaded completely onto the valve. This gives the spring rate a smooth and consistent feel without any flat or dead spots in the stroke. Six Position Variable Terrain Tune (VTT) Damper Adjusted through a single external compression adjuster, both high-speed and low-speed damping characteristics are changed simultaneously when turning the knob. The damper features a fixed shim stack and a secondary shim stack that is preloaded by the external adjuster. In positions 1 and 2 there is an open flow path through the compression damper. In positions 3-6, the adjustable shim stack comes into contact with the piston, increasing platform force. This design provides a wide tuning range that combines the benefits of a low-speed platform and a high-speed progressive tune that can suit any terrain through 6 positions. Hexlock SL Axle Manitou's patented hex axle locks the lower legs in place, eliminating rotation around the axle providing unsurpassed stiffness in a lightweight tooled package. Additional Item Top Features: Adjustments: Air, Air Volume, Rebound, 6-position Compression (Open, Trail, Lock) Offset: 37/44OS (27.5" Option); 44/51OS (29" Option) Ride Height: 534-574mm (27.5" Option); 554-594mm (29" Option) Travel: Multiple options available. Internally adjustable in 10mm increments Brake Post Mount: 180mm (223mm Max) Max Tyre Size: 69mm w/ Fender 74mm Without Optional: Fender Kit (sold separately) E-Pac: Yes 44OS 140-180 (27.5" Option); 51OS 140-160mm (29" Option) Technologies: - 37mm stanchions, Reverse Arch design, and Hexlock SL2 axle combined together result in ultimate stiffness. - Expert Air offers ultimate sensitivity featuring a self-equalizing negative air spring. - IVA (Incremental Volume Adjuster) allows you to modify your positive air chamber volume by rearranging self contained spacers. You'll never lose a volume spacer again. - VTT-6P damper provides 6 easy clicks to dial in your damping for all types of terrain. - Integrated fender can be installed/removed by three small screws threaded into the arch of the fork. - TSR (Trail Side Relief) valves on the back of the lower legs allow you to bleed off built up air within the lower legs to keep things butter smooth between service intervals. Manufacturer's Part Numbers: 191-36964-A101 Black 29" x 180mm 44mm 191-37137-A101 Black 27.5" x 180mm 37mm 191-36964-A103 Black 29" x 160mm 44mm
Specifically designed for XC racing, this high-quality suspension fork is part of Fox Suspension's renowned Factory Series with a build that's feature-packed and engineered to exceed the demands of Factory-level riders. It's equipped with an updated chassis that's 15% stiffer than the 32 standard model as well as a revised arch shape that offers improved head tube clearance with shorter rakes. Developed from the ground up to deliver uncompromised cross country racing performance, it's also kitted out with a Float EVOL air spring and a FIT4 3-Position damper for a high level of tuneability and control. Coming complete with a genuine Kashima upper tube coating that's slippery smooth and ultra-durable, this is a great choice of upgrade for dependable front-end suspension performance on the most demanding of racing conditions. Float EVOL Air Spring Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. The 34 SC also comes with the option to tune the negative air spring with a volume spacer. FIT4 3-Position Damper In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjustment in the Open mode, allowing riders to fine-tune their exact damping preferences. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks, Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimises stiffness with the absolute minimal amount of material.
Made for enduro excellence, this confidence-instilling Diamond D1 version has an aluminium main build and magnesium-cast lowers, for a reliable and durable performance at every turn. Giving six clicks of low-speed compression adjustment and 24 high-speed adjustments, fine-tuning is made easy, while Off The Top (OTT) adjustment to the negative spring improves the small bump sensitivity and stroke feel. Shim stack-controlled damping and a closed cartridge bladder system allow you to customise how rowdy you like your run to be through the use of different configurations, making this stiff and supportive fork an impressive choice for the venturesome rider.