DMR Defy 50+ Mountain Bike StemThe ideal addition to your mountain bike (MTB), the Defy 50+ Stem features a durable 35mm clamping standard, for exceptionally smooth handling over tough terrains. Made from lightweight and hard-wearing CNC Machined 6061 Alloy it benefits from a low stack height, short 50mm length and low 5-degree rise. Designed for Modern GeometryDesigned for use with modern frames that feature longer top tubes for increased stability, the Defy 50+ offers precise control and is CNC machined to reduce weight. Also, to prevent knee injuries, the sides are further CNC machined to enable the clamping bolts to sit internally.Features: Material: CNC 6061 Alloy Top-Close clamp design Stem Cap Included: YesStack Height: 31mm Stem Angle:Reach: 50mm Rise: 5mm Dimensions: 95mm Long / 55mm Wide / 54mm TallWeight: 189gBuy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Take It To The Trail Made to crank from dawn till dusk, the Turbine 35 stem is the boss when it comes to XC racing and hard-charging trail riding. Stiff and light, this 35mm diameter sleek-looking CNC'd aerospace aluminum alloy body makes this stem an easy choice.
This stem is designed to complement the Fizik Cyrano handlebars and seatposts. Review Please read the Wiggle review of the Fizik Cyrano R1 handlebar written by a member of staff.
Deda Elementi Zero1 Road StemLightweight, aerodynamic and rigid, the Zero1 road bike stem will improve your bike’s handling and performance. Made from 6061 aluminium, it benefits from Deda Elementi’s advanced 3D forging process. This results in accurate handling and efficient power transfer as you’re sprinting and attacking the climbs. In addition to this, its flat top section matches the look of modern road bike frames and it’s reversible so you can obtain your desired riding position.Features: Material: 6061 3D forged Aluminium, embossed "D" logo Drop: 36mm Screws: Chromoly (CrMo) Angle: +7° / -83° Invertible: Yes Stem Cap Included: No Weight: 145g (110mm) Manufacturer's Part Numbers:Black - Black 90mm: DSH90BBlack - Black 100mm: DSH100BBlack - Black 110mm: DSH110BBlack 120mm: DSH120BABlack - Black 130mm: DSH130BBuy Deda Elementi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.Black - Black 130mm: DSH130BBlack - Black 90mm: DSH90BBlack 120mm: DSH120BA Black - Black 100mm: DSH100BBlack - Black 110mm: DSH110B
Fizik Cyrano R1 Road StemThis durable lightweight Road Stem from Fizik is the ideal component for your bike. Benefiting from a variety of lengths you can choose the right stem to fit your ride, what's more, it can be easily installed and is made from sturdy Ergal Aluminium, this is a component that won't let you down. Features:Material: Ergal Aluminium (7075-T6)Clamp diameter: 31.8mmBolts: Titanium Torx boltsLength: 70, 80, 90, 100, 110, 120, 130mm (except no 70mm in +/-20-degree angle)Angle: +/- 7 or +/-20 degreesStack height: 40mmWeight: 128g (110mm/7 degrees)Steerer: 1-1/8”As ridden at UCI World Tour level by AG2R Pro Cycling TeamBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Cyrano R1 Road StemThis durable lightweight Road Stem from Fizik is the ideal component for your bike. Benefiting from a variety of lengths you can choose the right stem to fit your ride, what's more, it can be easily installed and is made from sturdy Ergal Aluminium, this is a component that won't let you down. Features:Material: Ergal Aluminium (7075-T6)Clamp diameter: 31.8mmBolts: Titanium Torx boltsLength: 70, 80, 90, 100, 110, 120, 130mm (except no 70mm in +/-20-degree angle)Angle: +/- 7 or +/-20 degreesStack height: 40mmWeight: 128g (110mm/7 degrees)Steerer: 1-1/8”As ridden at UCI World Tour level by AG2R Pro Cycling TeamBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Because bigger is most definitely better CNC machined AL 7050 construction and a 35mm clamping diameter for ultimate strength and control Weight from 150g Available in 35 to 100mm lengths Stack: 4mm
Because bigger is most definitely better CNC machined AL 7050 construction and a 35mm clamping diameter for ultimate strength and control Weight from 150g Available in 35 to 100mm lengths Stack: 4mm
The Service Course stem delivers all you look for in a stem—strength stiffness reliability a precise fit and distinctive look. The Service Course stem offers a faceplate and body design for greater stiffness and easier installation. It’s high performance and high value. The Service Course stem’s shape and 3D-forged construction results in an improved stiffness-to-weight-ratio. The stem design along with distinctive graphics also complement the aesthetics of modern frames. Made from 6061 aluminum the stem resists flexing during sprints and accelerations. FEATURES Faceplace and body geometry designed for greater stiffness and easier installation Two cosmetic options bead-blast black or distinctive silver ±6° and ±25° rise stem available Leading stiffness-to-weight Secure with four bolt faceplate using Torx® T25 bolt heads Zipp QuickView integrated mount available separately Lifetime warranty SPECIFICATIONS STEM ANGLE/RISE 25 degrees 6 degrees LENGTH (ST) 100mm 105mm 110mm 120mm 130mm 60mm 70mm 75mm 80mm 90mm CLAMP DIAM 31.8mm STEERER CLAMP DIAMETER 1-1/8 in COLOR/FINISH (ST) Blast Black Bright Silver MATERIAL (SP/ST) Al-6061 HARDWARE Steel FACE PLATE BOLT DISTANCE-HORIZONTAL 27mm FACE PLATE BOLT DISTANCE-VERTICAL 42mm
Geoff Slattery Signature Top Load Stem from Eclat. Using a traditional, solid classic topload design, Geoff’s stem features 30mm rise and a wide faceplate with larger head bolts to allow the bars to be really clamped down and prevent them from ever slipping. The Slattery Stem also utilises the STC (Shark Tooth Clamping) system, which allows the knurling on the bar to bite into the stem even harder and keep them in place, even after the burliest of drops or big gaps. ###section### Product Specs TYPE: Top Load REACH: 51mm RISE: 30mm CLAMPING DIAMETER: 25.4mm WEIGHT: 367g/12.9oz
The Quantum Lite is engineered to work with 35mm bars, plus you won't feel any flex, even with the widest of bars. Cold forged from high-quality AL6061-T6 aluminium and combined with a short reach makes it a perfect match for bikes with modern geometry. Furthermore, its knee friendly steerer tube clamp design and a 'no gap' front plate system give it a unique, smooth look. It's one of the lightest stems on the market and strong enough to survive even the most aggressive of rides.
Built using a durable and dependable 3D Forged AL-2014 alloy, this Pro stem is made to deal with the pressures of high-speed road riding. Making full use of its four-bolt headlock clamp, it keeps a firm and focused hold on your bar, resulting in precise handling and steady steering, no matter how fast your run is. Suitable for use with 31.8mm steerers, it comes equipped with a +/- 10-degree angle to set your bars at your favoured height for maximum steering comfort and positioning.