The Park Tool CRS1 Crown Race Setting System has taken a fresh new approach to crown race installation. Traditionally, a mechanic would slam a tube down onto the bearing surface to set the race in place. The CRS1 offers a different approach that offers faster, safer, and more precise installation. The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube and into the top end of the insert. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS1 set includes one universal setting tube, three 1 inserts, and three 1-1/8 inserts.
A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1 inch setting rings and three 1-1/8 inch setting ringsSafer and easier to use than traditional slide hammers
With two different insert rings and an aluminium insert preventing any direct contact with your bearing's surface, the Oversized Crown Race Setting System CRS-15.2 allows you to gently tap the end cap to fix the race firmly and accurately in place. Bundled with an extension for working on fork steering tubes up to 425mm, this is a great bit of kit making sure your races are set correctly.
Key Features: Two-sided spoke wrench is designed for Mavic wheel sets.,Long handle gives good leverage for stubborn spoke nipples.,Fits both Mavic 7-spline 6.4 mm outer diameter and 6-spline 9 mm outer diameter Mavic nipples.,Made in the USA and covered by Park's legendary limited lifetime warranty.,
Key Features: Two-sided spoke wrench is designed for Mavic wheel sets.,Long handle gives good leverage for stubborn spoke nipples., Fits both Mavic 5.65 mm threaded eyelets and 7 mm integrated nipples., Made in the USA and covered by Park's legendary limited lifetime warranty.,
The Park Tool SW13C is a comfortable, vinyl dipped, two-sided Spoke Wrench. It's designed to easily access Mavic fittings. Fits both Mavic 9mm threaded eyelets and 7mm integrated nipples.
A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1 inch setting rings and three 1-1/8 inch setting ringsSafer and easier to use than traditional slide hammers
Replaces standard headset with Pitlock coded nut and headset cap
The Joint VPD System Elbow is a highly flexible 2ply elbow protector which conforms with international shock absorbtion standards. The elbow protector features a highly efficient ventilation system and an outer fabric which is made with high tenacity polyamide yarns for low friction and high abrasion resistance. VPD is the perfect material for mountain biking as it wraps around a riders body shape when warm which gives great freedom of movement on a bike. To protect riders during a fall the VPD technology then hardens on impact to help minimise injury.Key Features:Extremely flexible and light VPD elbow pad,EN 1621-1 certified shock absorption,Ventilation system constructed within each layer to optimize moisture management and comfort,Low friction polyamide construction high abrasion resistance.
Keep riding with ultimate protection, comfort and flexibility with the Joint VPD System Knee soft knee protector that works as one with the body.The POC Joint VPD System Knee is a lightweight, highly flexible protector that works with the body in all riding positions, warming to and moving as one with the body. In a fall, the material hardens, absorbing the force from any impact. The knee protector conforms to the toughest EN 1621-1 Level 2 standards and features a highly efficient ventilation system to stop the wearer overheating. The outer fabric is constructed from high-tenacity polyamide yarns creating a low friction surface with high abrasion resistance.Choose VPD system to experience POC's most sophisticated protection that blends low friction materials with a breathable construction for comfort and extremely high impact absorbency. Key Features: Extremely flexible and light VPD knee pad,EN 1621-1 Level 2 certified shock absorption,Ventilation system constructed within each layer to optimize moisture management and comfort,Low friction, polyamide construction with high abrasion resistance.
POC Spine VPD System VestPOC's Spine VPD System Vest is a flexible and moulded back protector with the highest level 2 (1621-2) certification. The woven back fabric uses monofilament threads and a Kevlar reinforced barrier to establish resistance and anti-penetration which provide maximum abrasion resistance.The vest also features extreme ventilation channels for maximum moisture control, an internal waist strap and a chest pocket.Features:Moulded back protector with extremely flexible hexagon geometryVentilation channels for optimised moisture controlKevlar reinforced spinal area for anti-penetration protectionZone based ventilation systemInternal waist strapChest pocketEN1621-2 level 2 certified back protectorBuy POC Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
Reinforcing your ride with comfort and safety, the POC Spine VPD System Vest is extremely flexible and sports a moulded back protector to ensure you are fully protected when shredding aggressively. The spinal area is supported by a KEVLAR barrier for anti-penetration protection and the back has flexible hexagon geometry, making this vest one of the safest on the market. A true offroad warrior, the Spine VPD vest is also highly breathable and sports ventilation channels that optimise moisture control should you work up a sweat. To keep you secure there is an internal waist strap while those who need to store loose change can make good use of the chest pocket.