Updated version of Merritt's trusty top load stem. Same clean design details and strength as the original, now with a 30mm rise. CNC’d 6061 aluminum with a 50mm reach. ###section### Product Specs TYPE: Top Load REACH: 50mm RISE: 30mm CLAMPING DIAMETER: 22.2mm WEIGHT: 314g
Alex Valentino Signature BMX stem from United. The Valentino stem is machined from a single block of 6061 aluminium and features a top load design with a 23mm rise. The Stem also features the stronger sold type bolts, simple side cuts and a cool recessed fork hole for that flush look with your top cap ###section### Product Specs TYPE: Top Load REACH: 48 or 52mm RISE: 23mm CLAMPING DIAMETER: 22.2mm WEIGHT: 278g
The Daily Grind Barkeep stem is CNC machined from 6061-T6 aluminum with a recessed compression bolt area for a flush fitting top cap, channeled front and bottom section along with machined sides to reduce weight, rounded edges and an engraved Daily Grind logo. 35mm Rise, 50mm Reach, 12.4 oz. ###section### Product Specs TYPE: Top Load REACH: 50mm RISE: 35mm CLAMPING DIAMETER: 22.2mm WEIGHT: 12.4 oz
The KP (Kevin Peraza) Signature Stem is constructed from 6061 CNC aluminum with a clean tapered body. It features a wider clamping area, rounded edges and internal machining for weight. A stealthy CNC KP Cow Head on the top of the stem and a CNC Demolition on the face. Finally a perfect cut-out for a recessed fork compression bolt. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### Product Specs TYPE: 22.2mm REACH: 50mm RISE: 8.5mm (upright) / 23.5mm (inverted) CLAMPING DIAMETER: Front Load WEIGHT: 280g (9.87oz)
Introducing the Metra stem from Eclat. Using full CNC machining, Features include; STC (Shark tooth Clamping) for additional handlebar clamping strength, unique offset rear for improved clamping, CNC machining under the stem to reduce weight ###section### Product Specs TYPE: Top Load REACH: 51mm RISE: 30mm CLAMPING DIAMETER: 25.4mm WEIGHT: 367g
The V3 Team addition top load stem has been subtly updated with rounded edges and a new design which reduces weight but increases strength.
The Hex Lab front load stem is a modern 28.6mm, oversize stem designed specifically for BMX racing. When used with our Hex Lab Carbon Fiber Handlebar, you get the absolute stiffest cockpit available in this size. This added stiffness significantly improves bike handling while putting more upper body power into your pedal stroke, translating into more forward momentum. This isn’t just hype. Every rider we've worked with who have used the Hex Lab Stems along with the Hex Lab Handlebars has noticed a major improvement in stability and control. Hex Lab Front Load stem bodies are 3D cold-forged and CNC-machined from the highest quality 6061-T6 aluminum. The lightweight front clamps are cold-forged and CNC-machined for increased stiffness and strength. ###section### Product Specs TYPE: Front Load REACH: 40mm/45mm RISE: 5mm CLAMPING DIAMETER: 28.6mm WEIGHT: 106 grams / 3.7 ounces (40mm) E5
The Box Two Hollow Center Clamp stem is cold forged from the highest quality 6061-T6 aluminum available. Featuring an open skeletal design and a dual mid-bolt wedge mounting system, they are lightweight yet maintain a very high level of strength. A 53mm extension stem weighs just 218g/7.7oz. By removing the rear pinch bolts and moving the mounting bolts to the middle of the stem, Box reduced the weight and E3size and eliminated a serious hazard to the rider’s knees. These stems come with either a 48mm or 53mm extension and have a 22.2mm clamping diameter. To ensure proper clamping force, the stem must be mounted on a fork with at least 45mm of exposed steerer tube. Not compatible with forks that have carbon fiber steerer tubes. ###section### Product Specs TYPE: Front Load REACH: 40mm/45mm/48mm/53mm RISE: 5mm CLAMPING DIAMETER: 22.2mm WEIGHT: 218g/7.7oz (53mm) E4
The Mankind Sunchaser Stem is constructed from CNC machined 6061-T6 aluminium for maximum strength and durability. It features a classic lifted top load design with a truly clean look finished with a CNC machined Mankin logo on the top. To keep things clean there are no side cutouts and a recessed fork cap bolt. ###section### Product Specs TYPE: 22.2mm REACH: 34.5mm RISE: 50mm CLAMPING DIAMETER: Top Load WEIGHT: 330g (11.64oz)
The Index stem uses a unique "wedge" shape, giving it a smooth look yet retaining a generous 16mm of rise for riders who prefer a taller bar position without sacrificing the classic front load stem look. With the addition of a few small spacers under your stem, you will be able to setup the Index stem to an equal height to many topload stems on the market. ###section### Product Specs TYPE: Front Load REACH: 33mm RISE: 16mm CLAMPING DIAMETER: 22.2mm WEIGHT: TBC
Top load stem from Relic. With a sligthly higher rise than the elect stem the eon stem features the same internal machining to keep the weight down and Relic Logo on the top plate. ###section### Product Specs TYPE: Top Load REACH: 53mm RISE: 29mm CLAMPING DIAMETER: 22.2mm WEIGHT: 312g
Top load stem from Relic. The stem has been machined out internally to keep the weight down and features a classic top load design with the Relic Logo on the top plate ###section### Product Specs TYPE: Top Load REACH: 52mm RISE: 22mm CLAMPING DIAMETER: 22.2mm WEIGHT: 312g