The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride. The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market. The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio.We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride. The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly.Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
The Thomson Elite seatpost is over 40% stronger on ultimate strength tests than the strongest production seatposts on the market.The Elite has double the fatigue life of any other production models tested. The tube and head of the Thomson seatpost are integral machined from one piece of high strength 7000 series Aluminium. The head is not pressed or bonded in. This allows for superior strength and minimum weight.7000 series Aluminium41mm Seat Rail grip lengthAvailable in 250mm, 330mm, 367mm and 410mm lengthsAvailable in all seatpost sizes-5° to +29° Tilt adjustment228g weight (330mm length)Certified to: EN 14766 2006 MTB and DIN CERTCO: 2006 MTBIt s incredibly lightweight, approximately 201g (250mm length) for road bikes and 228g (330mm length) for mountain bikes. The natural ellipse bore inside tube creates an optimum strength-to-weight ratio. We have a long 1.614 inch (41mm) seat rail grip length. This helps prevent seat rail bending from impact loads. Most other seatposts have grip lengths of at least 0.5 inch shorter than our grip length.The Thomson seatpost design incorporates a bending fuse to prevent catastrophic failure. All competitive seatposts tested, failed catastrophically with the seat and clamp components, sometimes pieces of the tube and head flew off in all directions.The Thomson seatpost has a clamp, head and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seatpost will bend slightly and allow the rider to come to a safe stop or finish the ride.The Thomson seatpost has all parts captive and can easily be attached to a seat without dis-assembly. Infinite tilt adjustment minus 5° and plus 29°. Very low profile clamps mean no seat interference as the swivel nuts are down between the seat rails. The designs and materials have passed extensive life and ultimate strength tests. Our ongoing testing program ensures that every production lot of seatposts meets Thomson standards. Impact absorbing clamps in the seatpost will spread and flex on impact to protect seat, rails, and rider. The seats survive heavy impact loads without bending the rails.
Ritchey WCS 1 Bolt SeatpostThe WCS 1 Bolt Seatpost features Ritchey's unique "Sidebinder" single bolt clamp design, which provides quick and secure engagement. Also, its wide saddle clamp plate reduces stress on lightweight hollow saddle rails. This model also features 20mm of offset to help you obtain that aero race position.Features: Material: 3D forged TR741 Aluminium shaft and clamp Low-profile head Wide saddle clamp Rail Clamp Size: 7x7mm Offset: 20mm Weight: 195g (27.2mm, 350mm)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ritchey Comp Carbon SeatpostBuilt to add efficiency, comfort and without adding unnecessary bulk to your bike, the Comp Carbon Seatpost boasts Ritchey’s full carbon fibre shaft and strong and lightweight 6061 aluminium clamp head. This construction means less of your pedalling effort is wasted through unwanted flexing and sudden impacts and vibrations are dampened, so you can stay in control and enjoy the ride.Carbon Comp Seatpost Ready for action, Ritchey has equipped this superb component with a Unidirectional (UD) carbon finish which adds another layer of stiffness and durability to this already solid component. Furthermore, its two-bolt clamping system is extra secure and easy to install, so you can put your trust in this dependable model on every journey.Features: Material: Shaft: Carbon Fibre; Clamp Head: 6061 Aluminium Finish: Unidirectional (UD) Carbon Offset: 25mmDiameter: Separate 27.2mm and 31.6mm optionsLength: Separate 350mm and 40mm optionsMininmum Post Insert in Bike Frame: 100mm Cradle: 43x38mm Bolt: 2-boltSaddle Clamp Torque: 13Nm (maximum)Seat Collar Torque: 6Nm (maximum) / 7Nm (maximum) for Ritchey steel framesManufacturer's Part Number: 41036008001 Weight: 229g (27.2mm version approx)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ritchey Comp Carbon SeatpostBuilt to add efficiency, comfort and without adding unnecessary bulk to your bike, the Comp Carbon Seatpost boasts Ritchey’s full carbon fibre shaft and strong and lightweight 6061 aluminium clamp head. This construction means less of your pedalling effort is wasted through unwanted flexing and sudden impacts and vibrations are dampened, so you can stay in control and enjoy the ride.Carbon Comp Seatpost Ready for action, Ritchey has equipped this superb component with a Unidirectional (UD) carbon finish which adds another layer of stiffness and durability to this already solid component. Furthermore, its two-bolt clamping system is extra secure and easy to install, so you can put your trust in this dependable model on every journey.Features: Material: Shaft: Carbon Fibre; Clamp Head: 6061 Aluminium Finish: Unidirectional (UD) Carbon Offset: 25mmDiameter: Separate 27.2mm and 31.6mm optionsLength: Separate 350mm and 40mm optionsMininmum Post Insert in Bike Frame: 100mm Cradle: 43x38mm Bolt: 2-boltSaddle Clamp Torque: 13Nm (maximum)Seat Collar Torque: 6Nm (maximum) / 7Nm (maximum) for Ritchey steel framesManufacturer's Part Number: 41036008001 Weight: 229g (27.2mm version approx)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
ULTIMATE USE Alien Carbon SeatpostThe Alien Carbon Seatpost has been specifically designed by ULTIMATE USE to provide outstanding performance for your road rides. Constructed from high-quality carbon fibre and benefiting from computer-aided design, it offers you the perfect balance of strength, rigidity and flexibility. This construction ensures you'll enjoy efficient power transfer and avoid the worst vibrations when riding over poor road surfaces.Features: Material: Carbon Fibre shaft, Aluminium clamp head Finish: 3K Matt Setback: 10mm Saddle Rail Compatibility: Clamp designed for standard 7x7mm saddle rails Recommended Seatpost Clamping Force: 3.5Nm Single-bolt saddle rail clamp design for faster and easier adjustments Alternative saddle rail clamps available to purchase separately Weight: 140g (27.2mm diameter, 300mm length)Buy ULTIMATE USE Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Never skimping on the strength, this lever is made from forged and machined 6061-T6 Aluminum for lightweight durability. To give your thumb a secure surface that it won't slip off of, this lever is covered with a textured non-slip pad.This lever is a sure thing with Race Face dropper posts, but it also actuates most cable operated posts needing 11mm or less of cable pull. Fitting nicely under your bar Turbine R 1x seatpost lever may just become your thumb's new best friend. Made strong, this lever works flawlessly and requires less force to actuate it. Optimized for Race Face but will work with other dropper posts. Specification:Lever ActuationMechanical,Compatible WithMatchmaker,Includes:Cable and Housing,Weight:66g.
This seatpost is the go to budget conversion part to allow a change in body position on the bike to suit time trailing or triathlon riding effortsThe saddle is pushed further forward, moving the centre over the bottom bracket in the same way as a steeper seat tube angle on a specific TT bike,A more powerful aerodynamic position can be achieved,Traditional 73 degree seat tube angles are increased to 78 degrees with a physical move forward of up to 38 mm,Full aluminium construction is shot peened for and sculpted to deliver aerodynamic benefits,27.2 mm or 31.6 mm diameter,300 mm long,Weight from 310 grams.
Profile Design Fast Forward Aluminium SeatpostCarrying you every mile of your journey, this brilliant seatpost converts your road bike frame geometry into a more aggressive aero position. It features a 38mm forward offset which means you can maintain your momentum as you stay focused on a podium-topping finish. Profile Design has also equipped this model with a micro-tilt adjustment, so you can fine-tune its comfort to suit your riding style or the terrain conditions.2-Bolt Forward SeatpostKitted out with a two-bolt, non-reversible head, this road warrior offers easy set-up and keeps you locked in place as you soar past your competitors. One final highlight is it weighs in at only 300g (approx), so you can enjoy its phenomenal strength properties without adding any excess grams to your ride.Features: Material: 6061-T6 Aluminium Use: Road Diameter: 27.2mm Length: 265mm Offset: 38mm, forward Bolt: 2-bolt, non-reversible Weight: 300g (approx)Buy Profile Design Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth ReMote Sustain Dropper LeverIdeal for accompanying you on your off-road adventures, this brilliant model is equipped with a 6061 T6 aluminium construction. This makes it immensely durable as you weave between the trees and tackle any trailside obstacles which obstruct your path. Wolf Tooth has also added another layer of durability to this version by giving it a delrin axle and pusher, so you'll benefit from a tough component on rowdy rides. RockShox Reverb B-Post Dropper RemoteDesigned for use with RockShox Rever B-posts, this hard-wearing model is equipped with a leak-proof and low-maintenance mechanical actuation system. This makes it immensely easy to set-up and use while its easy cable detachment allows for straightforward servicing when needed. Solidly-mounted with a rattle-free integrated cable adjuster, this is a perfect choice of upgrade for riders who want smoother and more dependable drops as you dominate across the mountain. Features: Body Material: 6061 T6 Aluminium Axle and Pusher Material: Delrin Use: MTB Seatpost Compatibility: RockShox Reverb B-post Clamp Compatibility: Shimano IS-AB Weight: 31g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.