The head is offset by 22mm and features an adjustable 2 bolt design which makes fitting a new saddle or adjusting the angle as easy as possible. A black UD finish with subtle graphics provides an understated stealthy appearance. Additional features include incremental markings to help you set your saddle height easily.
The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Now available in both a 125mm and 150mm travel options, it allows riders to infinitely adjust their saddle height to suit the terrain ahead. Ergonomic Shifter-Style Dropper Remote The ergonomic shifter style remote lever is designed to be run where your front shifter would normally sit. This means that this dropper is ideally suited for those using a 1x chainring set up; without a front derailleur. However, a paddle style shifter is available separately for those who want to use the Ascend with a front derailleur and shifter. For installation, the seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again. Please Note: This Ascend Seatpost is only compatible with bikes that can use an internally routed dropper. (Please note that it cannot be converted to external cable actuated - for externally routed bikes, please see the Ascend II 105/125mm/150mm travel version). Remotes supplied are suitable for MTB flat bars with a 22.2mm diameter. 1x fits in place of the front shifter on left side and 2x fits perpendicular to the bar beside the grip on either side. For CX bikes that need a 31.8mm bar, this can be found here. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 357mm 100mm 90 124 30.9mm x 357mm 100mm 90 124 31.6mm x 412mm 125mm 90 124 30.9mm x 412mm 125mm 90 124 31.6mm x 459mm 150mm 90 124 30.9mm x 459mm 150mm 90 124 Service Guide Information Click here to view the Brand-X Internal Dropper Post 100,125 Service Guide. Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide. Installation Guide Information Click here to view the Brand-X Ascend Internal Route Post Installation Guide.
Building on the success of the Ascend 01, Brand-X now offer a shorter drop 27.2mm diameter option. The 27.2mm diameter makes it an ideal option for CX, Gravel or Road riders who want to feel the benefit of a dropper. The post carries over the reliability and core qualities of the Ascend 01. Infinitely smooth adjustment and incredible value for money makes the Ascend CX the go to option for cylcocross riders. The Ascend Seatpost is only compatible with bikes that can use an internally routed dropper. (Please note that it cannot be converted to external cable actuated.)The seatpost is cable actuated at the bottom of the post via a linkage mechanism which eliminates cable pull/movement, to ensure consistent performance time and time again. The ergonomic paddle style remote lever is designed to be on either left or right hand side of your bars. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 27.2mm x 350mm 85mm 100 134 27.2mm x 400mm 105mm 120 154
Stealth Finish Manufactured for strength, stiffness and durability, this light and strong seatpost has a black anodised finish for an understated and stealthy appearance. It also features incremental markings to help you set your saddle height easily. Options Explained: 400mm 26.4mm: 350mm long post with a 26.4mm diameter 400mm 26.8mm: 350mm long post with a 26.8mm diameter 400mm 27.0mm: 350mm long post with a 27.0mm diameter 400mm 27.2mm: 350mm long post with a 27.2mm diameter 400mm 30.9mm: 350mm long post with a 30.9mm diameter 400mm 31.6mm: 350mm long post with a 31.6mm diameter
Strong, stiff and durable, this post is built to last. It also has a micro-adjustable 2-bolt clamp head that makes saddle installation easy and helps you to find the correct angle quickly. Available in a range of sizes to suit various frame's seat tube sizes, it has a stealthy black anodised finish with incremental markings to assist with setting saddle height. Options Explained: 350mm 27.2mm: 350mm long post with a 27.2mm diameter 350mm 30.9mm: 350mm long post with a 30.9mm diameter 350mm 31.6mm: 350mm long post with a 31.6mm diameter
Building on the success of the original Ascend, Brand- X now offer a long drop externally routed option with the Ascend II XL. The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing. The post comes with an ergonomic 1X lever. The cable is actuated from the mid cap ensuring zero cable movement. For those wishing to run a 2X set up, a right hand mount 'paddle' lever is available here: https://www.wiggle.co.uk/brand-x-ascend-lever-kit The Ascend Dropper seatpost set new standards for reliability and performance at a fantastic price point. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 489mm 170mm 100 138 30.9mm x 489mm 170mm 100 138 Service Guide Information Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide.
Brand-X have partnered with South Korean lighting specialist LightSKIN to offer you a seatpost with a difference. Switch the light on and change modes with one short press of the 1st LED. Press and hold the LED to switch the light off. The post has 3 light modes and kicks out 25 Lumens offering eyecatching visibility as the nights draw in. Offering 50 hours battery life in continuous light mode and 100 hours in flashing the Brand-X LightSKIN Seatpost is a workhorse and a minimilists dream. Lightskin have geniune credibility in this area and won the Prestigious Red Dot design award with this very product. Install the batteries at the base of the post, attach your saddle with the single bolt seat rail clamp and ride in style. Ideal for commuters and for those of us that that forget our lights or fear them being stolen.
Brand-X have partnered with South Korean lighting specialist LightSKIN to offer you a seatpost with a difference. Switch the light on and change modes with one short press of the 2nd LED. The post has 4 light modes and kicks out 25 Lumens offering eyecatching visibility as the nights draw in. Offering 10 hours battery life in continuous light mode and 50 hours in pulse mode, the Brand-X LightSKIN Seatpost is a workhorse and a minimilists dream. The post comes with a 2 metre micro usb charge cable allowing you to charge from home with the bike parked up. The charging port is located at the head of the post and is protected with a rubber cap Ideal for commuters and for those of us that that forget our lights or fear them being stolen.
Convert 31.6 seat tubes to allow a 30.9 or 27.2 seat post. Alternatively convert a 30.9 seat tube to take a 27.2 seat post. The 90mm length provides plenty of support within your frame
Available in both internally and externally routed options, this seat post actuator cover is perfect for helping you repair and maintain your Brand-X Ascend dropper seat post. The external option is a replacement actuator cover for Brand-X Ascend II External Route droppers. The internal option is an actuator cover/boot for Brand-X Ascend Internal Route droppers.
This kid's dropper seat post features a 27.2" diameter as well as 70mm of travel, so your little rider can get the same performance as you would normally expect on an adult's bike. Brand-X has also designed this kid's specific model to drop under a lower weight load, so they can enjoy the identical benefits of a dropper seat, while out on the trail. Ideally suited for riders aged six to twelve years old, this seatpost will drop under a 20kg load and Brand-X suggests a max load of 40kg. It is internally cable routed and comes with a 1x shifter for left-hand bar mount. This allows it to deliver the same reliability and peace of mind that comes as standard with all Brand-X dropper posts. The minimum insertion length is 80mm (including the actuator – this is 114mm of post). The total post length is 315mm. Installation Guide Information Click here to view the Brand-X Ascend Internal Route Post Installation Guide.
Available in both internally and externally routed options, this seat post maintenance kit is ideal for helping you repair and maintain your Brand-X Ascend dropper seat post. Internally routed options include OE replacement seals, bushing and brass keys. (no outer cable included) Externally routed options include OE replacement seals, bushing, brass keys and nylon outer cable and barrel. Each maintenance kit is unique to each travel option and is not cross-compatible. Please ensure that you marry up the correct kit to the routing and the travel of your Brand-X Ascend post. *Please double check your own dropper post prior to purchasing the kit. The internal route Ascend posts updated in 2020 and the maintenance kit sold here is specifically for those posts. Older model maintenance kits will be added to the site in due course. Service Guide Information Click here to view the Brand-X Ascend II 105, 125 External Route Dropper Post Service Guide. Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide. Click here to view the Brand-X Internal Dropper Post 100,125 Service Guide. Click here to view the Brand-X Internal Dropper Post 150, 170, 200 Service Guide.