The Ultimate USE Evo Carbon Seatpost features unique lay-up technology and the very latest carbon fibre polymer and composites combined with new computer design techniques to create Ultimate Use s lightest seatpost ever. The Ultimate USE Evo Carbon Seatpost is a great low weight option for any road or XC racer.Material: CarbonLength: 300mm / 400mmDiameter: 27.2mm / 30.9mm / 31.6mmSetback: InlineFinish: 3K Matt / UD MattWeight: 108g 182g
The Ultimate USE Evo Carbon Seatpost features unique lay-up technology and the very latest carbon fibre polymer and composites combined with new computer design techniques to create Ultimate Use s lightest seatpost ever. The Ultimate USE Evo Carbon Seatpost is a great low weight option for any road or XC racer.Material: CarbonLength: 300mm / 400mmDiameter: 27.2mm / 30.9mm / 31.6mmSetback: InlineFinish: 3K Matt / UD MattWeight: 108g 182g
Brand-X Ascend II Dropper Seatpost (105,125,150)Available in 105mm, 125m and 150mm travel options, the Ascend II mountain bike dropper enables you to quickly and reliably adjust your saddle height without interrupting your pedalling flow. Offering smooth and consistent operation, this budget-friendly component will put you in the perfect riding position for tackling every section of the trail.Externally Routed Dropper SeatpostBuilding on the success of the Ascend Dropper Seatpost, this aluminium dropper post is available for those who have a rig without internal cable routing: Brand-X is bringing affordable and reliable dropper posts to the people! With infinitely smooth adjustments and an ergonomic lever that can sit on the left or right of your cockpit, the Brand-X Ascend II Dropper Seatpost is the upgrade that your bike needs. To avoid cable movement/pull, this dropper seatpost's cable is actuated from the mid-cap and delivers consistent performance.Please Note: The 27.2mm option comes with the 2/3x Paddle Lever. The 27.2mm size also has a 2-piece saddle clamp so the saddle will sit slightly higher than on the 31.6mm and 30.9mm options.Features: Material: T6-6061 Aluminium Compatibility: Frames that do not have internal dropper post cable routing Bar mounted remote lever and cable operated external routing (included) Linkage mechanism eliminates any outer cable pull Zero offset, one-piece head/upper shaft with micro adjust clamping mechanism Length: 390mm, 400mm, or 449mm Travel: 105mm, 125mm or 150mm Cable Length: 1.5m Finish: Sand blasted and hard anodised Warranty: 2 years Not suitable for internal routing use Lever Clamp Diameter: 22.2mm Rider Weight: Min: 50-55kg; Max: 120kg Weight: 605g (30.9mm) without cable and paddle shifter (90g)Minimum Insertion Length Information: Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 27.2mm x 390mm 105mm 90 128 31.6mm x 400mm 125mm 90 128 30.9mm x 400mm 125mm 90 128 31.6mm x 449mm 150mm 90 128 30.9mm x 449mm 150mm 90 128 Service Guide Information:Click here to view the Brand-X Ascend II 105, 125 External Route Dropper Post Service Guide.Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide.Manufacturer Reference Codes: 125mm/31.6mm/400mm: BRNDXDRPA02316400125; 125mm/30.9mm/400mm: BRNDXDRPA02309400125; 105mm/27.2mm/390mm: BRNDXDRPA02272390105; 150mm/31.6mm/449mm: BRNDXDRPA02316449150; 150mm/30.9mm/449mm: BRNDXDRPA02309449150Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Ultimate USE Evo Carbon Seatpost features unique lay-up technology and the very latest carbon fibre polymer and composites combined with new computer design techniques to create Ultimate Use s lightest seatpost ever. The Ultimate USE Evo Carbon Seatpost is a great low weight option for any road or XC racer.Material: CarbonLength: 300mm / 400mmDiameter: 27.2mm / 30.9mm / 31.6mmSetback: InlineFinish: 3K Matt / UD MattWeight: 108g 182g
The SAVE Carbon seatpost has been proven in the worlds most challenging bike races. Light comfortable and incredibly functional.Subtle HollowGram and SAVE glossy graphics on matte carbon finish. Ultra-light continuous carbon fiber layup offers just enough compliance to take the edge off without sacrificing power transfer.Easy adjust two bolt head for fine tuning ride position. Offset: 15mmWeight: 27.2mm x 400mm version weighs in at just 202 grams! Compatible with round and oval and both metal and carbon rails. Available sizes: 25.4mm x 350mm25.4mm x 400mm27.2mm x 350mm27.2mm x 400mm
Race Face Next SL SeatpostNo fully-Cross-Country build is complete without a high-tech seatpost - and the carbon Next SL has performance written all over it. Lightweight, fully adjustable and optimised in every way, XC and trail riding have never felt better.The Race Face Next SL seatpost is engineered and manufactured using Race Face's optimised carbon technology process, offering outstanding strength for a lightweight XC and trail bike post. The seatpost's tube is manufactured using a highly tested and engineered unidirectional carbon, which offers outstanding fatigue and impact strength. Plus, a simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head.From Lab to TrailGreat mountain biking minds engineered and tested this unidirectional Next carbon tube, making sure it delivers big strength at a low XC weight.On The RailsThe NEXT SL post uses a simple, lightweight 2-bolt system that lets you install the saddle without disassembling the head. Brilliant!Comfortable SeatingGet that tilt right or you'll be walking funny for days. Tilt adjustment allows for 6° up/12° down with zero offset.Features: Material: Carbon fibre post, Alloy saddle clamping head Saddle Rail Compatibility: Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon Tilt Adjustment: 6-degrees up/12-degrees down Offset: 0mm Features Race Face's updated Hunter head design Angled clamp bolts allow easy tool access for hassle-free adjustment and tightening The rubber seatpost grommet fully seals the post to prevent water from entering your seat tube Wide lower cradle gives extra rail support for lightweight saddle rails Narrow upper cradle increases the amount of forward/back saddle adjustmentManufacturer's Part Number: OSP14NX27.2X400YS7211 Black 27.2mm x 400mm OSP14NX30.9X400PBLK7C Black 30.9mm x 400mmBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Next seatpost sets a new standard for a performance carbon post, featuring our new innovative Hunter head design that presents a rider with easy saddle installation, full adjustability and light weight goodness. The carbon tube is engineered & manufactured using Race Face's optimized carbon technology process, offering outstanding strength for a lightweight XC and trail post.Key Features:Features Race Face exclusive new Hunter head design,Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head,Thumbscrew tightening system allows quick dial in of the saddle angle by hand,Angled clamp bolts allow easy tool access for hassle free adjustment and tightening,The rubber seatpost grommet fully seals the post to prevent water entering your seat tube,Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon,Wide lower cradle gives extra rail support for lightweight saddle rails,Narrow upper cradle increases the amount of forward/back saddle adjustment,Tilt Adjustment 6° up 12° down with Zero offset,The seatpost tube is manufactured using our proven Next optimized carbon technology,The highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post..Specifications:Built For: XC/Trail,Size: 27.2, 30.9 & 31.6mm,Length: 400mm,Weight: 250g (30.9mm).
Brand-X Ascend II XL Dropper Seatpost (170mm)Ideal for taller cyclists or those who like the option of more height adjustment, the Ascend II XL is Brand-X's dropper post for the multi position rider. With 170mm of travel at its disposal, this externally routed seatpost provides a super steady adjustment to ensure your saddle is always right where you need it to be.Efficient and Smooth Action Dropper SeatpostThe post comes with an ergonomic 1X lever and the cable is actuated from the mid cap to eliminate any cable movement. The Ascend Dropper seatpost sets new standards for reliability and performance at a fantastic price point.Features:Material: AL6061-T6 AluminiumCable Routing: Bar mounted remote lever and cable operated external routingOffset: ZeroClamp Head: One-Piece, upper shaft with micro adjust clamping mechanismDimensions: Diameter: 30.9mm, Full Length: 489mm, Shaft Length: 264mmTravel: 170mmCable Length: 1.5mFinish: Sand-blasted, anodised blackRider Weight: Min: 50-55kg; Max: 120kgWeight: 670gMinimum Insertion Length InformationSize Minimum Insertion Length Minimum Insertion Length including the actuator (mm)31.6mm x 489mm 170mm 100 13830.9mm x 489mm 170mm 100 138Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide.Buy Brand-X Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Cyrano 00 Carbon SeatpostCyrano Seatpost 00: It's easy to get a perfectly balanced position with the Cyrano 00 seatpost - its rotational center means you can always get it right, regardless the amount of tilt of the clamp.Being made from high modulus uni-directional carbon fiber also delivers the ideal combination of very low weight together with maximum comfort.Features: Material: High Modulus Uni-Directional Carbon/Aluminium Ergal Seatback: 25mm Bolts: Titanium Diameter: 27.2mm Length: 330mm Weight: 175g. (27.2mm/330mm)Buy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Our EA90 Seatpost recieves the same technology in the head, helping you refine your positioning without needing to undo your rail clamps for each minute tweak. Saddle angle is then locked in place so you have the confidence your saddle will stay put after you find your fit.Key Features: Weight: 265g., Finish: Black Anodized., Head Offset: 20mm., Length: 350mm with 80mm min insert., Quill size: 27.2mm., Material: EA90 Alloy..
ULTIMATE USE Vybe Suspension SeatpostDesigned for mountain bike (MTB) cycling, the Vybe Seatpost from Ultimate Use reduces the impact from uneven terrain, ensuring you have a smooth ride, no matter what you meet on the trail. Offering a stable platform for your saddle, you can enjoy increased pedalling power thanks to its DURO clamp, which has been engineered to ensure the perfect saddle position to suit your needs.Serviceable and Rider-SpecificAll of ULTIMATE USE suspension seat posts are fully serviceable, adjustable for rider weight and give many years of loyal service with comfort, recovery and performance benefits. To achieve the optimum ride, choose your spring option from soft, medium or hard according to your weight. There is also a 'Pre-Load Adjustment' screw at the bottom of the post allowing you to fine-tune the post to give you the ultimate ride.Features: Material: Aluminium Adjustable: DURO rail clamp for fine angle adjustment Diameter: 27.2mm; 30.9mm; 31.6mm Seatpost Overall Length: 400mm Rider Weight Recommendation: Soft 38 - 55kg; Medium 55 - 80kg; Hard 80 - 100kg Weight: 400g Part No: ULTVYBEBuy ULTIMATE USE Componentsfrom Chain Reaction Cycles, the World's Largest Online Bike Store.
Building on the success of the original Ascend, Brand- X now offer a long drop externally routed option with the Ascend II XL. The post carries over the reliability and core qualities of the original. Infinitely smooth adjustment and incredible value for money make the Ascend II the go to dropper post for those riders that require external routing. The post comes with an ergonomic 1X lever. The cable is actuated from the mid cap ensuring zero cable movement. For those wishing to run a 2X set up, a right hand mount 'paddle' lever is available here: https://www.wiggle.co.uk/brand-x-ascend-lever-kit The Ascend Dropper seatpost set new standards for reliability and performance at a fantastic price point. Minimum Insertion Length Information Size Minimum Insertion Length Minimum Insertion Length including the actuator (mm) 31.6mm x 489mm 170mm 100 138 30.9mm x 489mm 170mm 100 138 Service Guide Information Click here to view the Brand-X Ascend II 150, 170 External Route Dropper Post Service Guide.