Whether you’re a pro or simply training hard, PRECISION powermeters deliver industry-leading accuracy, highly dependable cadence data, 3D powermeter technology capable of measuring tri-axial strain on your crank arm. Designed to be durable and lightweight, compatible with ANT+ and Bluetooth head units, PRECISION helps you train harder and smarter.PRECISION Ride Ready comes installed on a new Shimano left crank arm (105, Ultegra, or Dura-Ace). These crank arms will fit bottom brackets using the Hollowtech ii interface. Key Features: 3D powermeter technology (patent pending) measures tri-axial strain on your crank arm, Accurate, consistent data, Lightweight, compact design, Battery status indicator via 4iiii app, Compatible with ANT+, Bluetooth Smart head units, smartphones, and other 4iiii products, User-friendly app and configurable rider compensation scale factor, Easy setup and maintenance, . Specifications: Weight: 9 grams, Data accuracy: +/- 1% error margin, Battery life: 100+ riding hours on 2032 coin cell battery.
The stages power l for shimano grx rx810 is built onto the non-drive side of a shimano grx rx810 crank arm and is compatible with all frames that fit shimano grx rx810 cranks. Specifications: Stages power accuracy: ±1.5% (compares with generation 2.0 accuracy: ± 2%), Weight: only adds 15gr to base crank arm, Battery life: 200+ hours (coin cell: cr2032), Power range (watts): 0 to 2500, Cadence range (rpm): 20-220, Water resistance rating: ipx7, Frame compatibility: most frames, see fit guide in our support section, Device compatibility: ant+, bluetooth smart ready, Software compatibility: stages link, training peaks, strava, garmin training center and others,. Additional Features: Active temperature compensation, Accelerometer based cadence measurement, Tool free battery replacement,Lifetime access to stages link for power meter management and firmware upgrade,.
The Stages Power L meter is built to the proprietary Stages Power carbon left crank arm. The full carbon fiber Stages Power meter and crank arm is compatible with many SRAM GXP or BB30 cranks.The new Stages Power meter is slimmer, and up to 28-percent lower profile than our original meter. It's sleeker by way of a 17-percent reduction in frontal area, and we've also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200-percent over the previous design.Specifications:Stages Power L Accuracy: ± 1.5% (Compared with Generation 2 Accuracy: ± 2%),Power Meter Housing: New low profile design, with new door interface,Weight: Only adds 20gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power Range (Watts): 0 to 2500,Cadence Range (rpm): 20-220,Water Resistance Rating: IPX7,Frame Compatibility: Most frames, see fit guide in our Support section,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center and others,Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
Ridden by the pros, PRECISION PRO dual-side power meters deliver all the benefits of our left-side model (exceptional accuracy, lightweight design, ANT+ and Bluetooth compatibility, 3D powermeter technology), plus a specific breakdown of left and right wattage. Perfect for those who need specific power output from each crank side, or anyone who simply wants the best power meter on the market.Key Features:3D power meter technology (patent pending) measures tri-axial strain on your crank,Accurate, consistent data,Lightweight, compact design,Battery status indicator via 4iiii app,Compatible with ANT+, Bluetooth Smart head units, smartphones, and other 4iiii products,User-friendly app and configurable rider compensation scale factor,Easy setup and maintenance,Over-the-air upgrade capability for adding new features and updates,.Specifications:Weight: 25 grams (power meter only),Data accuracy: +/- 1% error margin,Battery life: 100+ hours on 2032 coin cell battery,Battery status indicator: Alert at 15% battery power.
Stages Power LR for Shimano Ultegra R8000 is a dual-sided power meter for those who desire bilateral measurement.SPECIFICATIONS:Accuracy: ± 1.5%,Weight: Only less than 35gr to base crank arm,Battery Life: 200+ hours (coin cell: CR2032),Power range (Watts): 0 - 2500,Cadence range (rpm): 20 - 220,Water resistance rating: IPX7,Frame Compatibility: Most frames, see fit guide in our Support section,Device Compatibility: ANT+, Bluetooth Smart Ready,Software Compatibiity: Stages Link, Today's Plan, Training Peaks, Strava, Garmin Training Center and others.ADDITIONAL FEATURES:Tool free battery replacement,Active temperature compensation,Accelerometer based cadence measurement,Wireless firmware upgrades.
A ride ready PRECISION 3 pod is already preinstalled on a brand-new Shimano crank arm at our factory. The moment you order, our fulfillment team will get it on its way to you, and you should be able to ride with power as soon as it arrives.Once your ride-ready PRECISION 3 powermeter arrives, it just needs to be installed on your bike using the standard Shimano crank installation process. Connect a headunit or computer, and you can start riding with power!Indoor TrainingIf the weather or climate make riding outdoors tough, your 4iiii PRECISION 3 powermeter can be used with all popular indoor-training apps, such as Zwift, TrainerRoad, Wahoo SYSTM, Rouvy, and more. Simply use your favourite app's connection procedure over ANT+ or Bluetooth Smart, put your bike on a trainer, and get riding!SpecificationsAccuracy: +/- 1%,Battery Type: CR2032 Coin Cell,Battery Life: Up to 800 hours,Waterproof Rating: IPx7,Cadence Range: 30 - 170 RPM,Power Range: 0 - 4,000 W,Height: 5.5mm,Weight: 9g,Operating Temperature: 0 to 50 °C,Communication Protocols: ANT+, Bluetooth.Accuracy in 3DNot everyone has the perfect pedal stroke. With +/- 1% accuracy, 4iiii is the only crank-based power meter to use 3 strain gauges to measure all forces in your pedal stroke.Ultra Low ProfileWith an ultra low profile design, the PRECISION 3 is compatible with more bike frames than ever before.Indicator LightAt a glance, you can now see when your power meter has turned on, performed a successful Zero-offset, or has a low battery. Although, don’t expect to see that low battery indicator for a while!WaterproofBased in the foothills of the Canadian Rockies, we were tired of training tools not designed to work in our tough environment. With an IPX7 waterproof rating you can be assured that your power meter can handle the toughest conditions.Ant+ & BluetoothGet the same numbers training inside and outside. The PRECISION 3 Powermeter is both ANT+ and BLE compatible so you can use it on your preferred head unit and favorite indoor training app.
A ride ready PRECISION 3 pod is already preinstalled on a brand-new Shimano crank arm at our factory. The moment you order, our fulfillment team will get it on its way to you, and you should be able to ride with power as soon as it arrives.Once your ride-ready PRECISION 3 powermeter arrives, it just needs to be installed on your bike using the standard Shimano crank installation process. Connect a headunit or computer, and you can start riding with power!Indoor TrainingIf the weather or climate make riding outdoors tough, your 4iiii PRECISION 3 powermeter can be used with all popular indoor-training apps, such as Zwift, TrainerRoad, Wahoo SYSTM, Rouvy, and more. Simply use your favourite app's connection procedure over ANT+ or Bluetooth Smart, put your bike on a trainer, and get riding!SpecificationsAccuracy: +/- 1%,Battery Type: CR2032 Coin Cell,Battery Life: Up to 800 hours,Waterproof Rating: IPx7,Cadence Range: 30 - 170 RPM,Power Range: 0 - 4,000 W,Height: 5.5mm,Weight: 9g,Operating Temperature: 0 to 50 °C,Communication Protocols: ANT+, Bluetooth.Accuracy in 3DNot everyone has the perfect pedal stroke. With +/- 1% accuracy, 4iiii is the only crank-based power meter to use 3 strain gauges to measure all forces in your pedal stroke.Ultra Low ProfileWith an ultra low profile design, the PRECISION 3 is compatible with more bike frames than ever before.Indicator LightAt a glance, you can now see when your power meter has turned on, performed a successful Zero-offset, or has a low battery. Although, don’t expect to see that low battery indicator for a while!WaterproofBased in the foothills of the Canadian Rockies, we were tired of training tools not designed to work in our tough environment. With an IPX7 waterproof rating you can be assured that your power meter can handle the toughest conditions.Ant+ & BluetoothGet the same numbers training inside and outside. The PRECISION 3 Powermeter is both ANT+ and BLE compatible so you can use it on your preferred head unit and favorite indoor training app.
Whether you’re a pro or simply training hard, PRECISION powermeters deliver industry-leading accuracy, highly dependable cadence data, 3D powermeter technology capable of measuring tri-axial strain on your crank arm. Designed to be durable and lightweight, compatible with ANT+ and Bluetooth head units, PRECISION helps you train harder and smarter.PRECISION Ride Ready comes installed on a new Shimano left crank arm (105, Ultegra, or Dura-Ace). These crank arms will fit bottom brackets using the Hollowtech ii interface.Key Features:3D powermeter technology (patent pending) measures tri-axial strain on your crank arm,Accurate, consistent data,Lightweight, compact design,Battery status indicator via 4iiii app,Compatible with ANT+, Bluetooth Smart head units, smartphones, and other 4iiii products,User-friendly app and configurable rider compensation scale factor,Easy setup and maintenance,.Specifications:Weight: 9 grams,Data accuracy: +/- 1% error margin,Battery life: 100+ riding hours on 2032 coin cell battery.
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Ultegra R8100 crank arm and is compatible with all Shimano Hollowtech II road drivetrains.
Ridden by the pros, PRECISION PRO dual-side power meters deliver all the benefits of our left-side model (exceptional accuracy, lightweight design, ANT+ and Bluetooth compatibility, 3D powermeter technology), plus a specific breakdown of left and right wattage. Perfect for those who need specific power output from each crank side, or anyone who simply wants the best power meter on the market.The PRECISION PRO Ride Ready comes pre-installed on a new Shimano crankset.Key Features: 3D power meter technology (patent pending) measures tri-axial strain on your crank, Accurate, consistent data, Lightweight, compact design, Battery status indicator via 4iiii app, Compatible with ANT+, Bluetooth Smart head units, smartphones, and other 4iiii products, User-friendly app and configurable rider compensation scale factor, Easy setup and maintenance, Over-the-air upgrade capability for adding new features and updates,.Specifications: Weight: 25 grams (power meter only), Data accuracy: +/- 1% error margin, Battery life: 100+ hours on 2032 coin cell battery, Battery status indicator: Alert at 15% battery power.
Rally™ power meters are tested to the extreme, so you can ride there too. Designed for road cyclists, the dual-sensing Rally RS200 features SHIMANO SPD-SL cleat compatibility and measures total power, cadence and left/right balance. Even monitor how you apply power throughout the pedal stroke. For single-sensing total power and cadence, check out Rally RS100. These durable pedals install like any other pedals and are easy to transfer between bikes. Instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone*, and review later on the Garmin Connect™ app. View your data on Strava, TrainingPeaks® and TrainerRoad for further analysis, sharing and more.Key Features:Superior pedal design installs like any other pedal and quickly transfers between bikes; compatible with SHIMANO SPD-SL cleats,Rally™?RS200 dual-sensing power meter measures total power, cadence, left/right balance, seated versus standing, platform centre offset and power phase,Works seamlessly with the Garmin ecosystem to allow for easy software updates via your Garmin watch, Edge® cycling computers or the Garmin ConnectTM app on your compatible smartphone,For postride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect™ app as well as platforms such as Strava, TrainingPeaks® and TrainerRoad,When the seasons change, you can transfer the spindle between Rally™ RK/Rally XC pedal body kits (sold separately), which are also compatible with the Vector™ 3 power meter,Battery life: up to 120 hours. *When paired with a?compatible smartphone downloaded with the Garmin Connect appTrainingPeaks is a registered trademark of Peaksware, LLC.
Rally™ power meters are tested to the extreme, so you can ride there too. Designed especially for off-road riders, the dual-sensing Rally XC200 features SHIMANO SPD cleat compatibility and measures total power, cadence and left/right balance. Even monitor how you apply power throughout the pedal stroke.These durable pedals install like any other pedals and are easy to transfer between bikes. Now you can have power whether you ride gravel, cross-country mountain bike or even cyclocross.Instantly see accurate power measurements on your compatible Garmin device (sold separately) or smartphone, and review later on the Garmin Connect™ app. View your data on Strava, TrainingPeaks® and TrainerRoad for further analysis, sharing and more.Key Features:Designed for off-road use, superior pedal design installs like any other pedal and quickly transfers between bikes; compatible with SHIMANO SPD cleats (sold separately),Rally™?XC200 durable dual-sensing power meter measures total power, cadence, left/right balance, seated versus standing, platform centre offset and power phase,Works seamlessly with the Garmin ecosystem to allow for easy software updates via your Garmin watch, Edge® cycling computers or the Garmin Connect™ app on your compatible smartphone,For postride analysis, data sharing, mapping, route planning and more, sync your data with the Garmin Connect™ app* as well as platforms such as Strava and TrainingPeaks®,Train indoors by connecting with the Tacx® Training app and additional third-party platforms, including TrainerRoad and more1,When the seasons change, you can transfer the spindle between Rally™ RK/Rally RS pedal body kits (sold separately), which are also compatible with the Vector™ 3 power meter,Battery life: up to 120 hours .*When paired with your compatible smartphone TrainingPeaks is a registered trademark of Peaksware, LLC.?