The Eggbeater is Crank Brothers original product and what started it all off. Simple, reliable and effective, the Eggbeater 1 is the latest incarnation of this legendary pedal.Unique design sheds mud with ease, making entry and release easierPremium brass cleats includedcleats can be reversed to alter release angle from 15 to 20 degreesStamped steel construction is highly durable2 Year warrantyThe Eggbeater 1 is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. As with the rest of the Crank Brothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 280g per pair Spindle: Forged scm435 chromoly steel Body: cast stainless steel Wings: stamped stainless steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Special edition colours: Silver/Black You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals. As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The Crank Brothers Eggbeater 3 clipless pedal provides the form and function of Crank Brother's exclusive four-sided entry, at a price that allows you to outfit any bike. Four-sided open design ensures quick and easy engagement every time as well as shedding mud build up fast making it perfect for XC, trail riding and cyclo-cross, be it racing or training.Key Features:Minimal & lightweight, the lightest Mountain Bike pedals in the world,Customizable float and release angle, to suit any rider,Premium bearings and Hex alloy endcap, make it easy to service the pedals,Double seal system,Traction pad compatible (1mm set included),Weight: 278g per pair,.
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform.Key Features:Release angle: 15° to 20°,Cleat: Premium brass cleats included,Warranty: 5 years,Weight: 428g per pair,Platform: Two piece aluminium + composite,Wings: Stamped steel,Spring: 300 series stainless steel,Spindle: Forged scm435 chromoly steel,Inner bearing: Bushing,Outer bearing: Cartridge,Traction pins: 8mm adjustable.
Mallet 2 PedalsSpecsbody material6061-T6 aluminumcleatsPremium brass cleats with shims includedendcapSlottedinner bearing typeIgus LL-glide bearingmax rider weightNo restrictionouter bearing typeEnduro cartridge bearingq-factor52mmrelease angle15° / 20°spindle materialForged scm 435 chromoly steelspring material300 series stainless steelwarranty5 yearsweight508g per pairwing materialStamped steel
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform.Key Features: Release angle: 15° to 20°,Cleat: Premium brass cleats included,Warranty: 5 years,Weight: 435g per pair,Platform: Two piece aluminium + composite,Wings: Investment cast steel,Spring: 300 series stainless steel,Spindle: Forged scm435 chromoly steel,Inner bearing: Needle,Outer bearing: Cartridge,Traction pins: 8mm adjustable.
The world’s most successful downhill / race pedal just got even better! Dual-chamfered edges reduce costly rock strikes, and combined with proven traction pad technology Mallet DH maximises your performance. Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Mallet DH are the clipless pedal of choice by most Pro World Cup riders.The ability to set the release angle of the cleats to either 15° to 20° means you can be really active on the pedal whilst still remaining attached to the bike. The concave pedal body gives a flat pedal feel with the assurance that you are connected to the bike.Key Features:Release angle: 15° to 20°,Cleat: Premium brass cleats included,Warranty: 5 years,Weight: 479g per pair,Platform: Extruded/machined aluminium,Wings: cast stainless steel,Spring: 300 series spring stainless steel,Spindle: Forged scm435 chromoly steel,Q-factor: 57mm,Inner bearing: igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails,Outer bearing: enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal,Traction pins: 8mm adjustable,Excellent mud-shedding: using the very open designed pedal platform,Dual chamfered edges to reduce rock strikes,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal,Extremely lightweight: pedal design is very simple with only a few key parts,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle.
The ultimate pedal for enduro riding and racing is now available in a premium edition featuring titanium wings and dual-chamfered edges to minimize weight and maximize performance. The mallet E 11 is the lightest mallet ever — designed and engineered for the rider who wants the best of the best, and nothing less.Key Features:Titanium wings to reduce weight,Dual chamfered edges to reduce rock-strikes,Exclusive double-anodized black and gold colorway,Concave platform for secure foothold,6 adjustable pins per side for grip,Traction pad technology customizable interface ,Ribbed body for better traction when unclipped,52mm q-factor for maneuverability on tight trails,Hex alloy endcap for durability,4-sided entry / superior mud shedding,Customizable float & release angle,Premium bearings & double seal system.Specification:Forged scm 435 chromoly steel spindle,6061-T6 aluminum body,6al / 4v titanium wings,300 series stainless steel springs,15° / 20° release angle,52mm q-factor,igus LL-glide inner bearing,enduro cartridge outer bearing,premium brass cleats with shims included,6 adjustable pins per side,alloy endcaps,5 year warranty.
The ultimate pedal for enduro racing and riding.The Mallet E was developed with the help of some well-known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well-loved features.There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Key Features:Concave pedal platform for a secure foothold. Like it's DH equivalent you get that flat pedal feel whilst running clipless.,49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent.,Ribbed body allows for better traction when unclipped,Chamfered edges for a reduction in rock strikes,Excellent mud-shedding: the design is very open.,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner Igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,Crank brothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..
The ultimate pedal for enduro racing and riding. This is how Crank Brothers position the new Mallet E pedal, taking everything they ve learned from years of running the Mallet DH range of pedals and refining it for the growing enduro racing scene. With a slimmed down body and chamfered edges to reduce rock strikes and a concave platform for a secure foothold the Mallet E offers the perfect blend of features that Enduro riders and racers are looking for. Featuring Crank Brothers new Traction Pad technology, the Mallet E s have removable pads to help tailor the interface between the pedal and your shoe of choice. The body is also features 6 adjustable pins and is ribbed for better traction when unclipped. Crank Brother s 4-sided entry offers easy clipping in and superior mud shedding compared to its rivals, meaning even in the worse conditions performance remains perfect. Add in a 5 Year Warranty and the Mallet E is the new benchmark for Enduro pedals.6061-T6 Aluminium bodyStainless steel springs/wingsForged chromoly steel axle15/20 Degree release angle52mm Q factorIgus LL-Glide and Enduro cartridge bearings6 Adjustable pins per sideAdjustable traction padsPremium brass cleats with shims included419g per pair5 Year warranty
The ultimate pedal for enduro racing and riding. This is how Crank Brothers position the new Mallet E pedal, taking everything they ve learned from years of running the Mallet DH range of pedals and refining it for the growing enduro racing scene. With a slimmed down body and chamfered edges to reduce rock strikes and a concave platform for a secure foothold the Mallet E offers the perfect blend of features that Enduro riders and racers are looking for. Featuring Crank Brothers new Traction Pad technology, the Mallet E s have removable pads to help tailor the interface between the pedal and your shoe of choice. The body is also features 6 adjustable pins and is ribbed for better traction when unclipped. Crank Brother s 4-sided entry offers easy clipping in and superior mud shedding compared to its rivals, meaning even in the worse conditions performance remains perfect. Add in a 5 Year Warranty and the Mallet E is the new benchmark for Enduro pedals.6061-T6 Aluminium bodyStainless steel springs/wingsForged chromoly steel axle15/20 Degree release angle52mm Q factorIgus LL-Glide and Enduro cartridge bearings6 Adjustable pins per sideAdjustable traction padsPremium brass cleats with shims included419g per pair5 Year warranty
Crankbrothers entry price point flat pedal offering the same optimal surface area with small and large pedal platform options.Key Features:Minimal 13mm thickness,9 metal pins per side for grip,Premium bearings and seal system,Stamp small recommended for size 37-43 shoes,Stamp large recommended for size 43-49 shoes,.Technical Specs:Pins - 9 per side mounted from the back,Body Material - Composite,Footprint - 100mm x 100mm small / 111mm x 114mm large,Inner bearing - IGUS LL Glide Bearing,Outer bearing - Enduro cartridge bearing,Spindle - 52mm forged 435 chromoly steel,Warranty - 5 years,Weight - 329g per pair.