The design for the original crank brothers pedal began out of frustration. The founders of crank brothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. A word on maintenance In order to keep your crank brothers pedals running smoothly, they recommend the following: clean pedals every 30 hours of riding remove the pedal body from the spindle and wipe it clean of any dirty grease apply fresh grease to the inside of the pedal before re-installing the spindle Pedal features: Excellent mud-shedding: the design is very open 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the Extremely lightweight: pedal design is very simple with only a few key parts Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rid Fit adjustment: crank brothers premium cleats can be adjusted for 10° release Customise the fit between your shoe and the pedal by using tread contact sleeves Crank brothers pedals are fully re-buildable for simple maintenance. There is a consistency in part When servicing this pedal, use the rebuild kit designed for level 1 & 2 pedals
crankbrothers Eggbeater 1 Mountain Bike PedalsEngineered to tackle tough mountain bike trails, the Eggbeater 1 Mountain Bike Pedals from crankbrothers features a lightweight, durable stamped steel construction and a long-lasting Chromoly (CrMo) spindle for unrivalled performance.Features: Stamped steel body and inner wing with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and outer bearings Plastic end cap Brass cleat and mounting hardware included Body Material: Stamped SteelSpindle: Forged CrMo steelBody & Wings: Stamped steelSpring: 300 series stainless steelInner Bearing: BushingOuter Bearing: CartridgeCleats: Premium brass cleats includedRelease Angle: 15 or 20 degreesWeight: 290gBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Eggbeater 1 Mountain Bike PedalsEngineered to tackle tough mountain bike trails, the Eggbeater 1 Mountain Bike Pedals from crankbrothers features a lightweight, durable stamped steel construction and a long-lasting Chromoly (CrMo) spindle for unrivalled performance.Features: Stamped steel body and inner wing with steel spindle add strength and stability without a weight penalty Low-profile design delivers a more powerful and efficient pedal stroke 6° of knee-saving float with a choice of a 15 or 20° release angle gives you a customized fit for the trail Delrin bushing inner and outer bearings Plastic end cap Brass cleat and mounting hardware included Body Material: Stamped SteelSpindle: Forged CrMo steelBody & Wings: Stamped steelSpring: 300 series stainless steelInner Bearing: BushingOuter Bearing: CartridgeCleats: Premium brass cleats includedRelease Angle: 15 or 20 degreesWeight: 290gBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Ideal pedal for recreational riders who commute and tour,Combines SPD mechanism on one side and flat pedal body on the other, you can ride with cleats or normal shoes,Serviceable cup and cone bearings add to long life of the pedals,Adjustable cleat tension means you can start off with loose tension for extra easy engagement and release, and turn up the tension as you progress,Weight: 533 grams.
Ideal pedal for recreational riders who commute and tour that combines SPD mechanism on one side and flat pedal body on the other you can ride with cleats or normal shoes. Serviceable cup and cone bearings add to long life of the pedals Adjustable cleat tension means you can start off with loose tension for extra easy engagement and release and turn up the tension as you progress Weight 533 grams per pair
The Link features a flat platform, which is perfect for almost any casual ride and gives you the freedom to ride and walk in the comfort of your favourite shoes. On the other side, we have included the ATAC clipless system, with lets you clip-in with your favourite cycling shoe, giving you extra pedalling efficiency when you find yourself on longer or faster trips.Axle component: Steel axleBearings: SteelBody component: Glass-filledCleats: ATAC Easy cleatsPedal stack height: 19mmAngular freedom: n/aContact surface area: n/aDistance pedal spindle / crank arm: 54mmLateral freedom: 5mmRelease angle: 10° with ATAC Easy cleats, 13 or 17° with ATAC cleatsTension: noThreading: 9/16 - 20 inchWeight (per pedal): 174gColour (Pedal): BlackAccessories: ATAC Easy cleatsIntended use: City, UrbanPower Measurement: Not CompatiblePart Weight (g): 174
Time Xpresso 4 Road PedalsTIME revolutionizes automatic pedal technology and introduces a new generation XPRESSO. This new engagement has a more fast, intuitive, without friction due to Iclic concept is a system of pre-opening automatic (TIME patent) The use of a carbon blade bending instead of traditional metal spring allows these new pedals one extreme lightness. Its platform oversize 700mm ² gives a coefficient Surface Support/weight record. Features: Steel shaft with composite body and blade bending composite. Support area Oversize 700mm ² with interchangeable stainless steel skid plates Weight: 224g/pair BioPerformance Pre-opening automatic engagement mechanism Regulation of angular sensations Q Factor setting (Lateral) Bioposition concept, minimal distance sole/Axis pedal Angular freedom (/ -5 °) and lateral (2.5mm) Heaving angle: 15 °Buy Time Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
THE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS. The LOOK design team has completely remodeled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency. Optimized Contact Surface The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedaling. This creates a feeling of unrivaled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. Specifications: Usage: Recreational To Competition Body: Composite Axle: Chromoly + Pedal Stack Height + Cleats: 17,3 Mm Contact Surface Area: 500 Mm² Float: 8 Or 12 Adjustable Spring Cleats: Kéo Grip Cleats Pedal Weight: 130 Gr (328 Gr Per Pair With Cleats And Screws) Colors: Black Or White Accessories: A Pair Of Grey Kéo Grip Cleats + Screws Guaranty: 2 Years, Look Warranty Policy
This is thanks to the I-Clic concept of a pre-open clipless system (TIME patent). Also, the use of a carbon flexion blade instead of the traditional metal spring allows for these new pedals to be extremely light. The oversized platform of 700 mm2 gives the pedals a record surface area/weight factor.
Salida 12 Hydration PackFor those who like to hit the trail with their essentials neatly organised, the Osprey Salida 12 Hydration Pack combines a comfortable and breathable AirScape™ backpanel alongside a hydration sleeve, multiple pockets and handy LidLock™ helmet attachment.The Osprey Salida 12 Hydration Pack has been designed for days on the trail. Boasting a women’s-specific fit, the technical and high-performance hydration pack balances a tough and durable construction with impressive organisational capacity and a progressive, stylish aesthetic.Salida 12 features a comfortable AirScape™ backpanel with large air channel, promoting air-flow during hot and humid conditions whilst hugging the body closely with a stable and comfortable fit. Held in place by a breathable, pocketed hip-belt and performance-fit harness, Salida 12 will stay put no matter how hard you need to pedal. The sternum strap also has an innovative closure mechanism, allowing you to open and close it without taking your eyes off the trail.Internally, the Salida 12 features a large central pocket, with multiple internal organisation options such as side-mounted pump pockets and multiple zipped mesh pouches. This is all accessible through a full-length opening, allowing you access to the whole contents of your pack, ideal for when you need to fix a mechanical or find a snack bar. Salida 12’s front shove-it pouch provides an easy place to store a wet jacket, but even makes carrying a full-face helmet easy, while the Lid-Lock™ allows a storage place for a traditional bike helmet. For storing your sunglasses or small essentials, there’s a scratch-free pocket inside the front panel, alongside a brightly coloured clip to ensure that you’re never separated from your keys.Features:AirScape™ backpanelSternum strap buckle with magnet; Padded hip-beltZippered panel accessLidLock™ bike helmet attachmentFront shove-it pocket; Zippered scratch-free sunglasses and electronics pocket; Twin zippered hip-belt pocketsInternal hydration sleeve; Internal key attachment clipGlove friendly bucklesSide compression strapsReflective graphics; LED light attachment pointDimensions (cm): L43 x W23 x D23; Capacity: 12 litres; Weight: 0.6kgBuy Osprey hydration from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Pro Sam Hill Enduro MTB PedalsThe go-to choice for MTB (mountain bike) riders, the Nukeproof Horizon Pro Sam Hill Enduro MTB Pedals offer incredible control and strength for tackling the toughest of trails. Made with a durable aluminium platform construction, they are more than prepared to handle all the challenges you can throw at it. These pedals are forged making them durable and the CNC-machining process ensure they are lightweight, so you don't have to worry about adding weight to your hardtail or full suspension ride. Sam Hill Enduro MTB PedalsDeveloped by mountain bike legend Sam Hill and long-time mechanic Jacy Schumilak, these MTB pedals are engineered for maximum performance. Using all the proven internal parts of the Horizon Pro pedals, these signature enduro pedals spin on high-quality DU bushings with two sealed cartridge bearings. This makes the Nukeproof Horizon Pro Sam Hill Enduro Race Pedals an ideal choice of upgrade for riders who want a reliable pedal stroke in all-weather conditions.Click here to view and download the Nukeproof Flat Pedal InstructionsClick here for a Step by Step Installation GuideThis pedal is fully serviceable. It can be stripped and rebuilt using the guide hereFeatures:Body Material: Forged and CNC-machined 6061-T6 AluminiumAxle Material: CrMoUse: MTB, EnduroAxle: 9/16"Bushings: 2x DU bushingsBearings: 4x sealed Z989 cartridge bearings (per pair)Spare Pins Included: NoDimensions: 111x99x18mm (LxWxD)Weight: 407g (pair, approx)Manufacturer Part Numbers:Black: 102270551SH03PEDFLBLKBrown: 102270553SH03PEDFLCOPBlue: 102270552SH03PEDFLBLUGrey: 103257409SH03PEDFLGRYPurple: 103257410SH03PEDFLPURRed: 103257411SH03PEDFLREDBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The new KEO 2 Max is the product that will give you the confidence you need to go beyond your personal limits.The Look design team has completely remodelled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency.Optimized Contact Surface: The pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best.Improved Spindle Profile: The spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally.A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play.The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.Key Features:Usage: Recreational to Competition,Body: Composite,Axle: Chromoly +,Pedal stack height + cleats: 17,3 mm,Contact Surtace Area: 500 mm²,Float: 8 or 12 adjustable spring,Cleats: Keo Grip Cleats,Pedal weight: 130 gr (328 gr per pair with cleats and screws),Accessories: A pair of Grey Keo Grip cleats + screws..