The Versa is DMR s newest mountain bike pedal, featuring a clip in mechanism on one side and DMR s world famous platform on the other side.Versatile clip in one side, World famous DMR platform on the other sideLight 465g per pairSlim 14mm foot bedLow Profile For great clearanceTough Extruded 6061 Aluminium and 4140 CroMo Steel axlesTuneable 10 pins per Versa pedal. Optional pins included to fine-tune the gripServiceable High load DU bush and cartridge bearingNow you can ride up with the efficiency and control of being clipped in. At the top, flip the pedal and go fully foot out flat out on the way down. A clipless pedal and mtb flat pedal in one!
Alloy body pedals from Duo built with lightweight durability in mind. These pedals feature a heat treated crmo spindle and have a generous concave and 12 removable pins each side to suit trails riders and those of you who like some grip on your pedals. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Nylon BEARINGS: Looseball PACK SIZE: 2 (Pair) WEIGHT: 411g / 14.5oz
Our new Base Pedals deliver biting traction, and at pricepoint that doesn't hurt.Drawing from the pin layout on our first LG1 Plus and LG1 Race pedals, our newest Base composite pedals use the exact same 22-pin pattern in order to achieve the same biting traction our first pedals were so well known for.The 100 x 110mm composite platform houses the 22 pins (11 per side), an inboard bushing + outboard bearing, and steel axle. This combination spins smooth, and will last for years to come.
Our new Base Pedals deliver biting traction, and at pricepoint that doesn't hurt.Drawing from the pin layout on our first LG1 Plus and LG1 Race pedals, our newest Base composite pedals use the exact same 22-pin pattern in order to achieve the same biting traction our first pedals were so well known for.The 100 x 110mm composite platform houses the 22 pins (11 per side), an inboard bushing + outboard bearing, and steel axle. This combination spins smooth, and will last for years to come.
In keeping the original 22-pin layout used on our first LG1 Pedals, our new Plus aluminium pedals use the exact same 22-pin pattern in order to achieve the same biting traction our first pedals were so well known for. The 100 x 110mm machined aluminium platform houses the 22 pins (11 per side), a big inboard bearing and two outboard bearings, and a steel axle. Fully rebuildable.
Specifically designed to deliver biting traction at a price point that doesn't hurt, this flat pedal is well-equipped for the rigours of modern mountain bike (MTB) trail riding. Its hard-wearing composite body provides a fantastic balance of strength and durability, while also keeping its weight reduced to a minimum. e.thirteen has also kitted it out with a heat-treated steel spindle for extra toughness as you weave your way from trail to trail. 22 Pin MTB Pedals Drawing from the pin layout on e.thirteen's first LG1 Plus and LG1 Race pedals, the Base composite pedals use the exact same 22-pin pattern in order to achieve the same biting traction e.thirteen's first pedals were so well known for. The 100x110mm composite platform houses 22 pins (11 per side), an inboard bushing + outboard bearing, and steel axle. This combination spins smooth and is designed to increase longevity. Sold as a pair. Manufacturer's Part Numbers: E13PE2001 Black 9/16" E13PE2002 Bright Red 9/16"
The Eclat AK pedal uses a full-bushing system, which allowed us to take up the space where a loose ball bearing would sit, and just enlarge the axle, making it almost indestructible. Eclat have so much faith in the strength of the spindle that they offer a full lifetime guarantee against the spindle breaking or bending under riding conditions, and will offer a full replacement spindle should you do so. The AK pedal uses a fully replaceable Nylon/Fibreglass pedal body with a larger platform than most to give your foot ample room to feel comfortable, no matter where your foot lands. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Nylon BEARINGS: Bushing PACK SIZE: 2 (Pair) WEIGHT: TBC
When it came to designing the Contra pedal, Eclat were having trouble keeping the pedal profile thin while not sacrificing the strength of the spindle. Instead of taking an ‘off-the-shelf’ spindle, they went and developed their own custom option which uses a smaller caged bearing, but stays thicker closer to the crank arm where you need the strength the most. With removable pins on one side of the pedal, you can keep one side nice and grippy, and one side for grinding on. You can also put the steel pins in after the molded pins have been worn down to give more life to your pedal. The end result is a super low profile pedal, with an axle built to withstand the force of today’s toughest riding. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Injection molded nylon / fibreglass BEARINGS: Looseball PACK SIZE: 2 (Pair) WEIGHT: 389g (13.72oz : 0.85lbs) (per pair)
The Eclat Plaza Pedals are the result of wanting to design a larger pedal that doesn't weight too much. Their wider body and CrMo spindles give the Plaza an improved lifespan while the knurled top surface and durable pins give it superior grip. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Nylon BEARINGS: Looseball PACK SIZE: 2 (Pair) WEIGHT: 450g / 15.9oz
Eclat's Seeker Pedal was born thanks to many of their Pro team asking for a pedal with a larger platform than most, but with a slightly thinner profile. Regular unsealed bearings limit how thin you can actually make the pedal body without the bearing and axle getting smaller and weaker, so the solution was to use battle-proven dual bearing and bushing system from Eclat's legendary Surge pedal. Thanks to this construction technique the Seeker boasts a thinner profile to any of Eclat's other pedals without having any unecessary raised areas. A micro-knurled surface and durable pins adds plenty of grip and traction. The twin sealed bearing and bushing design adds extra support while the enlarged axle size makes it much stronger than a typical unsealed pedal, it's also. much smoother and longer lasting too. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: injection molded nylon / fibreglass BEARINGS: Sealed PACK SIZE: 2 (Pair) WEIGHT: 395g (13.95oz) (per pair)
The Slash Alloy Pedal is a low profile, micro style alloy pedal utilising a loose ball bearing system with an integrated and replaceable CrMo spindle. It's a slim, lightweight and durable design that comes with replaceable pins so you're never short of grip. ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Alloy BEARINGS: Looseball PACK SIZE: 2 (Pair) WEIGHT: TBC
Eclat riders were asking for a low profile, micro style pedal that utilised the loose ball bearing system with a crmo spindle, it didn't take long for Eclat to deliver the Slash nylon pedal! It's somewhere close to perfect in size, featuring a lightweight design and a proper grippy knurled top surface. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Injection molded nylon / fibreglass BEARINGS: Looseball PACK SIZE: 2 (Pair) WEIGHT: 389g (13.72oz : 0.85lbs) (per pair)