We took our iconic V8/V12 body design and redesigned it. Lower profile larger platform and forged lightweight body make the V12 the most versatile sealed bearing at pedal around.V12 the Past Present and future of at pedal performance.100mm Long 95mm Wide [Platform] by 16mm High420g per pair
DMR does performance composite.Presenting the V11 pedal. For those that favour the durability compliance and affordability of composite pedals the new benchmark choice from DMR has arrived! The V11 is moulded with the same proven shape as the multi award-winning Vault pedal providing a huge platform with DMR’s unique concave shape that allows your foot to sit deep into the centre for supreme grip. V11’s durable glass reinforced nylon body features eleven replaceable steel pins each side for rock solid grip. All pins are secured with captive locknuts for ultimate durability. Outer pins are Vault Moto pins that sink deep into your shoe keeping your foot well and truly planted. V11 is fully rebuildable with the dedicated V11 service kit guaranteeing ride after ride with no-nonsense performance. • Durable glass reinforced nylon body.• Large platform area 105mm x 105mm.• Low profile body with concave foot bed.• Tuneable pins with outer Moto Pins for serious grip.• Strong 4140 Cro-mo black steel axles (9/16') with 6mm hex key fitting.• Fully serviceable for long life.• Weight 450g/pair.• Colours: Black Blue Green Orange Purple Red Turquoise Yellow. • Weight 450g/pair.• Platform area 105mm x 105mm.• 4140 Cro-mo black steel axles (9/16').
The newest member of the DMR pedal family, the V6 is a Nylon evolution of our newest V12 body design. It has the same concave footprint and narrow profile that DMR pedals are known for, whilst spinning on our new Dual DU bush system.Key Features:Cromo axle,Dual DU bush system,327g per pair,Full length off road pins,Available in a range of vivid colours.Non-serviceable design
Updated DMR V8 pedal design from the Classic shapeSharing the concave shape and durability that the iconic V8 became famous for the new version has a larger platform area and serviceable Dual DU bushing system.Pins can be tuned for preferred grip and feel.FeaturesLarge Platform Area,Ultra-Low Profile,480g Per Pair,Serviceable Dual DU Bush System,10 Tuneable Pins Per Side,Heavy Duty 4140 Cro.Mo Steel Axles,Die Cast Aluminium Body.SpecificationTough Diecast Body,CroMo axle.
The DMR Brendog Vault pedal is now available in either Stealth or Ice.The DMR Vault pedal is a tuneable flat pedal designed specifically for riders who want a bigger platform. Equally at home on an all mountain or downhill setup, the DMR Vault pedal offers great stability and grip for the bumpiest of trails.Also included spare moto pins with the DMR Brendog pedals, perfect for more aggressive riding and capable of WC level Downhill racing.Key Features:Stealth Black or Ice finish,Large: 105mm x 105mm,Light: 430g per pair,Slim: 17mm concave foot bed,Low Profile: For great clearance,Big Platform: For the biggest jumps,Tough: Extruded 6061 Aluminium and 4140 CroMo Steel axles,Tuneable: 11 pins per DMR Vault Brendog pedal. Flip the pins to fine-tune the grip,Serviceable: High load DU bush and cartridge bearing,Aggressive ‘MOTO’ pins also included.Specifications:Extruded and CNC Machined Aluminium body,4140 CroMo plated axle,105mm x 105mm Platform area,17mm Concave,22 replaceable Moto pins,430g per pair.
Larger Platform AreaThe new DMR V12 pedal offers 10% more surface area than the classic shape. This means better grip and also support for rougher conditions and bigger hits.Lower ProfileAt just 16mm deep the DMR V12 is as slim as we could go whilst still retaining our legendary concave feel.Lighter WeightThere is a 20% weight saving from the last V12 with the standard version weighing under 430g per pair and the Magnesium at just 350g.The DMR V12 pedal runs on fully sealed bearings and a cro-mo axle. All pins on the pedal are replaceable and tuneable for preferred grip.Sealed Bearings,Cro-Mo Axle,Classic DMR Concave,Platform: 95mm x 100mm..NB Torque setting at the Axle to Crank, for all the DMR Bikes pedal range, is 40 - 55Nm.
The DMR Vault pedal is a tuneable flat pedal designed specifically for riders who want a bigger platform. Equally at home on an all mountain or downhill setup, the DMR Vault pedal offers great stability and grip for the bumpiest of trails.Key Features:Large: 105mm x115mm,Light: 430g per pair,Slim: 17mm concave foot bed,Tough: Extruded 6061 Aluminium and 4140 Cro-mo Steel axles (9/16"),Tuneable: 11 pins per pedal. Flip the pins to fine-tune the grip,Serviceable: – High load DU bush and cartridge bearing.
Freeride legend; Andreu Lacondeguy has been flying the DMR Vaults for a while now. To celebrate his 2014 Red Bull Rampage victory we offered him a signature colourway, the Lacon Vault pedal.Low profile for great clearance,Big platform for the biggest jumps,Oil slick finish,.Key Features:Large: 105mm x 105mm,Light: 430g per pair,Slim: 17mm concave foot bed,Tough: Extruded 6061 Aluminium and 4140 Cro-mo Steel axles (9/16"),Tuneable: 11 pins per pedal. Flip the pins to fine-tune the grip,Serviceable: – High load DU bush and cartridge bearing,Aggressive ‘moto’ pins also included.
Our brand new V12 design made from lightweight diecast Magnesium.70g lighter than the standard V12.,100mm Long, 95mm Wide [Platform] by 16mm High,350g per pair.
The next chapter unfolds as DMR “clips in” for the future with the V-Twin clipless pedal.Based around the world renowned SPD technology we have engineered the most adaptable caged-clip system on the market. The DMR V-Twin offers a huge number of different grip and feel options. Using our range of pins paired with a unique Nylon “bumper” and Metal Shim feature, this DMR clip in pedal can be customised to optimise your float and preferences and improve your ride experience.An extruded and CNC machined custom DMR Alloy cage with fully sealed (fully serviceable) bearing system allows the V-Twin to take seasons of abuse in the toughest of environments whilst maintaining a low weight.Tuneable platform height with Nylon Bumper, Metal Shim plate, foot pegs.Key Features:• Large Flat Platform Area• SPD compatible design• Nylon ‘Bumper’ design• Steel sizing-shim set included• Weight 546g as a Pair• Serviceable Bearing system• 7 Tuneable Pins Per Side (full set supplied)• Heavy Duty 4140 Cro.Mo Steel Axles• Tough Extruded Aluminium Body, CNC machined• 5º float cleat set supplied• Anodised coloured finish.
DMR does performance composite. Presenting the V11 pedal. For those that favour the durability, compliance and affordability of composite pedals, the new benchmark choice from DMR is here.The V11 is moulded with the same proven shape as the multi award-winning Vault pedal, providing a huge platform with DMR’s unique concave shape that allows your foot to sit deep into the centre for supreme grip. V11’s durable glass reinforced nylon body features eleven replaceable steel pins each side for rock solid grip. All pins are secured with captive locknuts for ultimate durability. Outer pins are Vault Moto pins that sink deep into your shoe, keeping your foot well and truly planted. V11 is fully rebuildable with the same proven internals as DMR Vault pedals, guaranteeing ride after ride with no-nonsense performance. Key Features: Large platform area 105mm x 105mm ,19mm thick,Low profile body with concave foot bed,Tuneable pins with outer Moto Pins for serious grip,Strong 4140 Cro-mo black steel axles (9/16") with 6mm hex key fitting,Fully serviceable for long life,Weight 450g/pair,Colours: Black, Blue, Green, Orange, Purple, Red, Turquoise, Yellow. ,..
The new Vault Mag MTB pedal is here, born from our quest for production methods that are more environmentally friendly and less wasteful. Thanks to the unique use of pressure die casting technology, the Vault Magnesium achieves these goals. Best of all, it is now available at a more obtainable price. When performance is paramount, the Vault Mag flat pedal delivers at just 404g. Key Features:ED Painted black finish only.,Tried and tested at pro level.,17mm concave footbed.,Cro-Mo Axle.,High Load DU bush system.,Cartridge Bearings.,404g per pair.,Replaceable steel pins..