The ultimate pedal for enduro racing and riding.The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features. There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Available in black or blue colour options with the standard 52mm axle or half black / half blue with the longer 57mm axle. Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped Chamfered edges for reduction in rock strikes Excellent mud-shedding: the design is very open. 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Mallet E Weight (per pair) 419g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Pins 12 pins per pedal Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
The ultimate pedal for enduro racing and riding. The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features. There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped Chamfered edges for reduction in rock strikes Excellent mud-shedding: the design is very open. 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Specification Weight (per pair): 419g Spindle: Forged scm 435 chromoly steel Body: 6061-T6 aluminium Wings: 17-4PH stainless Spring: 300 series stainless steel Inner bearing: Igus LL-glide bearing Outer bearing: Enduro cartridge bearing Pins: 12 pins per pedal Cleats: Premium brass cleats included Release angle: 15° or 20° Warranty: 5 years
The world’s most successful downhill / race pedal just got even better! Dual-chamfered edges reduce costly rock strikes and combined with proven traction pad technology Mallet DH maximises your performance. Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Mallet DH are the clipless pedal of choice by most Pro World Cup riders. The ability to set the release angle of the cleats to either 15° to 20° means you can be really active on the pedal whilst still remaining attached to the bike. The concave pedal body gives a flat pedal feel with the assurance that you are connected to the bike. Release angle: 15° to 20° Cleat: Premium brass cleats included Warranty: 5 years Weight: 479g per pair Platform: Extruded/machined aluminium Wings: cast stainless steel Spring: 300 series spring stainless steel Spindle: Forged scm435 chromoly steel Q-factor: 57mm Inner bearing: igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails Outer bearing: enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal Traction pins: 8mm adjustable Excellent mud-shedding: using the very open designed pedal platform Dual chamfered edges to reduce rock strikes Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal Extremely lightweight: pedal design is very simple with only a few key parts Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal. The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel. The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43 and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated. Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness. 20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges. Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Small: 100mm x 100mm pedal body footprint Large: 114mm x 111mm pedal body footprint Available in red or black Specification Weight: 345g (Small) 375g (Large) Spindle: Forged scm 435 chromoly steel Body: Forged 6061-T6 Inner bearing: Igus LL-glide bearing Outer bearing: Igus LL-glide bearing Body dimensions: 100mm x 100mm (Small) 114mm x 111m (Large) Pins: 10 adjustable pins per side Warranty: 5 years
crankbrothers Mallet E LS PedalsDesigned for enduro riding, the Mallet E LS Pedals from crankbrothers will give you the extra edge. Featuring longer spindles for enhanced control and optimised clearance, they're equipped with 6 adjustable pins per side, traction pads, and a ribbed body, guaranteeing a slip-free and stable platform. They feature a four-sided easy engagement system, so you can just stamp down and go and also benefit from sealed cartridge bearings for excellent durability that's ready for whatever challenge you meet on the trail.PerformanceThe concave pedal platform offers a more secure foothold. Like it's DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.FitIncreased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.DurabilityOuter enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.MaintenanceCrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features: 6 adjustable pins per side for grip 4-sided entry Superior mud-shedding capabilities Chamfered edges to reduce rock-strikes Premium bearings and double seal system Cleat Type: Premium brass cleats with shimsCleat Included: YesBody Material: 6061-T6 Aluminium/Composite Spindle Material: Scandium 435 Chromoly (CrMo) Wing Material: 17-4PH Stainless Steel Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Release angle: 15°/20° (customisable)Q-Factor: 57mm Weight: 424g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Mallet E PedalsDesigned with Enduro racing in mind, the Mallet E Pedals from crankbrothers feature a unique concave platform that gives you a stable and secure foothold for optimum control when tackling tough trails. PerformanceThe concave pedal platform offers a more secure foothold. Like it's Downhill (DH) equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. The ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.FitIncreased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately.Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.DurabilityOuter enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.MaintenanceCrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessPins: 12 pins per pedalSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyCleat: Premium brass cleats with shims includedWeight: 419g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Mallet E PedalsDesigned with Enduro racing in mind, the Mallet E Pedals from crankbrothers feature a unique concave platform that gives you a stable and secure foothold for optimum control when tackling tough trails. PerformanceThe concave pedal platform offers a more secure foothold. Like it's Downhill (DH) equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. The ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.FitIncreased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately.Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.DurabilityOuter enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.MaintenanceCrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessPins: 12 pins per pedalSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyCleat: Premium brass cleats with shims includedWeight: 419g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Performance The concave pedal platform of this model offers a more secure foothold. Like its downhill (DH) equivalent, you get that flat pedal feel whilst running clipless. They're 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design of the crankbrothers Mallet E also provides excellent mud shedding. Plus, they also boast 4-sided entry, meaning you can clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal. Fit Increased float: 6° of side-to-side rotational play. The float of crankbrothers Mallet E Pedals allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Durability The outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Maintenance Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit. Additional Information: Warranty: 5 years
Engineered for powering you through the roughest of terrain conditions, these DH-orientated pedals are equipped with a fully CNC-machined pedal body construction for maximum strength and durability. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you. Downhill Clip-In Pedals with Large Platform Size Perfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability. Technologies: - Fully serviceable and re-buildable - Titanium axle upgrades are available separately - Q-Factor – 55mm - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. - Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. - Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability. Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS Silver
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.