Whether you're riding for the joy of it or pushing for the top spot on the podium, you get the best of both worlds with a slim profile and incredible support from the large contact area that translates into superior comfort and maximum power transfer. Technologies: Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.
Look Keo 2 Max Road PedalsWith a thin body for reduced drag and wider size, the Keo 2 Max road bike pedals make your feet more stable and make the most of your power delivery. Made with a tough composite body, a plate of hard-wearing stainless-steel and a chromoly (CrMo) axle, their modern design complements the styling of today’s bikes. By increasing the overall contact area with your cycling shoe, Look has ensured these pedals bring you increased comfort and efficiency.Features: Body Material: Composite body with Stainless-Steel platform Axle Material: Oversized Chromoly (CrMo) Axle Size: Standard 9/16" thread Intended Use: Road (recreational to competition use) Pedal Stack Height: 17.3mm (including cleats) Platform Width: 60mm Contact Surface Area: 500mm² Tension: 8Nm to 12Nm adjustable spring Cleats Included: Yes, supplied with grey Look Keo Grip CleatsFloat: 4.5° grey cleats included (black 0° and red 9° cleats available separately) Distance Pedal Spindle / Crank Arm (Q Factor): 53mm Pair or Single: Pair Weight: Single Pedal: 130g; Pair with Cleats: 328gTechnologies:Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your bestImproved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliabilityBuy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:Compact dual sided SPD pedal designed for everyday use at good value price,Stable platform can be used with any type of SPD shoe and provides support for the foot,Mud repelling design is suitable for year round use,Cr-Mo spindle and low maintenance sealed bearing cartridge axle,Cleat tension adjustment,Weight: 352 grams per pair.
Look Keo 2 Max Road PedalsWith a thin body for reduced drag and wider size, the Keo 2 Max road bike pedals make your feet more stable and make the most of your power delivery. Made with a tough composite body, a plate of hard-wearing stainless-steel and a chromoly (CrMo) axle, their modern design complements the styling of today’s bikes. By increasing the overall contact area with your cycling shoe, Look has ensured these pedals bring you increased comfort and efficiency.Features: Body Material: Composite body with Stainless-Steel platform Axle Material: Oversized Chromoly (CrMo) Axle Size: Standard 9/16" thread Intended Use: Road (recreational to competition use) Pedal Stack Height: 17.3mm (including cleats) Platform Width: 60mm Contact Surface Area: 500mm² Tension: 8Nm to 12Nm adjustable spring Cleats Included: Yes, supplied with grey Look Keo Grip CleatsFloat: 4.5° grey cleats included (black 0° and red 9° cleats available separately) Distance Pedal Spindle / Crank Arm (Q Factor): 53mm Pair or Single: Pair Weight: Single Pedal: 130g; Pair with Cleats: 328gTechnologies:Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your bestImproved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliabilityBuy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 272g per pair Spindle: Forged scm435 chromoly steel Body: one piece composite Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Black Blue Red or Neon Green As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
We took our iconic V8/V12 body design and redesigned it. Lower profile larger platform and forged lightweight body make the V12 the most versatile sealed bearing at pedal around.V12 the Past Present and future of at pedal performance.100mm Long 95mm Wide [Platform] by 16mm High420g per pair
The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 2 years Weight: 286g per pair Spindle: Forged scm435 chromoly steel Body: stamped steel Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Silver/Black or Silver/Red As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in. Moulded traction pins and diamond plate area provide grip and support. Excellent mud-shedding: machined pedal body helps further prevent mud clogging. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers and Enduro bearings. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Specification Weight (per pair): 331g Spindle: Forged scm 435 chromoly steel Body: Composite Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Igus LL-glide bearing Outer bearing: Enduro cartridge bearing Cleats: premium brass cleats included Pins: Moulded traction pins Release angle: 15° or 20° Warranty: 5 years
SPD-SL road pedal for entry level use at a value for money price. Lighter spring tension optimized for beginner riders Wide pedal platform for improved foot/pedal stability Low maintenance sealed cartridge axle unit The low profile platform with open design allows for easy access and cleat adjustments Easy to clip into and release but with stable fit for maximum power transfer to the pedals Wider cleat and binding mechanism for better shoe/pedal contact than traditional SPD systems Comes with SH-SH11 shoe cleat yellow which provides 6 degree of sideways float
A unique pedal concept from MKS. The Features of the MKS Promanade Ezy Cage Pedals are:The promenade-ezy features their ezy removable pedal axle which allows the pedals to be quickly removed when the bike is not in use, making them ideal for folding bikes, bikes which must be stored in confined spaces etc.The promenade-ezy features a double-sided wide alloy platform offering plenty of foot support and typically excellent MKS bearing quality.
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 2 years,Weight: 272g per pair,Spindle: Forged scm435 chromoly steel,Body: one piece composite,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Bushing,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colours: Black, Blue, Red or Neon Green.As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
crankbrothers Candy 1 Clipless MTB PedalsReady to tear up the toughest trails, the tough and versatile Candy 1 clipless mountain bike pedals make the most of each crank rotation. Their open design sheds mud easily and with four-sided engagement, you can simply stamp your foot down to connect. Plus, the 10-degree release angle gives the ideal amount of float for position changes and easy disengagement. crankbrothers has made them from a light but tough composite that’s combined with stainless steel wings and a Chromoly (CrMo) axle, so they can withstand plenty of abuse and come back for more.Features: Body Material: One-piece CompositeAxle Material: Forged SCM435 high strength Chromoly (CrMo)Axle Size: Standard 9/16" threadSpring Material: 300 series Stainless SteelWing Material: Stamped SteelEnd Cap: SlottedBearings: Inner: Igus LL-glide bearing; Outer: Enduro cartridge bearingCleats: Premium Shimano Pedalling Dynamics (SPD) type Brass cleats with shims includedCleats Included: YesQ-Factor: 52mmRelease Angle: 10°Use: Cross Country (XC), Trail, Cyclocross (CX) and GravelRibbed body for better traction when unclippedFour-sided entry and superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSnap-on traction pad technology to customise and optimise the shoe/pedal interface (available separately)Alternative cleats available for increased release angle of 15° (sold separately)Warranty: 5 yearsWeight: 294g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.