Nukeproof Neutron EVO (Electron EVO) Flat PedalsCrafted to give you extra power on the pedals, take advantage of the enhanced grip and support from Nukeproof's Neutron EVO pedals. Adapted from their Proton flat MTB pedal, the updated pin layout and ridged traction patches keep your feet firmly in place and the nylon-composite body can handle added pressure, so you can cycle with confidence on even the toughest of terrains.Light and Tough Flat PedalsThese Nukeproof Neutron EVO (Electron EVO) Flat Pedals are lightweight with a nylon-reinforced composite body and sealed cartridge bearings. Super-tough, smooth-spinning and rock-solid underfoot, the Nukeproof Neutron Evo pedals have been designed to offer a lightweight platform that isn’t going to break the bank. The Neutron Evo pedals tip the scales at just 354g for the pair.Durable and GrippyBuilt using a nylon-reinforced composite material, the Neutron Evo uses sealed cartridge bearings to help spread the stress load from heavy impacts, while rubber lip seals between the axle end and pedal body reduce the ingress of water and dirt. Seven replaceable and adjustable alloy pins per side allow you to customise the level of grip to meet your own requirements. There are also three moulded pins on each side of the pedal for added grip.This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Nylon-reinforced composite body 7 replaceable & adjustable pins and 3 moulded pins per side Sealed cartridge bearings 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Body: Nylon-reinforced composite Axle: CrMo (Chromoly Steel) Dimensions: 98mm (w) x 95mm x 17mm Weight (per pair): 354g Built for: AM (All Moutain)/XC (Cross Country)/DH (Downhill)/FR (Free Ride) Spares available: Neutron Evo Pedal Alloy End Caps Neutron Evo Pedal Replacement Pins Pedal Bearing Kit Pedal Bushing Rubber Cap Weight: 348g (pair)Flat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR V6 Flat PedalsBased on DMR's race proven V12 flat MTB pedals, the V6 model is made from a lightweight but durable Nylon and adopts the same narrow profile and concave shaping that DMR is renowned for. Also, for simplicity and to save weight, these flat mountain bike pedals rotate on a Dual DU bush internal system rather than internal bearings. Moulded pins complete these pedal's simple, high performing and maintenance-free design.Reasons to Buy:Race-proven design.Lightweight and durable Nylon construction.Narrow profile with concave shaping.High-performing and maintenance-free.Features:Material: NylonAxle: ChromolyAxle Size: Standard 9/16"" threadBearing Type: N/A pedal use DU (dry unlubricated) bushings insteadSpare Pins Included: N/A as pins are mouldedDual DU bush systemLightweight and durable Nylon construction.Narrow profile with concave shaping.Full length off-road pinsNon-serviceable designWeight: 327g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR V6 Flat PedalsBased on DMR's race proven V12 flat MTB pedals, the V6 model is made from a lightweight but durable Nylon and adopts the same narrow profile and concave shaping that DMR is renowned for. Also, for simplicity and to save weight, these flat mountain bike pedals rotate on a Dual DU bush internal system rather than internal bearings. Moulded pins complete these pedal's simple, high performing and maintenance-free design.Reasons to Buy:Race-proven design.Lightweight and durable Nylon construction.Narrow profile with concave shaping.High-performing and maintenance-free.Features:Material: NylonAxle: ChromolyAxle Size: Standard 9/16"" threadBearing Type: N/A pedal use DU (dry unlubricated) bushings insteadSpare Pins Included: N/A as pins are mouldedDual DU bush systemLightweight and durable Nylon construction.Narrow profile with concave shaping.Full length off-road pinsNon-serviceable designWeight: 327g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR V6 Flat PedalsBased on DMR's race proven V12 flat MTB pedals, the V6 model is made from a lightweight but durable Nylon and adopts the same narrow profile and concave shaping that DMR is renowned for. Also, for simplicity and to save weight, these flat mountain bike pedals rotate on a Dual DU bush internal system rather than internal bearings. Moulded pins complete these pedal's simple, high performing and maintenance-free design.Reasons to Buy:Race-proven design.Lightweight and durable Nylon construction.Narrow profile with concave shaping.High-performing and maintenance-free.Features:Material: NylonAxle: ChromolyAxle Size: Standard 9/16"" threadBearing Type: N/A pedal use DU (dry unlubricated) bushings insteadSpare Pins Included: N/A as pins are mouldedDual DU bush systemLightweight and durable Nylon construction.Narrow profile with concave shaping.Full length off-road pinsNon-serviceable designWeight: 327g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR V6 Flat PedalsBased on DMR's race proven V12 flat MTB pedals, the V6 model is made from a lightweight but durable Nylon and adopts the same narrow profile and concave shaping that DMR is renowned for. Also, for simplicity and to save weight, these flat mountain bike pedals rotate on a Dual DU bush internal system rather than internal bearings. Moulded pins complete these pedal's simple, high performing and maintenance-free design.Reasons to Buy:Race-proven design.Lightweight and durable Nylon construction.Narrow profile with concave shaping.High-performing and maintenance-free.Features:Material: NylonAxle: ChromolyAxle Size: Standard 9/16"" threadBearing Type: N/A pedal use DU (dry unlubricated) bushings insteadSpare Pins Included: N/A as pins are mouldedDual DU bush systemLightweight and durable Nylon construction.Narrow profile with concave shaping.Full length off-road pinsNon-serviceable designWeight: 327g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR V6 Flat PedalsBased on DMR's race proven V12 flat MTB pedals, the V6 model is made from a lightweight but durable Nylon and adopts the same narrow profile and concave shaping that DMR is renowned for. Also, for simplicity and to save weight, these flat mountain bike pedals rotate on a Dual DU bush internal system rather than internal bearings. Moulded pins complete these pedal's simple, high performing and maintenance-free design.Reasons to Buy:Race-proven design.Lightweight and durable Nylon construction.Narrow profile with concave shaping.High-performing and maintenance-free.Features:Material: NylonAxle: ChromolyAxle Size: Standard 9/16"" threadBearing Type: N/A pedal use DU (dry unlubricated) bushings insteadSpare Pins Included: N/A as pins are mouldedDual DU bush systemLightweight and durable Nylon construction.Narrow profile with concave shaping.Full length off-road pinsNon-serviceable designWeight: 327g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR V6 Flat PedalsBased on DMR's race proven V12 flat MTB pedals, the V6 model is made from a lightweight but durable Nylon and adopts the same narrow profile and concave shaping that DMR is renowned for. Also, for simplicity and to save weight, these flat mountain bike pedals rotate on a Dual DU bush internal system rather than internal bearings. Moulded pins complete these pedal's simple, high performing and maintenance-free design.Reasons to Buy:Race-proven design.Lightweight and durable Nylon construction.Narrow profile with concave shaping.High-performing and maintenance-free.Features:Material: NylonAxle: ChromolyAxle Size: Standard 9/16"" threadBearing Type: N/A pedal use DU (dry unlubricated) bushings insteadSpare Pins Included: N/A as pins are mouldedDual DU bush systemLightweight and durable Nylon construction.Narrow profile with concave shaping.Full length off-road pinsNon-serviceable designWeight: 327g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR V6 Flat PedalsBased on DMR's race proven V12 flat MTB pedals, the V6 model is made from a lightweight but durable Nylon and adopts the same narrow profile and concave shaping that DMR is renowned for. Also, for simplicity and to save weight, these flat mountain bike pedals rotate on a Dual DU bush internal system rather than internal bearings. Moulded pins complete these pedal's simple, high performing and maintenance-free design.Reasons to Buy:Race-proven design.Lightweight and durable Nylon construction.Narrow profile with concave shaping.High-performing and maintenance-free.Features:Material: NylonAxle: ChromolyAxle Size: Standard 9/16"" threadBearing Type: N/A pedal use DU (dry unlubricated) bushings insteadSpare Pins Included: N/A as pins are mouldedDual DU bush systemLightweight and durable Nylon construction.Narrow profile with concave shaping.Full length off-road pinsNon-serviceable designWeight: 327g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR V6 Flat PedalsBased on DMR's race proven V12 flat MTB pedals, the V6 model is made from a lightweight but durable Nylon and adopts the same narrow profile and concave shaping that DMR is renowned for. Also, for simplicity and to save weight, these flat mountain bike pedals rotate on a Dual DU bush internal system rather than internal bearings. Moulded pins complete these pedal's simple, high performing and maintenance-free design.Reasons to Buy:Race-proven design.Lightweight and durable Nylon construction.Narrow profile with concave shaping.High-performing and maintenance-free.Features:Material: NylonAxle: ChromolyAxle Size: Standard 9/16"" threadBearing Type: N/A pedal use DU (dry unlubricated) bushings insteadSpare Pins Included: N/A as pins are mouldedDual DU bush systemLightweight and durable Nylon construction.Narrow profile with concave shaping.Full length off-road pinsNon-serviceable designWeight: 327g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
DMR V6 Flat PedalsBased on DMR's race proven V12 flat MTB pedals, the V6 model is made from a lightweight but durable Nylon and adopts the same narrow profile and concave shaping that DMR is renowned for. Also, for simplicity and to save weight, these flat mountain bike pedals rotate on a Dual DU bush internal system rather than internal bearings. Moulded pins complete these pedal's simple, high performing and maintenance-free design.Reasons to Buy:Race-proven design.Lightweight and durable Nylon construction.Narrow profile with concave shaping.High-performing and maintenance-free.Features:Material: NylonAxle: ChromolyAxle Size: Standard 9/16"" threadBearing Type: N/A pedal use DU (dry unlubricated) bushings insteadSpare Pins Included: N/A as pins are mouldedDual DU bush systemLightweight and durable Nylon construction.Narrow profile with concave shaping.Full length off-road pinsNon-serviceable designWeight: 327g (pair)Buy DMR Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Pro Sam Hill Downhill Flat PedalBringing you the perfect mix of a low weight while retaining high strength and fatigue resistance, the Sam Hill special edition Nukeproof’s Horizon Pro flat MTB pedals are award-winning and trail ready. A 3-time Enduro and 5 time Downhill World Champion, Sam Hill helped with the design of these pedals and they boast angled faces to deflect obstacles and a huge platform with adjustable pins.Strong Alloy Flat PedalsNukeproof's flagship model features all of the elements that Sam insisted they include; such as, a strong alloy body, removable and adjustable pins for full customisation, a large concave platform to provide ultimate comfort and grip with no rises, bumps or unwanted edges that can compromise the contact between shoe and pedal.Prolonged Service lifeEach pedal body spins on high quality DU bushings with 2 sealed cartridge bearings to help spread the stress loads from heavy impacts. Meanwhile a lip seal between the axle end and pedal body helps to reduce ingress of water and dirt prolonging pedal life between services. This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Material: Forged 6061-T6 Alloy body with CNC finishing Axle: 9/16” Cro-Mo 2x high-quality DU bushings & 4x sealed Z989 cartridge bearings (pair) Adjustable pin heights Weight: 430g Full range of spare parts availableFlat Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon Pro Replacement Flat Pedal PinsThese pedal pins are direct replacements for the pins found on the Horizon Pro model. The washers used for adjusting the pin height are also included with this set. Features:Compatible with Nukeproof Horizon Pro and Horizon Sam Hill pedals Replaceable Pins Adjustment washers includedBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.