From design to construction of the Candy 11, crankbrothers really have thought of everything. To reduce weight without compromising on strength, the Candy 11 is constructed from ultra-lightweight titanium components. crankbrothers' new Integrated Traction Pad technology allows customisation of the pedal interface for a more refined fit and ruthlessly efficient power transfer. The float and release angle are customisable, to suit your individual needs. For improved traction when unclipped, the pedal body is ribbed. A hex alloy endcap and bashguard, together with chamfered edges provide protection from rock strikes. Premium bearings and a double seal system make the Candy 11 a durable pedal. With the excellent build quality, comes a 5 year crankbrothers warranty.
Excellent mud-shedding: machined pedal body helps further prevent mud clogging. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately . Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.
Performance The concave pedal platform of this model offers a more secure foothold. Like its downhill (DH) equivalent, you get that flat pedal feel whilst running clipless. They're 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design of the crankbrothers Mallet E also provides excellent mud shedding. Plus, they also boast 4-sided entry, meaning you can clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal. Fit Increased float: 6° of side-to-side rotational play. The float of crankbrothers Mallet E Pedals allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Durability The outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Maintenance Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit. Additional Information: Warranty: 5 years
To create the ideal shape and grip pattern/placement, the outsole profiles of the top mountain bike (MTB) shoe brands were analysed and the data was used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43. Once the optimal sizes had been established, the features required for crankbrothers Stamp 7 Pedals were also incorporated.
Mallet DH are the pedal of choice by most Pro World Cup riders.
The design for the original crank brothers pedal began out of frustration. The founders of crank brothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. A word on maintenance In order to keep your crank brothers pedals running smoothly, they recommend the following: clean pedals every 30 hours of riding remove the pedal body from the spindle and wipe it clean of any dirty grease apply fresh grease to the inside of the pedal before re-installing the spindle Pedal features: Excellent mud-shedding: the design is very open 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the Extremely lightweight: pedal design is very simple with only a few key parts Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rid Fit adjustment: crank brothers premium cleats can be adjusted for 10° release Customise the fit between your shoe and the pedal by using tread contact sleeves Crank brothers pedals are fully re-buildable for simple maintenance. There is a consistency in part When servicing this pedal, use the rebuild kit designed for level 1 & 2 pedals
Compatible with: all eggbeaters, candys, mallets, 5050s model years 2010-present
These cleats are designed to be used with the Eggbeater, Candy and Quattro pedals and with shoes that have the standard road 3-hole bolt pattern.
Spinning on a CrMo axle, a reliable and strong engagement to your cranks is assured, while the ribbed body section enhances traction for a better grip to your sole. Coming with brass cleats and shims, these hard-riding pedals come with eight optimally-placed pins, letting you ride with controlled aggression whether clipped in or not. Designed with a 15-20 degree release angle, cleat entry and removal is comfortably simple, allowing you to focus on a truly fearless flight to the finish.
Designed with a four-sided entry system, this professional level, titanium-made pairing gives a sturdy and secure performance, with their self-cleaning construction making sure mud and moisture build-up are kept at bay. Coming complete with brass cleats and mounting hardware, this hard-wearing pedal set is ideal for the rowdy mountain marauder.
These stunning pedals show off 9 hex traction pins per side for unrivalled grip and support when riding down the most challenging off-road runs. Their premium bearings feature a seal system for a smooth rotation and efficient pedal stroke performance. Enjoy fast and reliable acceleration as you weave your way from trail to trail.