Combining a carbon body with a titanium axle, each of these cleat-ready pedals provide a sturdy base for heavy-duty, varied terrain riding. Built to resist impact from rocks and dirt thrown up from the trail floor, these lightweight and smooth-spinning platforms have a specially designed shape and build to ensure the best power-to-weight ratio possible. Suited to the rigours of XC racing, this is the perfect pair for fast-paced and thrilling riding.
Set Contains: 16 x short pins (for use in the centre section of your pedals) overall length 8.5mm, thread is M4x0.7x4, strud is 4.5mm using either a 5mm spanner or 2mm allen wrench to secure. 28 x long pins (for use in the outside edge of your pedals) overall length 12.5mm, thread is M4x0.7x8, strud is 4.5mm using either a 5mm spanner or 2mm allen wrench to secure. 2mm allen wrench included
Look has optimised the pedal shape and size to obtain the perfect balance between the contact surface area and weight. This pedal features an exceptionally, modern and performance orientated design that provides superb comfort and as it is equipped with advanced weather seals; it is extremely durable and reliable. To expand this pedal design usage further, it has fully adjustable cleat tension, enabling you to fine-tune the contact and release feel and to set them up to suit how you like to ride.
Look has optimised the pedal shape and size to obtain the perfect balance between the contact surface area and weight. This pedal features an exceptional, modern and performance-orientated design that provides superb comfort and as it is equipped with advanced weather seals; it is extremely durable and reliable. To expand the usage of the Look X-Track pedals further, they have fully adjustable cleat tension, enabling you to fine-tune the contact and release feel and to set them up to suit how you like to ride. Please Note: These pedals come with Look SPD-style cleats to install onto your SPD-compatible cycling shoes. However, if you wish to use them with shoes that have Shimano SPD cleats installed they will be compatible with these too.
Whether you're riding for the fun of it or pushing for the top spot on the podium, the Look Keo 2 Max Carbon pedals give you the best of both worlds with a slim profile and incredible support from the large contact area that translates into superior comfort and maximum power transfer. Technologies: Optimised Surface Contact: The Look Keo 2 Max Carbon pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max Carbon pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max Carbon pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability. Alternative Cleat Float Options: Black Cleats: 0 degrees; Red Cleats: 9 degrees (both alternative versions sold separately)
With a rubber grip, splined centre, and 285mm in length, the Pro Pedal Wrench is the idea tool for changing pedals.
Simple to use, it is possible to adjustment the cleat entry/release tension to low for an easy clip out. Its large and wide contact surface provides excellent pedalling stability. The Kéo Classic 3 spindle is made up of an oversized steel axle with miniature ball bearings (12 mm inside x 18 mm outside) and a needle bearing cartridge for improved wear resistance. A spacer is used to hold the needle bearing cartridge in place. LOOK spindles are only approved after a rotational test of 2 million cycles at 100tr/min with a load of 90kg on the centre of the pedal and an eccentric rotation (creating a shock on each rotation). This test is far more gruelling to the current industry standard, the EN14781. The new classic two has 400 mm² surface area which is almost 40% more than the competition. The significance of this is the load is spread around the cleat rather than having a small concentrated area, which improves comfort and reduced foot discomfort.
LifeLine offer a comprehesive range of bicycle tools with built-in quality and great value prices. Whatever mechanical job is looming be it maintenance or a rebuild, LifeLine have the equipment you need.
Classic, plated buckles provide a quality finish. Straps are supplied with instructions and include a full fitting kit with washers and screws. Buckles should be worn on the outside of the pedal. Restrap horizontal pedal straps provide remarkable strength and comfort. Made from tough nylon webbing, the straps are fully adjustable to suit all riders. Their unique 3-layer Velcro system holds your foot firmly in place for fast, tough cycling. No fittings required. Just fasten and go. Our straps can be worn with any footwear. Perfect for urban riding, bikepacking and touring.
The oversized, asymmetrical head on the Park Tool pedal wrench is made from investment cast Cro-Moly steel for superior strength and durability. While strong, the PW-4 is thin enough to access all wrench flats. The handle is round and vinyl-dipped so it won't dig into the hand like flat wrenches. Its two 15mm wrench openings are oriented at 30 degrees and 45-degree angles so the user can always achieve the best mechanical advantage, regardless of the pedal position.
Using our previous experience in this field we produced a brand new proprietary buckle design which can withhold the fiercest pressure, whether it be that of a track acceleration or a sudden skid. Longevity and security is assured by the polylaminate layer between the leather which impedes stretching.