When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
When fitting cleats to your shoes its crucial that they are set in the right position as they play a big part in your riding performance. As the main point of energy transfer its critical that they are set up correctly because if they are not power and performance will be lost as well as riding comfort being compromised which could result in injury for the rider.Most riders when fitting new cleats will spend time measuring and fine-tuning to get the cleats directly under the balls of the feet, and then go on a test ride, fine-tune, and pedal some more to find the optimum angle for the cleats, which can all add up to a lot of time. Even when you think you have the cleat in the correct position, a lot of the time it is in fact not set up correctly although this is hard to notice and is sometimes only spotted by someone who is watching your pedal motion. Luckily thanks to Ergon, fitting new cleats is now simple, precise and quick. The TP1 pedal cleat tool allows for the accurate adjustment of the three axis which are the most important when installing cleats. Fore/aft adjustment, adjusting the Q-Factor and adjusting the cleat angle. Available for a range of pedals including SPD, SPD-SL, KEO, Crank Bros and Speedplay you can be guaranteed that once you have used the TP1 pedal cleat tool you will be pedaling as efficiently as possible.
The Lezyne Pedal Rod has been designed for ease of use, with two 15mm offset wrench openings for optimal leverage. The tool head is made of a stamped, CNC-machined heat treated steel plate with an integrated bottle opener. Ergonomic wooden handle for comfortable use.
The Lezyne Stainless Pedal Hook is a modern, industrial 3-piece pedal-hook bicycle storage system constructed from a durable, corrosion-resistant stainless steel. This includes a stylish wall-mounted pedal hook and tyre plates to prevent scuffing. A one-time installation allows for simple, space-saving bicycle storage for rooms, garages, or wherever you prefer to stash your bike. It s compatible with all standard pedals and can hold bicycles weighing up to 70 LBS (32 KGS). Mounting hardware and wall plugs are included.3-piece pedal-hook bicycle storage systemCorrosion-resistant stainless steelOne-time installationCompatible with all standard pedalsCan hold bicycles weighing up to 70 LBS (32 KGS)Mounting hardware and wall plugs are includedWeight: 468 grams
Using the same IP54 rated waterproof construction as the best selling Shield panniers, the Shield handlebar bag is a dependable partner for long days out.With a 10 litre capacity, the bag features a transparent outer pocket for your map or phone and easy access mesh outer pockets for snacks, etc. It also features reflective details and an integrated light clip for visibility. The bag comes with a standard and a 31.8mm oversized bar mount.IP54 Rated Waterproof ConstructionComes With Standard & 31.8mm Oversized Bar Mount (handlebar mount 100084)Transparent Outer PocketReflective DetailIntegrated Light ClipCovered By Thule's Usual 5 Year WarrantyWeight: 600gDimensions: 28.5 x 18 x 20.30cm
Whether you're riding for the joy of it or pushing for the top spot on the podium, you get the best of both worlds with a slim profile and incredible support from the large contact area that translates into superior comfort and maximum power transfer. Technologies: Optimised Surface Contact: The Look Keo 2 Max pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product. The contact surface of these revised Keo 2 Max pedals preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal. Look also sought to optimise power transfer thanks to its larger 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance. Increasing the pedal’s usable contact surface, without any additional weight gain, improves the power to weight ratio, making the product even better and allowing you to perform at your best. Improved Spindle Profile: The spindle profile of the Keo 2 Max pedals has also been optimised. Built around an oversized CrMo+ steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally. A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play. The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.
Based around the world renowned SPD technology we have engineered the most adaptable caged-clip system on the market. The DMR V-Twin mtb clipless pedal offers a huge number of different grip and feel options. Using our range of pins paired with a unique Nylon “bumper” and Metal Shim feature, the pedal can be customised to optimise your float and preferences and improve your ride experience.
Look has optimised the pedal shape and size to obtain the perfect balance between the contact surface area and weight. This pedal features an exceptionally, modern and performance orientated design that provides superb comfort and as it is equipped with advanced weather seals; it is extremely durable and reliable. To expand this pedal design usage further, it has fully adjustable cleat tension, enabling you to fine-tune the contact and release feel and to set them up to suit how you like to ride.
Durably designed and comprising of a forged aluminium body and CrMo + spindle, these strong pedals are well weighted, happily reducing your efforts as you make your way through every trail and over every terrain. Equipped with a superbly efficient cleat engagement system, you can ride with confidence and composure as you search for your next Enduro-based adrenaline hit. With a wide platform to aid balance and manoeuvrability, these pedals more than meet the demands of the modern thrill seeker.