Refresh your Crank Brothers pedals with premium internal components. Compatible with Crank Brothers Eggbeater, Candy, Mallet & 50/50 pedals from 2010 onwards. Use this kit to upgrade your current pedals to new specifications or refresh their current internals. The kit includes fresh internals for a pair of pedals.Rebuild kit for Crank Brothers Eggbeater, Candy, Mallet & 50/50 pedals from 2010 onwards - does not fit Crank Brothers Stamp Pedals2 enduro cartridge bearings2 Igus II-Glide bearings2 double seal systems2 hex alloy end capsO-rings2 axle nuts and bearing removal tool
The classic DMR V8 pedal has been re-invented with this new and updated model. Building on the lower profile and larger platform design of the now legendary Vault and V12 pedals, the new DMR V8 features a much lower profile than its predecessor, while the platform area is larger than before for increased grip and feel on the pedal. Adding to this are tuneable pins that be set for your preferred height for perfect feel and grip levels.Constructed from die cast aluminium the pedals are lightweight at just 480g per pair while the heavy duty Cro Mo Steel axles ensure these pedals can take a pounding. Simplicity and reliability have long been key words where DMR pedals are concerned and the new V8 features the same dual DU bush system that is easily user serviceable, meaning these are pedals that are going to go the distance. Strong, reliable, bang up to date and fantastic value, the new DMR V8 is the perfect choice for those looking for a fantastic pedal without breaking the bank. New and improved version of the classic DMR V8 pedalLarger, lower profile platform area480g per pairServiceable dual DU bush system10 pins per side Can be tuned for heightHeavy duty 4130 CroMo steel axlesCast aluminium body
The Park Tool HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).Use for both pedal removal/installation and for cassette removalChain whip features improved compatibility with 5 speed to 12 speed mountain and road bike cassettes and freewheelsThe HCW-16.3 is 10.75" long (27.3cm)
The DMR Flip Pins for Vault Pedals come with 2 varieties. 16 x short pins (for use in the centre section of your pedals) overall length 8.5mm, thread is M4x0.7x4, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. 28 x long pins (for use in the outside edge of your pedals) overall length 12.5mm, thread is M4x0.7x8, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. There's also a 2mm allen wrench included.
The V12 has been an iconic pedal, scratch that, legendary pedal since it was first launched 18 years ago but now it has been freshened up for the first time. There wasn't anything wrong with the old style V12 pedal but DMR felt it was time to give the old workhorse a slight makeover. These new V12's feature a 10 percent wider platform which enables better grip for your foot and allows you to take bigger hits than ever before. The pedal has been made slightly thinner and is now just 16mm deep whilst still maintaining the V12's much loved concave shape. All this stacks up to bring this pedal bang up to date and as they now weigh it at under 430g these pedals are ready for all styles of riding.
The DMR Flip Pins for Vault Pedals come with 2 varieties. 16 x short pins (for use in the centre section of your pedals) overall length 8.5mm, thread is M4x0.7x4, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. 28 x long pins (for use in the outside edge of your pedals) overall length 12.5mm, thread is M4x0.7x8, strud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure. There's also a 2mm allen wrench included.
The classic DMR V8 pedal has been re-invented with this new and updated model. Building on the lower profile and larger platform design of the now legendary Vault and V12 pedals, the new DMR V8 features a much lower profile than its predecessor, while the platform area is larger than before for increased grip and feel on the pedal. Adding to this are tuneable pins that be set for your preferred height for perfect feel and grip levels.Constructed from die cast aluminium the pedals are lightweight at just 480g per pair while the heavy duty Cro Mo Steel axles ensure these pedals can take a pounding. Simplicity and reliability have long been key words where DMR pedals are concerned and the new V8 features the same dual DU bush system that is easily user serviceable, meaning these are pedals that are going to go the distance. Strong, reliable, bang up to date and fantastic value, the new DMR V8 is the perfect choice for those looking for a fantastic pedal without breaking the bank. New and improved version of the classic DMR V8 pedalLarger, lower profile platform area480g per pairServiceable dual DU bush system10 pins per side Can be tuned for heightHeavy duty 4130 CroMo steel axlesCast aluminium body
Crank Brothers new Stamp 2 pedal takes their individual style and forms it perfectly into a thin, crisply designed flat pedal that is uniquely available in two sizes, depending on which size shoe you shred in. Lightweight and tough forged aluminium body with 10 grippy pins per side & forged chromoly steel axleIgus LL-Glide and Enduro cartridge bearings are extremely durable5 Year warranty gives you piece of mindLightweight at just 439g per pair (small size)Small suitable for 32-43 EU shoes (100x100mm Platform)Large Suitable for 43-49 EU shoes (114x111mm Platform)With a low profile 16mm thin platform and 10 pins per side, the Stamp 2 provides an optimal interface between shoe and pedal, helping to drop your centre of gravity while also offering improved clearance in rocky terrain. Featuring Crank Brothers latest Igus/Enduro bearings and forged Chromoly steel axle, these pedals are built to laugh in the face of adverse weather conditions and are backed up with Crank Brothers 5 Year Warranty. Lightweight, durable and with killer looks and superb quality, the Crank Brothers Stamp 2 is perfect for riders who want a great value and durable aluminium flat pedal!
The Eggbeater is Crank Brothers original product and what started it all off. Simple, reliable and effective, the Eggbeater 1 is the latest incarnation of this legendary pedal.Unique design sheds mud with ease, making entry and release easierPremium brass cleats includedcleats can be reversed to alter release angle from 15 to 20 degreesStamped steel construction is highly durable2 Year warrantyThe Eggbeater 1 is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. As with the rest of the Crank Brothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The PRO Pedal Spanner is a versatile pedal wrench with an offset 15mm open end for easy pedal removal and installation. It has been heat treated for added durability and has a rubberised handle for a comfortable grip.Heat treated tools for increased durabilityOffset 15 mm open ended spanner gives easier access to pedals for added safetyRubberised handle for comfortable grip
The F20 is a truly stunning piece of machining from the team up in Barnoldswick and is constructed from 2014 T6 aluminium alloy which is fully CNC machined to create a great platform with an anodised finish in a choice of all 6 trademark Hope colours. Replaceable Hollow pins offer amazing gripAxle is high strength Cr-Mo, heat treated and platedPedal platform is CNC machined with a slight concave for stabilityPedals run on three cartridge bearings and a norglide bush for smooth long-term durabilityAvailable in Hope's 6 standard coloursWeight: Only 390g per pairThe axle is constructed out of high strength Cr-Mo which has been heat treated and plated for added strength. The platform of the pedal is slightly concave and is supported by one Norglide bush and 3 cartridge bearings in a fully sealed chamber to ensure a long lasting and maintenance free running as well as being boosted with 20 replaceable pins on each pedal which give awesome traction and grip.
The F20 is a truly stunning piece of machining from the team up in Barnoldswick and is constructed from 2014 T6 aluminium alloy which is fully CNC machined to create a great platform with an anodised finish in a choice of all 6 trademark Hope colours. Replaceable Hollow pins offer amazing gripAxle is high strength Cr-Mo, heat treated and platedPedal platform is CNC machined with a slight concave for stabilityPedals run on three cartridge bearings and a norglide bush for smooth long-term durabilityAvailable in Hope's 6 standard coloursWeight: Only 390g per pairThe axle is constructed out of high strength Cr-Mo which has been heat treated and plated for added strength. The platform of the pedal is slightly concave and is supported by one Norglide bush and 3 cartridge bearings in a fully sealed chamber to ensure a long lasting and maintenance free running as well as being boosted with 20 replaceable pins on each pedal which give awesome traction and grip.