Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Union GC PedalsComing equipped with a fully CNC-machined pedal body construction for maximum strength and durability, these downhill (DH) orientated pedals are engineered for powering you through the roughest of terrain conditions. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you.Downhill Clip-In Pedals with Large Platform SizePerfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Features: Pedal Body Material: Fully CNC-machined Clips and Cleats Material: Stainless Steel Axle Material: Heat-treated and plated Chromoly (Cr-Mo) Steel Use: Downhill (DH) Dual sided Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release Replaceable pins for increased grip on Union GC (14 pins) Footplate option on pedal for maximum shoe/pedal contact Large shoe/pedal contact area for maximum power transfer and stability Pedals supplied with two cleats optionsTechnologies: Fully serviceable and re-buildable. Titanium axle upgrades are available separately. Q-Factor - 55mm. Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability.Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS SilverBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Mallet E PedalsDesigned with Enduro racing in mind, the Mallet E Pedals from crankbrothers feature a unique concave platform that gives you a stable and secure foothold for optimum control when tackling tough trails. PerformanceThe concave pedal platform offers a more secure foothold. Like it's Downhill (DH) equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. The ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.FitIncreased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately.Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.DurabilityOuter enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.MaintenanceCrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessPins: 12 pins per pedalSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyCleat: Premium brass cleats with shims includedWeight: 419g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Mallet E PedalsDesigned with Enduro racing in mind, the Mallet E Pedals from crankbrothers feature a unique concave platform that gives you a stable and secure foothold for optimum control when tackling tough trails. PerformanceThe concave pedal platform offers a more secure foothold. Like it's Downhill (DH) equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. The ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.FitIncreased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately.Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.DurabilityOuter enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.MaintenanceCrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessPins: 12 pins per pedalSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyCleat: Premium brass cleats with shims includedWeight: 419g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Mallet E LS PedalsDesigned for enduro riding, the Mallet E LS Pedals from crankbrothers will give you the extra edge. Featuring longer spindles for enhanced control and optimised clearance, they're equipped with 6 adjustable pins per side, traction pads, and a ribbed body, guaranteeing a slip-free and stable platform. They feature a four-sided easy engagement system, so you can just stamp down and go and also benefit from sealed cartridge bearings for excellent durability that's ready for whatever challenge you meet on the trail.PerformanceThe concave pedal platform offers a more secure foothold. Like it's DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.FitIncreased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.DurabilityOuter enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.MaintenanceCrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features: 6 adjustable pins per side for grip 4-sided entry Superior mud-shedding capabilities Chamfered edges to reduce rock-strikes Premium bearings and double seal system Cleat Type: Premium brass cleats with shimsCleat Included: YesBody Material: 6061-T6 Aluminium/Composite Spindle Material: Scandium 435 Chromoly (CrMo) Wing Material: 17-4PH Stainless Steel Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Release angle: 15°/20° (customisable)Q-Factor: 57mm Weight: 424g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Engineered for powering you through the roughest of terrain conditions, these DH-orientated pedals are equipped with a fully CNC-machined pedal body construction for maximum strength and durability. Hope has also kitted these out with stainless steel clips and cleats for a strong and secure hold as you charge down the trails. Another benefit is they feature heat-treated and plated chromoly (Cr-Mo) steel axles, making them robust and reliable wherever your next ride takes you. Downhill Clip-In Pedals with Large Platform Size Perfectly suited for the demands of modern downhill mountain bike riding, these pedals boast large platform size with a dual-sided mechanism that's designed for easy pedal entry, secure cleat holding and positive, consistent release functionality. They also have a footplate option on each pedal for maximum shoe/pedal contact. Focusing on increased grip, these have seven replaceable pins per side, which allows you to enjoy excellent stability and control. One final highlight is they run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability. Technologies: - Fully serviceable and re-buildable - Titanium axle upgrades are available separately - Q-Factor – 55mm - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. - Large platform with the option of 7 pins per side or footplates to give maximum contact between the shoe and pedal and to provide the greatest stability. - Pedals run on three cartridge bearings and a maintenance-free IGUS bush for smooth long-term durability. Manufacturer's Part Numbers: PDUGCB Blue PDUGCC Orange PDUGCN Black PDUGCPU Purple PDUGCR Red PDUGCS Silver
Performance The concave pedal platform of this model offers a more secure foothold. Like its downhill (DH) equivalent, you get that flat pedal feel whilst running clipless. They're 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design of the crankbrothers Mallet E also provides excellent mud shedding. Plus, they also boast 4-sided entry, meaning you can clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal. Fit Increased float: 6° of side-to-side rotational play. The float of crankbrothers Mallet E Pedals allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Durability The outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Maintenance Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit. Additional Information: Warranty: 5 years
High performance trail-conqueror. All new Tallac combines advanced off-road footwear technology with bike-specific performance to offer a trail flat shoe that's designed to outlast the biggest epics. Tallac BOA® uses the BOA® Fit System for a fast effortless and precise fit with strong flexible and low-friction textile TX4 Laces. The Cordura® upper is breathable and lightweight but also trail-tough and protective with a stitch-free and fully welded construction. The new adaptable outsole has a supportive pedal contact area featuring our MAX GRIP rubber for a confident connection with the pedal when charging the trail ahead. Compliant reverse hex traction in the toe and heel make easier work when hiking becomes necessary. FEATURES MAX GRIP rubber outsole. Hexagon outsole featuring reverse hex traction pattern on toe and heel for hike able climbs and descents. D3O® High Impact Zone Technology insole absorbs impact and reduces fatigue. BOA® Fit System with flexible low-friction textile TX4 Laces expertly configured for performance. Hook and loop strap for additional forefoot adjustment. Lightweight bonded upper featuring Cordura® mesh for durability and breathability. Anti-bacterial mesh lining controls odor. TPU mud guard to protect against dirt debris and rubbing. TPU toe and heel protection with reinforced anti-abrasion film. Fully gusseted tongue prohibits intake of dirt and debris. EVA midsole for extra cushion and support. Heel pull tab for easy entry.
High performance trail-conqueror. All new Flume combines advanced off-road footwear technology with bike-specific performance to offer a trail flat shoe that's designed to outlast the biggest epics. Flume BOA® uses the BOA® Fit System for a fast effortless and precise fit with strong flexible and low-friction textile TX4 Laces. The Cordura® upper is breathable and lightweight but also trail-tough and protective with a stitch-free and fully welded construction. The new adaptable outsole has a supportive pedal contact area featuring our MAX GRIP rubber for a confident connection with the pedal when charging the trail ahead. Compliant reverse hex traction in the toe and heel make easier work when hiking becomes necessary. FEATURES MAX GRIP rubber outsole. Hexagon outsole featuring reverse hex traction pattern on toe and heel for hike able climbs and descents. D3O® High Impact Zone Technology insole absorbs impact and reduces fatigue. BOA® Fit System with flexible low-friction textile TX4 Laces expertly configured for performance. Hook and loop strap for additional forefoot adjustment. Lightweight bonded upper featuring Cordura® mesh for durability and breathability. Anti-bacterial mesh lining controls odor. TPU mud guard to protect against dirt debris and rubbing. TPU toe and heel protection with reinforced anti-abrasion film. Fully gusseted tongue prohibits intake of dirt and debris. EVA midsole for extra cushion and support. Heel pull tab for easy entry.
The ultimate pedal for enduro racing and riding. The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features. There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped Chamfered edges for reduction in rock strikes Excellent mud-shedding: the design is very open. 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Specification Weight (per pair): 419g Spindle: Forged scm 435 chromoly steel Body: 6061-T6 aluminium Wings: 17-4PH stainless Spring: 300 series stainless steel Inner bearing: Igus LL-glide bearing Outer bearing: Enduro cartridge bearing Pins: 12 pins per pedal Cleats: Premium brass cleats included Release angle: 15° or 20° Warranty: 5 years
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers Carl and Frank were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated…. It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes. There is an ongoing debate amongst many riders about which is best candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab jump off the bike or quickly get clipped in again and put the power down. Excellent mud-shedding: the design is very open. Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Chamfered edges help reduce rock strikes Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). candy 7 Weight (per pair) 320g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
The ultimate pedal for enduro racing and riding.The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features. There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Available in black or blue colour options with the standard 52mm axle or half black / half blue with the longer 57mm axle. Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped Chamfered edges for reduction in rock strikes Excellent mud-shedding: the design is very open. 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Mallet E Weight (per pair) 419g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Pins 12 pins per pedal Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years