Contact points - those spots where our bodies meet our bikes - are crucial areas for comfort and control. Get it wrong and even the best bikes can be miserable to ride. We developed the new Terra handlebar to be the paragon of comfort control and performance with an optimized blend of carbon fiber and advanced construction techniques yielding exceptional ride comfort precise handling and class-leading strength at an impressively low weight. A shallow drop and moderate reach combine with a 12-degree flare for optimal all-terrain comfort and control. Optimized blend of high modulus carbon fiber materials and advanced construction techniques yield a light and confident bar. Ergonomic top perch alleviates pressure on the hands. Bar flared at the drops for added stability - 12 degrees. Bar Width (center-to-center) 38/40/42/44cm. Bend : 103mm drop x 70mm reach.
A high performance bar ideal for smaller hands or for riders that spend the majority of their time climbing. An ergonomic top perch with smooth transitions alleviate pressure on hands and greatly improve comfort. FACT carbon construction offers an optimized blend of durability and light weight. Ergonomic top perch alleviates pressure on hands. Shallow bend drop design. UCI legal compatible with Shimano SRAM and Campagnolo controls. Front of bar optimized for dual-cable routing. Weight: 200g (42cm) Clamp Diameter: Oversized 31.8mm Bar Width (centre-to-centre): 36/38/40/42/44cm Shallow Bend Drop: 123mm drop x 75mm reach
Wind is the ultimate cruelty and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing we designed the Rapide bar to cut through the wind with knife edge efficiency and at the same time provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip even when wet there’s a recessed step that sets the bar wrap flush with the tops the airfoil is offset forward to offer greater forearm and knee clearance and at 225 grams the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge. Aerodynamically engineered to save 20+ seconds over 40km vs a round bar. Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at 225g (size 42cm). Innovative features like textured tops and a smooth bar tape step enhance your experience. Bar Width (center-to-center) 38/40/42/44cm. Bend: 125mm drop x 75mm reach.
With the same ergonomic benefits as the S-Works version the Expert Shallow delivers a strong and affordable bar with no compromise. 2015 premium butted aluminium high-strength design. Ergonomic top perch alleviates pressure on hands smooth transitions for fit and comfort. Shallow bend drop design. UCI legal compatible with Shimano SRAM and Campagnolo controls. Front of bar optimized for dual-cable routing. Clamp Diameter: Oversized 31.8mm Bar Width (centre-to-centre): 40/42/44cm Shallow Bend Drop: 123mm drop x 75mm reach
The S-Works Carbon Mini Rise handlebars blend the durability of DH bars with an XC race weight and this makes one of the lightest most versatile pairs of carbon trail handlebars on the market. They also feature a 760-millimeter width with cut marks that make it easy to find the right width for however you like to ride. SL FACT high-strength carbon construction offers an optimized blend of high durability and light weight. Clamp diameter: 31.8mm Rise: Mini rise (0.4” / 10mm) Width: 760mm includes cut marks to customize width Sweep: 6-degree upsweep; 8-degree backsweep Finish: Unidirectional satin carbon.
As their name implies the Short Reach handlebars are designed for those that require a shorter reach in order to obtain the optimal bike fit. Along these lines they feature a 65mm reach (which is about 10 to 15mm shorter than 'average') and a shallow 125mm drop. This also comes with the added benefit of increased control at the hoods and levers. And for the construction we selected a lightweight yet highly durable 6061 Premium Butted Aluminum that's sure to stand up to years of hard riding. 6062 premium butted aluminum high-strength design. Short reach for optimal brake/shift control. Shallow Bend Drop: 125mm drop x 65mm reach
The Contact SL Road Drop Handlebar is a very lightweight 7050 aluminium bar with dual radius drop and a contoured top profile for increased control and comfort. Clip-on compatible. FEATURES Material: Optimized 7050 aluminum Weight: 285g (420mm) Reach & Drop (measured centre to centre) 360mm bars = 68mm reach 120mm drop 380mm bars = 68mm reach 120mm drop 400mm bars = 72mm reach 125mm drop 420mm bars = 72mm reach 125mm drop 440mm bars = 72mm reach 125mm drop
DH tough and XC light the Traverse SL 35 is our handlebar premiere and capitalizes on our decades of carbon fiber experience to deliver precise control and exceptional comfort along with class leading strength to weight performance. Handlebars have grown wider in recent years and this has presented some interesting challenges. Because bars are wider leverage stress exerted at the stem has risen dramatically. The Traverse SL features a 35mm diameter at the stem clamp; this increases strength in this crucial zone while also dissipating the bar clamp load across a larger surface area. More secure clamping and a stronger handlebar - these are good things. Meanwhile our extensive experience with carbon fiber allows us to ensure maximum strength at the clamp and then tailor the carbon fiber layup to providing damping at the bar-ends resulting in a more comfortable less fatiguing ride. The Traverse SL 35 is strong enough to attack the gnarliest terrain durable and comfortable enough to hammer the chunder day in day out and light enough to make XC racers smile. Width: 800mm Clamp: 35mm Rise: 30mm Upsweep: 6 degrees Backsweep: 8 degrees Weight: 227 grams
The Ride Wide Alloy Enduro Handlebars are the original and best wide bar. It’s the little difference’s that make it one of the most comfortable bars in its class. The backsweep and upsweep help the bar to the ultimate feel once tried always loved. As used by the Santa Cruz Syndicate riders Greg Minnaar Loris Vergier and Luca Shaw. Finish your cockpit in style and add the bars to a Enduro stem Mk2 or Mk3 stem. Dirt 100 2018 “HIT THE SPOT IN TERMS OF FIT AND FEEL” Colour: Black 800mm wide Available in 35mm / 31.8mmm bar clamp Available in 15mm / 30mm rise 9 degree backsweep 5 degree upsweep Suggested cut down marks Weight 300g Here is what IMB magazine had to say about our alloy enduro handlebars. 'With a 35mm clamp the Ride Wide Alloy Enduro Handlebars are stiff and as such give a direct feel. This kind of stiffness is ideal on a big burly bike with plenty of travel but those on shorter travel bikes or hardtails may appreciate the thinner 31.8mm bars which are also available. Strapped onto a long travel ebike these definitely felt like the ideal bar and stem combo for such duties and hold a line through rough terrain was markedly easier with the Burgtec set up. If you're planning on some wild riding then this kind of stiff setup can pay dividends. The classic back sweep will appeal to many riders and is very comfortable with options to keep most happy. This package easily adds some style performance and engineering class to any bike.'
Burgtec's first range of signature handlebars developed with yes you've guessed it! Josh Bryceland. Josh loved the sweep and rise of the Ride Wide Bars but asked us to make him something a bit higher. The Rat isn’t one of those guys that’s ‘crazy’ on setup but he knows what he wants. 38MM RISE: Back in 2018 Josh’s idea was for something more versatile that he could use on all his bikes. After testing various prototypes he finally narrowed it down to a 38mm rise bar the perfect sweet spot. The first material thought was Carbon but after getting to ride various Alloy prototypes he just got more comfortable on Alloy. So the 38mm “Ride High” was born. The same unsurpassed comfort and durability as all of the Ride Wide range but just a little Higher. The Rats set up is full 800mm in case you’re wondering! Width: 800mmRise: 38mmAvailable in 35mm clamp only.Backsweep: 9 °Upsweep: 5°Weight: 346g 50MM RISE: Back in 2018 Josh’s idea was for something more versatile that he could use on all his bikes. After testing various prototypes he finally narrowed it down to a 50mm rise bar the perfect sweet spot. The first material thought was Carbon but after getting to ride various Alloy prototypes he just got more comfortable on Alloy. So the 50mm “Ride High” was born. The same unsurpassed comfort and durability as all of the Ride Wide range but just a little Higher. The Rats set up is full 800mm in case you’re wondering! Width: 800mmRise: 50mmAvailable in 35mm clamp only.Backsweep: 9 °Upsweep: 5°Weight: 346g
In terms of both comfort and performance anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Alloy Handlebars to excel on both fronts. Starting with the construction they're made from our Premium Butted Aluminium for a nice overall weight and high rigidity. And for comfort much of it boils down to fit. Along these lines they feature a shallow drop & bend that's extremely comfortable while they also have a 15mm rise to help accommodate a wide fit range. For added stability we've added 12 degrees of flare at the drop to give that wide stance. Constructed from 6061 Butted Aluminium for a high-strength design. 15mm rise provides a wider range of fit. Shallow Bend Drop: 103mm drop x 70mm reach x 12d flare
Following the success of the Ride Wide Carbon DH bar we've introduced the Ride Wide Carbon Enduro Handlebars. Bars are tricky things they either feel right or wrong and the Ride Wide Carbon Enduro Handlebars definitely feel right. Our classic sweep and rise make you feel in total control of your bike even on the most hairy single track... Plus we’ve shaved some weight off the DH bar to keep your Enduro bike nice and light. As used by Josh Bryceland in the Enduro World Series Finish your cockpit in style and add the bars to a Enduro stem Mk2 stem. Dirt 100 2018 'HIT THE SPOT IN TERMS OF FIT AND FEEL' 800mm Wide UD Carbon 35mm Bar Clamp 20mm/30mm Rise 9º Backsweep 5º Upsweep Weight 247g BUILT TO TAKE SOME BEATING Here is what Pinkbike had to say about our handlebars. 'While it will always come down to personal choice how wide you want to space out your hands on your handlebar Burgtec's 800mm wide enduro-specific Ride Wide Carbon Handlebars unquestionably offer a no-nonsense setup that gives you the option of going that route. With a 35mm diameter and a balanced strength-to-weight ratio that is designed to not compromise its durability. The Ride Wide Carbon Enduro Bar is very stiff with only a limited amount of vibration damping capabilities delivering very precise and direct steering. Together with the short Enduro MK2 Stem it's a cockpit setup that undeniably allows you to go faster with confidence.'