Customize your e*thirteen handlebars with coloured decals. Will Fit Base, Plus & Race 20mm, 35mm Bars Included:x2 Coloured Handlebar Decals, x2 Small Logo, x1 Medium Logo and x1 Large Logo StickerSize: 80mm x 15mm
Key Features:Light enough? Think again.,The ultimate full carbon monocoque aero handlebar, as used by the pro peloton, just got lighter,The new VIBE Superlight Aero Handlebar is 45g lighter than the VIBE Carbon Aero Handlebar,Full one piece T800 UD carbon fibre monocoque construction gives a lightweight and stiff handlebar,Aerodynamic top section design cuts through the wind without sacrificing strength, stiffness or comfort,Fully internal cable routing options for brake and shift, perfect for Di2,Innegra™ fibres woven into the carbon lay up to add extra security to the construction,Weight - 40cm, 200g / 42cm, 205g.
Boasting e-MTB integration and an oversized diameter the PRO Koryak E-Performance Alloy Handlebar was created to allow you to upgrade and outperformIntegration is the future of cycling and e-Mountain Biking is no different. It boasts strategically located ports which make it possible to internally wire the Shimano STEPS, or alternative control and head units, cables. This ensures a neat and cable free cockpit. The Koryak E-Performance Handlebar also ensures absolute control of your e-MTB even in the most challenging terrain. It boasts an oversized, 35mm, riser handlebar design; a 20mm rise; 11-degree back-sweep; 4-degree up-sweep; a width of 800mm; and a lightweight alloy construction. When paired with a PRO Koryak E-Performance Stem the handlebars' oversized design match the robust aesthetic of modern e-Mountain Bikes.Features:e-MTB specific handlebar,Oversized riser handlebar design,AL7050 construction,Rise: 20mm,Back-sweep: 11-degrees,Up-sweep: 4-degrees,Clamping Diameter: 35mm,Width: 800mm,Weight: 285g.
aking from what we learnt with our Slade bars we up-scaled and redeveloped our bestselling oversized handlebar into a 35mm platform.The S2 bar features new two tone decals with easy cut markings and a custom swaging process for the ultimate in strength to weight ratio.SpecificationsCustom butted and swaged 7075 tubing.,Available in 10, 20 or 38mm rise.,800mm width with 35mm clamping area,5 degree upsweep,8 degree backsweep,Black.
SpecificationsMaterial (HB): AL-6061,Reach (HB): 70mm,Drop (HB): 115mm,Width (centre-to-centre): 42cm, 44cm, 46cm,Clip compatible: Yes,Clamp diam: 31.8mm,Ramp angle: 10°,Outsweep: 11°,Backsweep (degrees): 3,Drop shape: Variable,Clamp width: 100mm,Finish (HB): Bead Blast Black,Drop Flare: 5°.
SpecificationsMaterial (HB): Al-7050,Reach (HB): 70mm,Drop (HB): 128mm,Width (centre-to-centre): 38cm, 40cm, 42cm, 44cm,Clip compatible: No, Yes,Clamp diam: 31.8mm,Ramp angle: 10°,Outsweep: 4°,Backsweep (degrees): 3,Drop shape: Variable,Clamp width: 110mm, 70mm, 90mm,Finish (HB): Matte with white decals,Drop Flare: n/a.
SpecificationsMaterial (HB): Al-7050,Reach (HB): 70mm,Drop (HB): 115mm,Width (centre-to-centre): 40cm, 42cm, 44cm, 46cm,Clip compatible: Yes,Clamp diam: 31.8mm,Ramp angle: 10°,Outsweep: 11°,Backsweep (degrees): 3,Drop shape: Variable,Clamp width: 100mm,Finish (HB): Matte with stealth decals,Drop Flare: 5°.
SpecificationsMaterial (HB): AL-6061,Reach (HB): 70mm,Drop (HB): 128mm,Width (centre-to-centre): 38cm, 40cm, 42cm, 44cm,Clip compatible: Yes, except 38cm,Clamp diam: 31.8mm,Ramp angle: 10°,Outsweep: 4°,Backsweep (degrees): 3,Drop shape: Variable,Clamp width: 110mm, 70mm, 90mm,Finish (HB): Bead Blast Black,Drop Flare: n/a.
Specifications:Material (HB): Unidirectional Carbon,Reach (HB): 70mm,Drop (HB): 128mm,Width (centre-to-centre): 38cm, 40cm, 42cm, 44cm,Clip compatible: No,Clamp diam: 1.8mm,Ramp angle: 10°,Outsweep: 4°,Backsweep (degrees): n/a,Drop shape: Variable,Clamp width: 70mm,Finish (HB): Matte with stealth decals,Drop Flare: n/a.
The Alanera's new DCR (Deda Internal Cable Routing) system allows full internal routing of the cables inside the handlebar when mounted on D-shaped forks. .Developed to be aero, the optimized design of the integrated bar and stem guarantees a perfectly integrated look with the bike. The RHM shape guarantees a very compact reach and drop for a fast change of position from the shifters to the drops. Specific aero spacers with an innovative mounting system complete the design of the handlebar, the result is a bar that is more integrated with the frame. A special aero topcap and a Garmin bike mount complete the supplied accessories. There is an Easy Fixing system for Di2 & EPS unit under the stem.The Alanera is available in 11 different size combinations.Key Features:Sizes: 130x42, 100x42, 90x42, 110x42, 110x44, 120x42, 120x44, 120x46, 130x44, 130x46,Notes about sizes: Stem Length (mm) x handlebar width (cm) measured outside to outside,Shape: RHM (Rapid Hand Movement),Material: UD full carbon construction,Fork Steerer: 1 1/8" - Tapered (28.6mm),Angle: 82deg,Depth: 75mm,Drop: 130mm,Accessories: Garmin bike mount for 500/800 series, aero headset spacers and topcap. (Wahoo mount available to order),Handlebar Weight: 350g (110x42).
What it isAn exceptionally strong carbon fibre 35mm riser bar, that’s built to descend. It is available in 10, 25 and 40mm rise options.Why we made itGravity riding demands a wide and stiff platform for control and instant response, but not so stiff that it punishes hands and arms on long, rough descents. Our 35mm clamp diameter mountain bar combines the DNA of our famous DH bar and the smooth aesthetics of our classic riser for a best-in-class ride experience.Full detailsThe M7 bar is our 35mm bar for the most aggressive and demanding riders. Carbon fibre is the ideal material for a gravity bar because fibre orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminium. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. Available in a 10mm, 25mm, or 40mm rise, the M7 bar features a trail-perfect 8° sweep and 4° tip for your long-travel 29er, enduro race bike, or downhill machine.
What it isA race proven downhill handlebar, available in 30 and 50mm rise options.Why we made itWe built this bar to win downhill races. Over and over again, this bar has delivered confidence and control on the world’s toughest tracks. In fact, these handlebars have frequented the World Cup podium over 75 times in the last eight years. Developed with the fastest riders, and validated at the highest level, the winningest carbon DH bar is also available in two rise options to ensure your preferred fit can be achieved.Full detailsThe M9 bar is our dedicated downhill option. Designed around a 31.8mm clamp diameter and our downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fibre bar and realigned performance expectations. Refined for 2018, the new M9 bar is offered with a 30mm or 50mm rise and features 8° sweep and 4° tip angles. The 50mm rise M9 handlebar has a 70mm-wide clamping zone; the 30mm rise bar has a 55mm clamping zone.