Thomsons road bar features a mild wing shape on top, clamping area wide enough for aero bars, mid-compact reach and drop. This is the modern bar for the modern road bike. Monococque construction for safety and comfort. Thomsons Road bar wing section is small enough not to restrict hand movement when riding on the top and allows bar angle adjustment with out locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed. All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus. The Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders
Titanium is a wonderful material for a handlebar. Not as light as carbon but for a little weight you get an unparralled ride. Strength and beauty count for something as well. This bar will look good and ride well on your bike for years. Built for 31.8mm stems, no shims are used for clamping the Thomson Titanium bar. The very best bar you can buy for a rigid MTB
The all new AEffect 35 handlebar is designed to handle all-round trail riding at a XC weight and attractive pricepoint.Key Features:Manufactured from cold drawn, seamless 2014 Aluminium.,Shot peened for increased fatigue life.,35 optimized triple butted design..Specifications:Built For: XC/Trail,Dimensions: 760mm width, 8° rearward, 5° upward,Rise: 10 mm,Bar Diameter: 35mm,Weight: 335g.
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down - the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. Key Features: Manufactured from cold drawn, seamless 6061 Aluminium.,Shot peened for increased fatigue life.,35 optimized triple butted design.,. Specification: Built for: AM / DH / FR.,Dimensions: 780mm width, 8° rearward, 5° upward.,Rise: 10mm.,Bar Diameter: 35mm.,Weight: 400g.,Colour: Black..
Blending comfort and performance the new Turbine ¾" riser offers category leading sweeps and low rise at an impressive weight of 290g.Butted to create an optimal strength to weight ratio resulting in one tough but light bar.Key Features:Manufactured from cold drawn, 7075 T6 alloy,Light enough for XC but strong enough for AM,Shot peened for increased fatigue life.Specification:Built for XC/Trail,Bar diameter 31.8mm,Weight 245g,Rise 3/4 inch.
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? A rider not worried about having the lightest, most expensive on the market...you just want parts that can take a beating and won't let you downThe Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and youÕre ready to tackle that gap jump that has had your number.Key Features:Manufactured from cold drawn, seamless 6061 Alloy.,Butted for an optimal strength to weight ratio.,Wider construction & re-designed taper offers more control & increased stiffness.,Shot peened for high impact strength & fatigue resistance..Specification:Built for: AM/DH/FR,Length: 740mm, 9° rearward, 6° upward,Weight: 400g,Rise: 1.
Designed with the gravity driven rider in mind, the Atlas ¼" riser bar sets the standard. At 785mm, this is a wide bar that gives you new levels of control on technical terrain. Perfect for intense AM or full on DH Race, the Atlas bar is also available in an exciting range of anodized colours for full customization options. Key Features: Manufactured from cold drawn, seamless 7050-T76 aluminum.,Internal taper increases strength and durability without adding weight.,New ultra low and ultra wide riser geometry helps the modern rider with precise control and confidence at speed., Ultra low, ultra wide, reduced cockpit height.,. Specification: Designed For: DH / FR.,Width: 785mm.,Backsweep: 8 degree.,Upsweep: 4 degree,Rise: 0.5".,Weight: 340g.,Bar Diameter: 31.8mm..
Designed with the gravity driven rider in mind, the Atlas 1¼" riser bar sets the standard. At 785mm, this is a wide bar that gives you new levels of control on technical terrain. Perfect for intense AM or full on DH Race, the Atlas bar is also available in an exciting range of anodized colours for full customization options. Key Features: Manufactured from cold drawn, seamless 7050-T76 aluminium.,Internal taper increases strength and durability without adding weight.,Ultra wide riser geometry helps the modern rider with precise control and confidence at speed.,. Specification: Colour: Black.,Built For: AM / DH / FR.,Sweep: 9° rearward.,Bar Diameter: 31.8mm.,Rise: 0mm.,Weight: 315g.,Width: 785mm..
NEXT bars are manufactured with a leading edge unidirectional carbon weave & precise manufacturing process. This process ensures Race Face bar designs pass our DH strength requirements at an impressively low XC weight.Reinforced stem anti-crush zone minimizes the possibility of stress risers where the stem meets bar the area in which most carbon bars fail. Constructed from a high strength unidirectional weave.Key Features:XC Racing/Trail/AM,Dimensions: 28.5 or 725mm width Sweep: 8° rearward, 4° upward,Rise: ¾ Inch,Bar Diameter: 31.8mm,Weight: 175g,Colours: Carbon, Green, Red, Blue.
Race Face sets another industry benchmark with the SIXC - the world's lightest and strongest carbon AM crank and bar. Building on the unprecedented success of our proprietary Optimized Carbon Technology program, SIXC is poised to rewrite the rules in the 5-6 inch travel bike world.SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a crank and bar for the all mountain rider who demands the ultimate in performance. Strong enough for light freeriding yet feathery enough to propel you past the lycra set, SIXC is the product many epic riders have been waiting for.Key Features:SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight.,Minimum bar width of 27.5" or 700mm at indicated cut marks.,Reinforced clamping zones for lock-on grip.,Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers..Specification:Built for: AM / DH,785mm,Sweep: 9° rearward, 4° forward,Rise: 3/4",Bar diameter 31.8mm,Weight: 220g.
Designed with the gravity driven rider in mind, the Atlas 1¼" riser bar sets the standard. At 785mm, this is a wide bar that gives you new levels of control on technical terrain. Perfect for intense AM or full on DH Race, the Atlas bar is also available in an exciting range of anodized colours for full customization options. Key Features: Designed specifically for abusive riders looking for a wide bar.,Manufactured from cold drawn, seamless 7050-T76 aluminum.,Internal taper increases strength and durability without adding weight.,Ultra wide riser geometry helps the modern rider with precise control and confidence at speed.,Ultra low, ultra wide, reduced cockpit height,. Specification: Sweep: 8° reward, 4° upward.,Bar Diameter: 31.8mm.,Rise: 32mm (1¼").,Built for: DH / FR.,Weight: 340g.,Width: 785mm..
RIDE offers the Race Face performance and craftsmanship the brand is known for at an attractive price point. With laser etched Race Face signature styling, RIDE brings the RF bling and functionality without the price tagKey Features:Manufactured from cold drawn, seamless 6061 material,Shot peened for increased fatigue life,Gradual external swaging & internal taper give increased strength & durability without adding weight.Specification:BUILT FOR: XC/Trail,DIMENSIONS: 710mm or 580mm width, 8° rearward sweep,RISE: 0,BAR DIAMETER:31.8mm,WEIGHT:210g (580mm).