Spank industries developed this bar along with some of the world’s top DH and Enduro pros and utilised a unique construction of Super-6™ aluminium, Spank’s patented CNC bending, and their Dual-Extreme-Gradual Taper (XGT) technology. Performance Optimised Race Bar The result of this collaboration and advanced construction has resulted in a handlebar that is stronger, safer and performance optimised. The Spank Spike 800 Race has an ideal geometry for control and a low weight, making it perfect for aggressive All Mountain (AM), Enduro or Downhill (DH) Racing. Dual XGT (Extreme Gradual Taper) Technology This is a proprietary tube drawing process that tapers the bars from the thickest area at the bar clamping zone, slowly and gradually through the bend zones, to the thinnest areas at the control zones and back to thicker reinforced bar end zones, or “Impact Ends”. Spank has utilized FEA (Finite Element Analysis), laboratory, and rigorous real-world testing to optimise the spread of material to where it is needed to withstand the specific forces at work in each zone while offering better protection against crashes than ever before. The extreme precision enabled by Dual XGT drawing processes also eliminates the need for heavy hand grinding, which can result in imperfections and inconsistency in wall thickness. Impact Ends The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts. These can also be used to support bar ends in the relevant disciplines CNC Bending The precision of 3D CNC Bending in a single fixture allows Spank to optimise their designs further and eliminate the heavy grinding process, making their bars lighter, stronger, and safer! Spank has also taken extra work hardening steps to ensure the stem clamping area of the bar is uniformly cylindrical and true, and as tough as possible Super-6 Aluminium This is a specially blended, highly magnesium-silicon enriched, work-hardened alloy. Super-6 offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile strength to standard 6 series alloys. It is ideal for the creation of thin-walled, super-stiff handlebars. Through the recent adoption of Super-6 materials, Spank’s Spike, Subrosa, and Oozy handlebars are now stronger and show greater resistance to deformation than ever before!
Spank Spoon 800 Skyscraper Riser HandlebarDesigned with mountain bike (MTB) riding in mind, the Skyscraper Riser Handlebar from Spank is ready for whatever challenge you meet on the trail. Benefiting from a hard-wearing shot-peened and anodised finish, for added protection against rough terrain and corrosion, this handlebar ticks all the boxes for riders who like to get rough and rowdy. Features:Material: AlloyFinish: Shot-peened and anodisedUse: MTBType: RiserWidth: 800mmDiameter: 31.8mmWeight: 395g (25mm), 400g (40mm) and 420g (60mm)Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spoon 800 Skyscraper Riser HandlebarDesigned with mountain bike (MTB) riding in mind, the Skyscraper Riser Handlebar from Spank is ready for whatever challenge you meet on the trail. Benefiting from a hard-wearing shot-peened and anodised finish, for added protection against rough terrain and corrosion, this handlebar ticks all the boxes for riders who like to get rough and rowdy. Features:Material: AlloyFinish: Shot-peened and anodisedUse: MTBType: RiserWidth: 800mmDiameter: 31.8mmWeight: 395g (25mm), 400g (40mm) and 420g (60mm)Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank Spoon 800 Skyscraper Riser HandlebarDesigned with mountain bike (MTB) riding in mind, the Skyscraper Riser Handlebar from Spank is ready for whatever challenge you meet on the trail. Benefiting from a hard-wearing shot-peened and anodised finish, for added protection against rough terrain and corrosion, this handlebar ticks all the boxes for riders who like to get rough and rowdy. Features:Material: AlloyFinish: Shot-peened and anodisedUse: MTBType: RiserWidth: 800mmDiameter: 31.8mmWeight: 395g (25mm), 400g (40mm) and 420g (60mm)Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Cyrano R3 Road HandlebarRidden to success by multiple UCI World Tour teams, the Cyrano R3 bar is made from top-end Ergal aluminium, making it both light and strong. Fizik used this material to ensure this bar delivers pinpoint handling and efficient power transfer through reduced flexing when you’re sprinting or climbing. Just as your choice of Fizik Spine Concept saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, Fizik offers this same Spine Concept guideline to help you choose your most comfortable road handlebar shape.The application of The Spine Concept to handlebar shape is the result of Fizik's research with riders of 3 UCI World Tour Teams that were riding Fizik saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.Features: Material: Ergal 7075-T6 Aluminium Stem Clamp Diameter: 31.8mm Flare of Drops: 38 and 40cm Widths: 2°; 44 and 46mm Widths: 3° Lever Compatibility: Standard 23.8mm clamp size Compatible with GPS Mounts: Yes Clip-on Aerobar Compatible: Yes Internal Cable Routing: No Graphics on both sides to mark where levers should be placed and where to finish wrapping bar tape Width measured centre to centre Weight: 245g (size 42cm) Handlebar Options:Your shoulders’ width should determine your handlebar width. Choose from the following centre to centre measurements: 40/42/44/46cm. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to. You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to. You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar dropBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Cyrano R3 Road HandlebarRidden to success by multiple UCI World Tour teams, the Cyrano R3 bar is made from top-end Ergal aluminium, making it both light and strong. Fizik used this material to ensure this bar delivers pinpoint handling and efficient power transfer through reduced flexing when you’re sprinting or climbing. Just as your choice of Fizik Spine Concept saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, Fizik offers this same Spine Concept guideline to help you choose your most comfortable road handlebar shape.The application of The Spine Concept to handlebar shape is the result of Fizik's research with riders of 3 UCI World Tour Teams that were riding Fizik saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.Features: Material: Ergal 7075-T6 Aluminium Stem Clamp Diameter: 31.8mm Flare of Drops: 38 and 40cm Widths: 2°; 44 and 46mm Widths: 3° Lever Compatibility: Standard 23.8mm clamp size Compatible with GPS Mounts: Yes Clip-on Aerobar Compatible: Yes Internal Cable Routing: No Graphics on both sides to mark where levers should be placed and where to finish wrapping bar tape Width measured centre to centre Weight: 245g (size 42cm) Handlebar Options:Your shoulders’ width should determine your handlebar width. Choose from the following centre to centre measurements: 40/42/44/46cm. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to. You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to. You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar dropBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Cyrano R3 Road HandlebarRidden to success by multiple UCI World Tour teams, the Cyrano R3 bar is made from top-end Ergal aluminium, making it both light and strong. Fizik used this material to ensure this bar delivers pinpoint handling and efficient power transfer through reduced flexing when you’re sprinting or climbing. Just as your choice of Fizik Spine Concept saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, Fizik offers this same Spine Concept guideline to help you choose your most comfortable road handlebar shape.The application of The Spine Concept to handlebar shape is the result of Fizik's research with riders of 3 UCI World Tour Teams that were riding Fizik saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.Features: Material: Ergal 7075-T6 Aluminium Stem Clamp Diameter: 31.8mm Flare of Drops: 38 and 40cm Widths: 2°; 44 and 46mm Widths: 3° Lever Compatibility: Standard 23.8mm clamp size Compatible with GPS Mounts: Yes Clip-on Aerobar Compatible: Yes Internal Cable Routing: No Graphics on both sides to mark where levers should be placed and where to finish wrapping bar tape Width measured centre to centre Weight: 245g (size 42cm) Handlebar Options:Your shoulders’ width should determine your handlebar width. Choose from the following centre to centre measurements: 40/42/44/46cm. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to. You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to. You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar dropBuy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This riser bar is engineered for fast-paced MTB rides, as it gives you exceptional strength and control on your mountain bike.It features a hard-wearing alloy construction, which makes it more than capable of handling all the abuse that's associated with shredding the mountain bike trails.Nukeproof has also put this riser bar through a shot-peening process, which gives it extra durability as you tackle all the challenges that are associated with all-day epics in the mountains. Key Features: Material: 6061 Alloy,Finish: Shot-peened,Backsweep: 9 degrees,Upweep: 5 degrees,Length: 800mm,Diameter: 35mm,Technical Markings: Markings on the top of the handlebar,Weight: 385g (25mm rise version).
This stylish mount allows you to take full advantage of all the robust data that your Edge givesThe Edge is out in front of you for easier, heads up positioning and increased safetyFits 31.8 mm barsCompatible with Edge 200, 500, 800 and Forerunner 310XT, 910XT with the quick release kitWeighs just 26 gMade from impact resistant plastic.Please note for the mount to work with the Forerunner 910XT or 310XT you must remove the screws from the bottom, rotate the inner-mount and reinsert the screws, and your watch will mount in the proper orientation on the handlebar
This extended length plastic mount allows you to take full advantage of all the data that your Edge givesThe Edge is out in front of you for easier, heads up positioning and increased safety,Fits 31.8 mm bars,Compatible most imprtantly with Edge 1000 but also with Edge 810, 800, 510, 500, 200, plus Forerunner 310XT, 910XT with the quick release kit,Weighs just 30 g,Made from impact resistant plastic.Please note for the mount to work with the Forerunner 910XT or 310XT you must remove the screws from the bottom, rotate the inner-mount and reinsert the screws, and your watch will mount in the proper orientation on the handlebar
Cyrano is fizik’s range of cockpit components, comprising handlebars, stems and seatposts. Handlebars are highly-stressed, safety-critical parts, making strength and fatigue resistance of paramount importance. Low weight is of course also a priority. Cyrano handlebars are available in three models, according to material specification, and in three shapes to fit different rider physiques. Each shape is carefully designed to give easy transitions between different riding positions – tops, hoods and drops. The range of nine fizik Cyrano handlebars models are each available in a choice of four widths, to ensure a perfect fit. The Cyrano R3 is made using Ergal aluminum; a 7075-series aluminum, with a high strength-to-density ratio that has the highest level of stiffness. Ergal also has good fatigue resistance, particularly important in handlebars. The Cyrano R3 Bull accommodate for the least flexible Bulls riders who require a slightly more upright riding position for maximum comfort and efficiency. This is produced by reducing the reach (80 mm) and introducing a still shallower drop (130 mm).
Whether you're training or competing, this road bike drop handlebar is engineered for smooth, light and dependable steering performance. It features a hard-wearing 7050 aluminium build, which makes it more than capable of handling all of the intensity associated with racing. Zipp has also equipped this model with comfortable geometry, so you can benefit from smooth transitions and ergonomic hand positioning. Another highlight is its clip compatible design, which allows you to add clip-on aerobars (available separately) for an even broader range of positioning and comfort. Weighing in at only 275g, this is a lightweight choice of upgrade for dominating your way to the finish line. Race-Ready Road Bike Drop Handlebar A traditional road racer’s bar, the Service Course SL-88 helps you achieve a “long-and-low” position on the bike. The ends of the drops provide a horizontal flat position for the rider to rest straight down upon. This versatility comes from the bar’s longer 88mm reach (the horizontal distance from the bar’s stem clamp area to centre of the brake perch) and deeper 130mm drop (vertical distance from the bar’s stem clamp area to bottom of drops). In addition, the bar’s 14° ramp angle provides a smooth transition to the brake hoods for a comfortable ergonomic hand position on the hoods. 7050 aluminium. Lightweight and durable. Drops are angled outward by 3 degrees to reduce wrist strain. Clip compatible. Manufacturer's Part Numbers: 00.6618.026.030 Black/Black 40cm 00.6618.026.040 Black/Black 42cm 00.6618.026.050 Black/Black 44cm