The Pro Vibe Di2 Alloy Handlebar is constructed of 7075 aluminium, a high strength alloy commonly used in the aircraft industry making it the ideal choice to produce this lightweight, strong and rigid handlebar. The handlebar features an oversized 31.8 mm clamp diameter which reduces unwanted flex under high load by increasing strength and rigidity. For further rigidity, the 31.8 mm diameter is carried across the top of the bar, keeping the strength where it is needed and reducing the wall thickness where vital grams can be saved. The Vibe has been developed with Di2 in mind, offering ultimate integration for maximum aerodynamic performance and ultra-clean styling. The specially-positioned cable ports enable you to feed Di2 cables through the system. It s also fully compatible with the new Shimano Dura-Ace R9100 Di2 junction box, which can sit at the end of either drop instead of a bar plug.7075 Alloy construction31.8mm Clamp diameterShimano Di2 compatibleApprox. Weight: from 245 grams
The Pro Vibe Di2 Alloy Handlebar is constructed of 7075 aluminium, a high strength alloy commonly used in the aircraft industry making it the ideal choice to produce this lightweight, strong and rigid handlebar. The handlebar features an oversized 31.8 mm clamp diameter which reduces unwanted flex under high load by increasing strength and rigidity. For further rigidity, the 31.8 mm diameter is carried across the top of the bar, keeping the strength where it is needed and reducing the wall thickness where vital grams can be saved. The Vibe has been developed with Di2 in mind, offering ultimate integration for maximum aerodynamic performance and ultra-clean styling. The specially-positioned cable ports enable you to feed Di2 cables through the system. It s also fully compatible with the new Shimano Dura-Ace R9100 Di2 junction box, which can sit at the end of either drop instead of a bar plug.7075 Alloy construction31.8mm Clamp diameterShimano Di2 compatibleApprox. Weight: from 245 grams
The Pro Vibe Di2 Alloy Handlebar is constructed of 7075 aluminium, a high strength alloy commonly used in the aircraft industry making it the ideal choice to produce this lightweight, strong and rigid handlebar. The handlebar features an oversized 31.8 mm clamp diameter which reduces unwanted flex under high load by increasing strength and rigidity. For further rigidity, the 31.8 mm diameter is carried across the top of the bar, keeping the strength where it is needed and reducing the wall thickness where vital grams can be saved. The Vibe has been developed with Di2 in mind, offering ultimate integration for maximum aerodynamic performance and ultra-clean styling. The specially-positioned cable ports enable you to feed Di2 cables through the system. It s also fully compatible with the new Shimano Dura-Ace R9100 Di2 junction box, which can sit at the end of either drop instead of a bar plug.7075 Alloy construction31.8mm Clamp diameterShimano Di2 compatibleApprox. Weight: from 245 grams
The handlebar is hand built using high modulus graphite fibre, combining both UD and 3K weave to balance weight with robust construction. Each handlebar is rigoursly tested and is cerfied to ISO 4210-2 Available in 3 risers - 12mm, 25mm and 38mm and two widths- 780mm and 800mm, depending on your riding style and preference, all in 31.8mm clamp. Particle paint on the bar ends and clamp areas provides additional friction and prevents slip Graphics are subtle and finishing is a matte black
Race Face SIXC represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for downhill (DH) racing or light freeriding (FR), yet light enough to propel you to the cross country (XC) podium, SIXC is the product many epic riders have been waiting for. Race Face sets another industry benchmark with the SIXC. Building on the unprecedented success of Race Face's proprietary Optimised Carbon Technology program, SIXC is poised to rewrite the rules. SIXC bars are manufactured with a leading edge composite material which allows Race Face to reach its high strength requirements at an impressively low weight with reinforced clamping zones for lock-on grip. The Race Face SIXC handlebar can be cut down to minimum width of 27.5” or 700mm by using the indicated cut marks. Daily destructive testing from each production run ensures each bar meets the exacting standards set by Race Face's engineers.
Race Face SIXC Carbon Riser HandlebarRace Face views their SIXC Carbon Riser Handlebar the lightest and strongest in the world for all-mountain and downhill cycling. This industry-leader offers exceptional control and agility when tackling tough trails. Lightweight and Strong Carbon Riser BarThe SIXC Carbon Riser Bar is infused with years of dedicated research and development in both carbon and all-mountain products. Race Face has engineered the Carbon Riser Bar for the aggressive rider who demands optimal performance from every area of their machine. This carbon handlebar is strong enough for downhill racing or light freeriding, yet light, fast, and responsive to hit top speed quickly and easily.Features:Use: All-mountain/downhillBar Diameter: 31.8mmSweep: 8° rearward, 4° upwardRise: 19mmReinforced clamping zones for lock-on gripDaily destructive testing from each production run ensures each bar meets the exacting standards set by Race Face engineersWarranty: Race Face 3-YearWeight: 220gBuy Race Face Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fizik Cyrano R1 Road HandlebarThe Cyrano R1 is the mid-range handlebar from fi'zi:k. Made from uni-directional carbon, this is both strong and lightweight.Just as your choice of fi'zi:k Spine Concept saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, fi'zi:k offers this same Spine Concept guideline to help you choose your most comfortable road handlebar shape.These products are being ridden at UCI World Tour level by AG2R Pro Cycling Team.The application of The Spine Concept to handlebar shape is the result of fi'zi:k's research with riders of 3 UCI World Tour Teams that were riding fi'zi:k saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.Handlebar Options:Your shoulders' width should determine your handlebar width. Choose from the following centre-centre measurements: 400/420/440/460mm. The Snake Handlebar: If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach and deeper, classic-style drop. The Chameleon Handlebar: If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a chameleon. You are better able to reach further, but perhaps you can't get down quite as low on the handlebar drops as a Snake would be able to.You will prefer the Chameleon Handlebar because it has a longer reach but a shallower, more ergonomic-style drop. The Bull Handlebar: If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders' width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to.You will prefer the Bull Handlebar because it has a shorter reach and a shallower, more ergonomic-style handlebar drop. Features:Material: Uni-Directional Carbon Flare of Drops: 3 degreesGraphics on both sides to mark where STIs should be placedGraphics on both sides to mark where to finish wrapping bar tape Weight: 205g (size 420mm, centre to centre) Its design is a perfect complement with:-Fizik Cyrano R1 Seatpost.Fizik Cyrano R1 Stem.Buy Fizik Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Zipp Service Course SL 80 Ergo handlebar is all about making you faster in style and comfort. The bar offers an 80mm reach and 125mm drop, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. This bar has a flattened top and 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course SL 80 Ergo is our first ergo bar to be clip-on compatible. Made of 7050 aluminum, the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. Features: Distinctive Zipp cosmetics 7050 aluminum for light weight and durability 80mm reach and 125mm drop for a medium-high position Flattened top shape with 3° backsweep for comfort Clip-on Compatible (40, 42, 44cm sizes only) Di2® RS910 junction compatible Matte Black nano blast aluminum ISO 4210 compliant. See Declaration of Conformity for details. Lifetime warranty
Coming equipped with a 7075 heat-treated and double-butted alloy construction, this handlebar is more than capable of handling all the pressure and intensity that's associated with all-day epics in the mountains. DMR has also kitted out this version with a triple-anodised finish that makes it exceptionally tough, wear-resistant and protected against corrosion when riding in all-weather conditions. Part of the special edition Liquid Camo series, this model features eye-catching camo graphics, which makes it look as awesome as it performs while also complementing any ride. Limited Edition Handlebar with DMR Team Rider Design Ready for long days on the MTB trails, this limited edition handlebar was developed with DMR's team riders including Olly Wilkins. Its wingbar shape features five degrees upsweep to stop it feeling flat or droopy and its eight degrees backsweep is optimal for stand-up riding and also allows for a relaxed seated position. Available in 800mm width, 35mm clamp only.
Ritchey WCS Evocurve Road HandlebarMaximising steering performance and streamlining your riding position, this excellent Evocurve bar by Ritchey has the build and angles to see you to the podium with precision and pace. A hybrid of Ritchey's Evolution and Curve models, this World Championship Series bar boasts a large top section and 4-degree backsweep, plus extended reach and drop lengths to keep you well-positioned, whatever your riding style. Aluminium-made, it gives a dependably durable performance from start to finish. Features:Material: 7050 AluminiumDrop: 128mmReach: 83mmDrop Flare: 2°Backsweep: 4°Bar Clamp Diameter: 31.8mmWeight: 253g (approx)Buy Ritchey Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ritchey WCS Butano Gravel Bike HandlebarTaking its name from the trails near the Ritchey founder’s home, the WCS Butano Gravel Bike Handlebar is ready for tough gravel trails and the most challenging terrain types on your adventure rides. An ideal addition to modern multi-purpose drop bar bikes, its short reach and shallow drop put you in the ideal position mixed surface rides. Plus, with a 4° sweep on the top section and 12° flare on the drops, you’ll have the perfect hand position for staying in control, no matter how rough your route gets. Made from triple-butted 7050 aluminium, it’s built for riding anywhere.Features: Material: Triple Butted 7050 Alloy Stem Clamp Area: 31.8mm Reach: 73mm Drop: 118mm Drop Flare: 12° Top Section Backsweep: 4° Top Section Flare Out: 2° Drop Bend Shape: Compact Top Section Shape: Ergonomic Use: Adventure, Cyclocross (CX), Gravel Lever Compatibility: Standard 23.8mm lever clamps GPS Mount Compatible: Yes Internal Cable Routing: No Clip-On Aero Bar Compatible: Yes Compatible with Shimano EW-RS910 junction box Compatible with Ritchey C260 stem Manufacturer's Part Number: 30355008018 Weight: 275g (approx.)Buy Ritchey Components from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.
Ritchey WCS Butano Gravel Bike HandlebarTaking its name from the trails near the Ritchey founder’s home, the WCS Butano Gravel Bike Handlebar is ready for tough gravel trails and the most challenging terrain types on your adventure rides. An ideal addition to modern multi-purpose drop bar bikes, its short reach and shallow drop put you in the ideal position mixed surface rides. Plus, with a 4° sweep on the top section and 12° flare on the drops, you’ll have the perfect hand position for staying in control, no matter how rough your route gets. Made from triple-butted 7050 aluminium, it’s built for riding anywhere.Features: Material: Triple Butted 7050 Alloy Stem Clamp Area: 31.8mm Reach: 73mm Drop: 118mm Drop Flare: 12° Top Section Backsweep: 4° Top Section Flare Out: 2° Drop Bend Shape: Compact Top Section Shape: Ergonomic Use: Adventure, Cyclocross (CX), Gravel Lever Compatibility: Standard 23.8mm lever clamps GPS Mount Compatible: Yes Internal Cable Routing: No Clip-On Aero Bar Compatible: Yes Compatible with Shimano EW-RS910 junction box Compatible with Ritchey C260 stem Manufacturer's Part Number: 30355008018 Weight: 275g (approx.)Buy Ritchey Components from Chain Reaction Cycles. Ride. Eat. Sleep. Repeat.