Ideal for commutters or long distance riders the grips are 136mm wide and 51mm at their deepest point. The grips combine a hard plastic inner with a rubber/gel outer. The outer of the grip feature a microtech texture with embossed cross hatching- putting grip in the right places and minimising unneccessary friction. The closed end construction removes the need for bar end plugs. The anodised laser etched clamp and bolt allow the rider to secure the grips firmly in place. For a shallower option, check out the Lifleline Shallow Palm Comfort Ergo Grips.
These BMX grips feature a classic flangeless mushroom style grip with a super-soft but hard-wearing compound. This makes them easy to grab when steering as well as nailing your favourite tricks. Measuring 150mm in length, these grips look amazing in this limited-edition colourway.
The DMR Deathgrip is combined with a waffle section, which provides additional grip and a mushroomed thumb area that ensures comfort over all terrain types. Supplied as a pair, the DMR Brendog Death Grip was created in collaboration with Downhill (DH) and Freeride (FR) Pro rider Brendog (Brendan Fairclough).
These grips feature a soft, very grippy compound, which makes them perfect for long days riding and sure to provide excellent grip regardless of the weather conditions. These grips have been used by Sam when riding the toughest stages in the world of MTB racing, in the most demanding conditions. Featuring an Enduro race compound, these grips are designed for enduro race days to give excellent grip and comfort, this does mean they will wear quicker than the A15 Sam Hill Grips. Perfect for World Level Racing and Weekend Trail Sessions Alike Nukeproof and Sam Hill work together to create World Level products that everyone can use. The Sam Hill Enduro Race Grip was first used by Sam in round 4 of the 2018 Enduro World Series (EWS) where he took the win and has been using them ever since. After that race, he described the compound as “extra extra soft, semi throttle durometer” and described the grips as “pretty comfortable little things”. With comments like that we knew we were onto a winner with these grips. Nukeproof Sam Hill Enduro Race Grip installation instructions are available for download HERE.
Still a wildly popular mountain bike (MTB) grip, the beauty of this component is its simplicity. These minimalist Ritchey foam grips offer comfort, control, and a faithful ride experience out on the trails.
Jacy Shumilak, Sam Hills mechanic is always looking for ways to improve Sam’s bike. Jacy has been adding grip tape to Sam’s shifters and levers to give him maximum grip when riding. He has also been adding moto foam to those hard to get at areas where mud likes to gather. The moto foam helps keep mud out but the open cell design allows water to flow through so it does not get heavier. This foam can be easily removed during maintenance and cleaned with fresh water. This bundle is for 10cm x 10cm of grip tape and 30cm x 30cm of moto foam which allows you to easily get that professional setup on your own bike. How to use: Grip tape – Cut to size and stick on contact areas for maximum grip. Moto foam – Cut to size and place in areas like crank spindle or bottom of your steerer tube to keep mud out. This open cell foam will not absorb water but will keep mud out.
Following on from the success of the Nukeproof A15 durometer Sam Hill Series Grips, which Sam rode to overall EWS victory in 2017, Sam asked Nukeproof to develop an even softer compound for long days on the bike riding the toughest Enduro stages in the world. These are Sam’s special edition oil slick clamp version. Perfect for Enduro Racing Extra Soft Compound Sam has always been particular about his setup and Nukeproof has taken great pride in developing no-nonsense, custom products for Sam with some innovation even coming from his motocross bike! Together, they have helped to produce World level products that everyone can use. These grips were first used by Sam in round 4 of the 2018 EWS where he took the win and has been using them ever since. After that race he described the compound as “extra extra soft, semi throttle durometer” and described the grips as “pretty comfortable little things”. With comments like that we knew we were onto a winner with these grips.
Each pack contains two replacement collars, which allow you to customise your existing grips. They also feature an anodised aluminium construction, which makes them perfect for enjoying a tight grip in all-weather conditions. DMR has finally equipped these with stainless steel pinch bolts for a secure and dependable hold.
The grips are 115mm long which is the perfect length for small hands and there is a flange on inner clamp for additional comfort and protection. The outer end is soft rubber to protect the rider and also the handlebar in the event of a crash.
The Classic Locking grips from Ritchey offer an uncomplicated synthetic leather grip with two locking rings to stop slippage. Measuring at 130mm in length, these are a perfect upgrade for smooth steering and handling wherever your next ride takes you.
These DMR Deathgrip Flange MTB grips feature a soft Kraton rubber construction, which makes them comfortable to hold onto during all-day epics in the mountains. Part of a collaboration between Brendan Fairclough and DMR, these grips aim to deliver next-level performance and dependability on your downhill (DH) or MTB adventures. Coming as a pair and weighing in at only 100g, the DMR Brendog Flanged Deathgrip is a great choice of upgrade for riders who want superior grip without any unnecessary weight. One final highlight of the DMR Deathgrip flange is its design features a tapered core, which means that there isn't any need for an outer lock ring.
Ready for long days on your favourite mountain bike (MTB) trails, this grip comes equipped with a dual lock-on design for maximum security and slip-free performance on your ride. Its durable A15 compound also delivers a comfortable and soft feel, while ensuring a reliable grip as you weave your way from trail to trail. One final highlight is its end cap can be removed to run in-bar tools. Sold as a pair. Manufacturer's Part Numbers: 5056305578794 Blue 5056305578800 Grey 5056305578817 Black 5056305578824 Green