The Shimano FD-M4100 2x10-speed front derailleurs use Shimano's new side swing technology for enhanced cable routing, light action, and smooth operation. The new design also increases clearance for large wheels and short chain stays.Wide link design 10-speed Deore MTB front derailleurSide swing, side pull front derailleur decrease problems with tyre clearance and reduces cable frictionDesigned specifically with modern trail bikes in mind, Shimano side swing technology front derailleurs increases tyre clearance, while cable routing resulting in the lightest shifting action yetSide pull cable routingWide pivot link design for greater torsional rigidity improves shifting response and service lifeDirect frame fit for easy and accurate installation giving perfect alignment10-speed MTB drivetrain compatibilityReinforced steel chain guide offers high strength and rigidity for improved shifting responseFor double 38 tooth max chainringChainline both 48.8/51.8mm
Now simplified with a single derailleur cage length, the new 12-speed Shimano Ultegra R8150 rear derailleur packs our fastest, most precise shifting into a more approachable option. With our fastest, most accurate shifting, the new 12-speed Ultegra R8150 rear derailleur is more versatile than ever thanks to a single cage length option that is compatible with 28-34T low sprockets.Ultegra Shadow design with Di2 technology, shifting is easy and precise - just a light touch, as soft as a mouse click, is sufficient for the front or rear derailleur to instantaneously select the correct gearThe rear derailleur is now the brains of the system with wireless connectivity to the shifters. It acts as the point the system is charged, provides ANT+ connection to 3rd party devises and replaces the handlebar junctionButton on the derailleur for Di2 operations, and LED light denotes synchronized shift mode, setting mode and charge requirementsSleek appearance with low profile Shadow design construction reduces risk of damage in a crashProgrammed automatic motion at the touch of a switch makes this derailleur quick, smooth and effortless to shiftThe removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shiftsDerailleur contains a saver (fuse) function, where the inner structure is protected from strong impactsHigh tolerance cold forged aluminium link plates and body construction is extremely light and durableFour self-lubricating micro-machined fluorine-coated link pivot bushings provide low-friction shifting12-speed E-tube Di2 compatibleWide gear ratio compatible up to 11-34T
Utilising the Shimano Shadow RD+ design, the Shimano Deore M5120 rear derailleur delivers consistent MTB shifting performance over rough terrain. The low-profile design avoids damage from rocks whiles Shimano's chain stabilising technology reduces chain drop and makes for a quiet drivetrain in all gear positions.Deore M5120 Shadow plus 10/11-speed rear derailleur for dependable shifting performance and durabilityShadow plus features a super low-profile design and optimized slant angle for super light shifting actionShadow Plus uses a chain stabilising switch that when on will reduce chain bounce in rough terrain maintaining more stable drive and shiftingSingle tension spring prevents contact with the chainstay resulting in a silent rideDirect cable routing prevents snagging from any trail side hazardsWide alloy links and pivot bodyFluorine-coated link pin bushingsStrong return spring for a positive shifting feelDurable 11T bearing pulleys for low frictionTop normal spring uses the spring to select higher gearsHG-X11 11-speed and HG-X 10-speed compatibleMax low sprocket: 46T (1x10-speed), 42T (2x11/2x10-speed)41T capacity SGS cage
The Shimano Tiagra 4700 double front derailleur has been updated in terms of performance and looks to bring it inline with the more expensive derailleurs in the Shimano range. The derailleur gets an updated extended geometry with a longer lever arm for faster shifting which is a feature that is taken from the 11-speed derailleurs.Top Gear Teeth: 50-56TMaximum Capacity: 16T
Using a low-profile Shimano Shadow RD design, the Shimano Deore M4120 derailleur is perfect for 2x10 and 2x11-speed drivetrains used for MTB riding.Deore M4120 Shadow 10/11-speed rear derailleur for the dependable shifting performance and durabilityShadow design features a super low-profile design and optimised slant angle for super light shifting actionSingle tension spring prevents contact with the chain stay resulting in a silent rideDirect cable routing prevents snagging from any trail side hazardsWide alloy links and pivot bodyFluorine-coated link pin bushingsStrong return spring for a positive shifting feelDurable 11T bearing pulleys for low frictionTop normal spring uses the spring to select higher gearsHG-X11 11-speed and HG-X 10-speed compatibleMax low sprocket: 42T (2x11/2x10-speed)41T capacity SGS cage
The Shimano Altus mountain bike rear derailleur with light action operation and over-size pulleys for a wide gear choice.Oversize 13/15-tooth tension and guide pulleys to reduce noise and wearExtension spring and low-friction fluorine-coated link pivot bushing result in a light shifting actionTop normal spring for use with Rapid-fire shiftersIG and HG chain, 7- and 8-speed compatibleFor use with 28 to 34 tooth low rear sprockets, total capacity 43 teeth
The Shimano RD-R3000 9-speed Rear Derailleur features an advanced light action for low-friction shifting up or down the block, a wide link design for increased rigidity and precise gear shifts. The super light shift action is complemented by large 11 tooth pulleys which run on high quality bushings to offer reduced noise and extended service life.Compatible with 9-speed drivetrainsShort cage: 37 tooth total capacity, rear sprocket size range 11-32TMedium cage: 43-tooth total capacity, rear sprocket size range 11-34T11-tooth pulleys for reduced pulley wear & chain noiseWide link design for increased rigidity & precise gear shifts
New from Shimano is the GRX RX810 Front Derailleur. Aimed at gravel bikes, this derailleur has lighter shifting, a wider range of gearing and easy adjustment/set up.Ergonomic power curveIntegrated cable tension adjustmentNatural stroke feelingChain line +2.5 mm vs. conventional road FD17T front rangeMore cable routing optionsWider tire clearanceThe GRX RX810 front derailleur has integrated tension adjust for easy adjustment and has more cable routing options compared to other derailleurs. It s got wider tyre clearance and Shimano have designed it to have a natural stroke feeling.
The new GRX RX400 Front Derailleur is aimed at gravel bikes and provides fast and smooth shifting.Ergonomic power curveIntegrated cable tension adjustmentNatural stroke feelingChain line +2.5 mm vs. conventional road FDCompatible with up to 42mm tyresMore cable routing optionsThe GRX RX400 front derailleur has integrated tension adjust for easy adjustment and has more cable routing options compared to other derailleurs. Its compatible with up to 42mm tyres and Shimano have designed it so it has a natural stroke feeling.
The Shimano Tourney triple front derailleur is excellent for riders who are taking their first steps into road cycling or for riders who appreciate touring. Simple in design and low in price, yet still offering Shimano quality and durability.Chain Guide: TripleCassette Compatibility: 7 SpeedTop Gear Teeth: 50TMounting: Clamp Band Chain Line: 45mm
Acera mountain bike rear derailleur with light action operation and over-size pulleys for a wide gear choice. Oversize 13-tooth tension and guide pulleys to reduce noise and wear. Extension spring and low-friction fluorine-coated link pivot bushing result in a light shifting action. Top normal spring for use with Rapidfire shifters.
More compact and faster than ever, the Ultegra R8150 front derailleur performs digitally precise front shifts under any circumstances. Combining Shimano's new Di2 platform and the road incarnation of Hyperglide+, the Ultegra R8150 front derailleur shifts between chainrings with our fastest, most seamless action.The Shimano Di2 front derailleur's operation is pioneering, smooth shifting is guaranteed thanks to wireless communication with the gear levers. What's more, shifting the rear derailleur automatically trims the front derailleurFull and semi synchronized shifting programable, Synchro shifts compatible meaning a single shifter can control both front and rear shifting which can be fully custom tuned to your riding preferences. Semi synchronized shifting means when a front shift is made the rear mech will automatically correct to the appropriate ratioThe removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shiftsThe front derailleur also trims automatically; the cage moves in response to the position of the rear derailleur on the cassette to ensure no chain rub and a quiet unobtrusive ride, enabling you to concentrate on the road aheadDesigned to work with the wider gear pitch spacing Shimano chain sets without sacrificing shifting performance on bikes with 135 / 142 mm O.L.D.Braze-on fit as standard; if your bike does not have a braze-on mount seat tube adapters are available12-speed E-tube SD300 wire compatible