Shimano Tourney A073 7/8 Speed Triple ChainsetThis crankset is compatible with 3x7 and 3x8 drivetrains and provides wide range 50-39-34T gearing with a chain guard. It features a robust alloy construction, which makes it perfect for stress-free urban commuting from A to B. Shimano has also equipped this version with its renowned Hyperglide sprockets that incorporate specially positioned shift ramps and tooth profiles for improved chain control during shifting. This results in fast and responsive indexed shifting as you travel from the smooth city pavement to the countryside. Features:Material: AlloyUse: Road, Urban and LesiureSeries: Tourney A070BB Interface: Square taperBB Included: NoChainline: 45mmCompatible Chain: HGGear Arms: 5PCD: RivetedRear Speeds: 7/8 speedRecommended BB Threaded (Normal): BB-UN26Q-Factor: 171.5mmNumber of Chainrings: 3Chainring Type: SG-XInterchangeable with SHIMANO road front chainring 8/7-speed systemTooth Count: 50/39/30TPart Number: 170mm: FCA073C090; 165mm: FCA073A090Technologies:Dual SIS Index: The SIS rear index shifting system was adopted at the front. With the index system at the front shifting operation is easier and more comfortable.HG HyperGlide: The distinctively designed HYPERGLIDE sprockets incorporate specially positioned shift ramps and tooth profiles for improved chain control during shifting. Fast and responsive indexed shifting is the result. The HG cassette sprocket, which was developed for the MTB 10-speed system, underwent comprehensive optimization to achieve super-highly efficient shifting.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Deep in the hills of Santa Cruz, cyclists are met by a nasty, four-mile, 1800 ft. climb named Alba Road. This respected ascent was the inspiration for the Praxis Works Alba road chainset. With its shapely forged-alloy arms, M24 alloy spindle, LevaTime II X-Spider and chainring, the Alba is ready for anything. LevaTime X-Spider and Chainring This 1x10/11 speed chainset features a LevaTime II (LT2) X-Spider and chainring that's the product of years of relentless testing and tweaking. This all new LT2 X-Spider is even stiffer than the original generation X-Spider. With a new forging design to support the new LT2 5mm plate big rings, this direct mount model keeps things flex-free when it’s time to put the power down. One Shot Forging At Praxis Works, the primary reason it forges its chainring is that it allows them to create dramatically shaped teeth and ramping surfaces. The brand's “One Shot” forging process allows it to make these shapes, and at the same time, create a harder and tougher ring than the competition’s machined rings. Imagine for a second, you have a big hammer and you are hitting a cold block of metal trying to shape it. Now, imagine the hammer is the size of a car and when you swing that hammer you’ve got hundreds to thousands of tons of pressure behind it. It’s a very intense and difficult process that requires a great deal of tooling know-how. This manufacturing process happens to be the brand's specialty. M24 Bottom Bracket This chainset comes complete with a press fit M24/GxP bottom bracket for installing a M24/GxP spindle crank into a BB86 Road or BB90/BB92 MTN Frame. Praxis M24 bottom brackets have a 24mm Drive and a 22mm NonDrive Bearing. These are specifically made for use with Praxis M24 spindle cranks or SRAM GxP spindle cranks. A drive-side wave washer is used for preload of the bearings. This specific press fit M24 bottom bracket is made to be installed in a BB86 Road or BB90/92 MTN frame. Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe. Please note: Image is for demonstration purposes only, actual chainset contains an M24 bottom bracket. Manufacturer's Part Numbers: 89222983 Black 40T 165mm 89222979 Black 40T 170mm 89222980 Black 40T 172.5mm 89222981 Black 40T 175mm
This triple crankset features a robust alloy construction, which makes it perfect for stress-free urban commuting from A to B. Shimano has also equipped this version with its renowned Hyperglide sprockets that incorporate specially positioned shift ramps and tooth profiles for improved chain control during shifting. This results in fast and responsive indexed shifting as you travel from the smooth city pavement to the countryside. Item Top Features Continued: Recommended BB Threaded (Normal): BB-UN26 Q-Factor: 171.5mm Number of Chainrings: 3 Chainring Type: SG-X Interchangeable with SHIMANO road front chainring 8/7-speed system Tooth Count: 50/39/30T Part Number: 170mm: FCA073C090; 165mm: FCA073A090 Technologies: Dual SIS Index: The SIS rear index shifting system was adopted at the front. With the index system at the front shifting operation is easier and more comfortable. HG HyperGlide: The distinctively designed HYPERGLIDE sprockets incorporate specially positioned shift ramps and tooth profiles for improved chain control during shifting. Fast and responsive indexed shifting is the result. The HG cassette sprocket, which was developed for the MTB 10-speed system, underwent comprehensive optimization to achieve super-highly efficient shifting.
Praxis Works Alba 1x10-11 Speed Direct Mount ChainsetDeep in the hills of Santa Cruz, cyclists are met by a nasty, four-mile, 1800 ft. climb named Alba Road. This respected ascent was the inspiration for the Praxis Works Alba road chainset. With its shapely forged-alloy arms, M30 alloy spindle, LevaTime II X-Spider and chainring, the Alba is ready for anything.LevaTime X-Spider and ChainringThis 1x10/11 speed chainset features a LevaTime II (LT2) X-Spider and chainring that's the product of years of relentless testing and tweaking. This all new LT2 X-Spider is even stiffer than the original generation X-Spider. With a new forging design to support the new LT2 5mm plate big rings, this direct mount model keeps things flex-free when it's time to put the power down.One Shot ForgingAt Praxis Works, the primary reason it forges its chainring is that it allows them to create dramatically shaped teeth and ramping surfaces. The brand's “One Shot” forging process allows it to make these shapes, and at the same time, create a harder and tougher ring than the competition's machined rings. Imagine for a second, you have a big hammer and you are hitting a cold block of metal trying to shape it. Now, imagine the hammer is the size of a car and when you swing that hammer you've got hundreds to thousands of tons of pressure behind it. It's a very intense and difficult process that requires a great deal of tooling know-how. This manufacturing process happens to be the brand's specialty.M24 Bottom BracketThis chainset comes complete with a press fit M24/GxP bottom bracket for installing a M24/GxP spindle crank into a BB86 Road or BB90/BB92 MTN Frame. Praxis M24 bottom brackets have a 24mm Drive and a 22mm NonDrive Bearing. These are specifically made for use with Praxis M24 spindle cranks or SRAM GxP spindle cranks. A drive-side wave washer is used for preload of the bearings. This specific press fit M24 bottom bracket is made to be installed in a BB86 Road or BB90/92 MTN frame.Born and based in the cycling mecca of Santa Cruz, California, Praxis creates and manufactures some of the best bicycle parts on the globe.Please note: Image is for demonstration purposes only, actual chainset contains an M24 bottom bracket.Features: Crankarm Material: Forged Aluminium Chainring Material: Cold-Forged 7075 T6 Aluminium Use: Road Mount: Direct Mount Speed: 10/11 speed Tooth Count: 40T Q-Factor: 147mm Chainline: 45.4mm Number of Chainrings: 1 Chainring Included: Yes Bottom Bracket Included: Yes (M24) Weight: 800g (172.5mm option approx)Manufacturer's Part Numbers: 89222983 Black 40T 165mm 89222979 Black 40T 170mm 89222980 Black 40T 172.5mm 89222981 Black 40T 175mmBuy Praxis Works Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Great value Tourney road chainsetSG-X chainrings feature strategically placed chain pick-up pins and tooth profiles to ensure fast and positive shiftingDesigned to fit square tapered bottom bracket spindleCompatible with 7/8-speed Shimano chainsLightweight aluminium crank armsHard-wearing steel chainrings.
Great value Deore M6130 2-piece design chainset for 12-speed Dyna-Sys MTB HG-X transmissions Forged crank arms rigid whilst being incredibly strong and durable HollowTech II integrated bottom bracket design uses a wide bearing placement with a large axle diameter for increased stiffness, efficiency and added durability Lightweight aluminium chainring We recommend that the bottom bracket is initially installed by a bike shop to ensure perfect facing and fit 56.5 mm chain line for use with 157 mm O.L.D. frames Direct mount chain ring 12-speed Dyna-Sys compatible
The SRAM XX1 Eagle 12 speed chain’s links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear on chainrings and cassette cogs. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. Hard Chrome technology extends the chain’s optimal performance life, and a Titanium Nitride coating on the Gold and Black models decreases corrosion and further reduces friction. It might look normal from the outside, but the engineering inside the SRAM XX1 Eagle 12 Speed Chain (Black) makes possible a gear range previously found only in 2-chainring drivetrains. Please Note: This chain is the only compatible option for the SRAM Eagle. Technologies: PowerLock: SRAM chain engineers developed PowerLock as a tool-free, sure, and consistent way to connect our chains. While PowerLock does not require special tools for installation, the especially tight tolerances of 10, 11 and 12 speed drivetrains mandate that each PowerLock is good for a one-time application only. Flow Link: Ultra-smooth chain inner-plates are completely devoid of square edges, resulting in a chain that engages the cassette and chainring with far less friction, for quieter performance and better wear life. The design allows a narrower overall profile that can withstand greater angles, and also allows for a flatter outer-plate, which means more consistent chain riveting and enhanced overall strength. Hard Chrome: The SRAM Hard Chrome chain has four times the elongation (wear) resistance to our other chains. This is due to the new finishing process on the inner links and rollers. Pushpin strength and ultimate strength are equivalent to SRAM's current chains, but the Hard Chrome chain lasts longer and is just as strong.
Strong and lightweight to cope with the demands of rigorous riding, this Eagle DUB chainset is designed to be durable and stiff, with every part of the crankset working together to ensure efficient and effective performance with every rotation. Utilising the aggressively toothed X-Sync 2 chainring, the aluminium-built spider keeps a superb hold on your chain and provides a smooth feel as you propel yourself to greatness. The 7000 series aluminium crank arms allow for explosive power transfer as you rise uphill and sprint along the straight, with the wider BOOST design chainline allowing you to make the most of your larger frame and tyres to push your off-road rides to the very limit. Technologies X-Sync 2: X-Sync 2 Eagle is the next evolution of SRAM X-Sync technology. The aggressive tooth design provides better chain retention for a smoother, more efficient pedal feel. With a focus on long wear-life, the X-Sync Eagle design reduces friction and the accumulation of mud, grit and grime. DUB Technology: The relationship between bottom bracket spindle and bearing is the core of DUB™ technology. It’s where stiffness meets durability. SRAM took it a step beyond conventional thinking and made everything simpler, by better integrating the relationship between chainring, crank, spindle and bottom bracket. It’s this clear system approach that equals better drivetrain performance.
Great value Deore M6100 2-piece design chainset for 12-speed Dyna-Sys MTB HG-X transmissions Forged crank arms rigid whilst being incredibly strong and durable HollowTech II integrated bottom bracket design uses a wide bearing placement with a large axle diameter for increased stiffness, efficiency and added durability Lightweight aluminium chainring We recommend that the bottom bracket is initially installed by a bike shop to ensure perfect facing and fit 52 mm chain line for use with 135 /142 mm O.L.D. frames Direct mount chain ring 12-speed Dyna-Sys compatible
Shimano Deore M6000 10 Speed MTB Triple ChainsetThe Shimano Deore M6000 10 Speed MTB Triple Chainset is perfect for tackling long-distance MTB (mountain bike) and XC (cross-country) terrains thanks to its varied gear range. The chainset boasts the same top-quality of Shimano's high-end components, at a cost that won't break the bank. Smooth ShiftingSmooth and durable power transfer is provided by the two-piece "Hollowtech II” bottom bracket system, and quick and crisp shifting action is ensured thanks to the “Dyna-Sys” chainrings. Even under load, you’ll be able to shift with ease and maintain momentum as you crest those climbs with a smile on your face!Features: Material: Crank Arm: Aluminium; Outer Chainring: Aluminium; Inner Chainring: Glass Fibre/Steel Speed: 3x10-Speed Axle Profile: Hollowtech II BCD: 96/64 mm, 4-arm asymmetrical Recommended Chain: HG-X 10-Speed Chainline: 50mm Use: MTB/XCOptimised gear combinations and ratios for trail riding Designed for an external bottom bracket system that is lightweight and incredibly strong Lightweight and rigid steel bottom bracket axle Smooth-shifting rhythm helps maintain speed and acceleration over challenging terrain Close step tooth profile for smooth shifting Stable shifting performance in any suspension position Single spike structure for stable shifting Dyna-Sys compatible Bottom bracket not includedTechnologies:Hollowtech II: The concept of Hollowtech II technology is focused on producing a superior crankset, which will maximise a rider’s power transfer. The rigidity of the crankset ensures pedalling efficiency while its low weight, a key element of the crankset, aids in cycling longer distances. Naturally, Shimano strove for the optimum balance between the conflicting needs of stiffness while producing a lightweight crank. For most frames, Hollowtech II with its 24mm axle can set the bearing position outside of the frame to provide better weight distribution and more stability. Hollowtech II bottom brackets also have high-precision seals to increase durability, maintaining excellent rotating performance for long periods.A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This crankset benefits from the technology of Shimano’s top-end models, yet it still offers outstanding value for money. Smooth Shifting Smooth and durable power transfer is provided by the two piece "Hollowtech II” bottom bracket system, and quick and crisp shifting action is ensured thanks to the “Dyna-Sys” chainrings. Even under load, you’ll be able to shift with ease and maintain momentum as you crest those climbs with a smile on your face! Additional Features: Close step tooth profile for smooth shifting Stable shifting performance in any suspension position Single spike structure for stable shifting Dyna-Sys compatible
Shimano R3000 Sora 9 Speed ChainsetAdopting modern technologies from top-end models, the Shimano R3000 Sora 9 Speed Chainset delivers reliable, efficient power delivery and gear shifts on every ride. It's the ideal replacement or upgrade for your road bike's 2x9 speed drivetrain.This crankset features a tough aluminium crank arm material with a steel axle, making it ideal for handling the increased pressure from fitness riding and longer journeys. Its advanced chainrings ensure fast and responsive indexed shifting as you travel from the smooth city pavement to the countryside. One final highlight is this model's 2-piece crank design that offers increased rigidity and less weight.Features: Crank Arm Material: Aluminium Crank Axle Material: Steel Chainring Material: Large: Aluminium; Middle: Steel and Small: Steel Speed: 2x9-Speed Use: Road, Fitness Number of Chainrings: 2 Bottom Bracket Compatibility: Outboard threaded or pressfit Hollowtech II types Recommended Bottom Bracket: Pressfit: BB-RS500-PB; Threaded (Normal): BB-RS500 Bottom Bracket Included: No 2-piece Construction: Yes Chainline: 43.5mm Chainring Combination: 50/34T Compatible Chain: HG 9-Speed Crank Arm Length: Multiple options available to select Gear Arms: 4 Chain Guard / Bash Guard: Sold separately BCD: 110/74mm Q-Factor: 150mm Weight: 1180g (without bottom bracket) A 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.