Designed by pro riders, mechanics and scientists, Peaty’s Rim Job has been developed from the ground up as a bicycle rim tape. The super high tensile strength tape is primed with a bespoke adhesive which clings like s**t to a blanket. An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit.Do you struggle to find the hole? No problem! Just hold your rim up to the light and the tape’s semi-transparent finish will illuminate the way.Fitting instructions:01) Remove tyre and any old rim tape,02) Clean and degrease rim thoroughly,03) Ensure rim is completely dry before application,04) Press tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air,05) Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut,06) Use a small spike to pierce the tape in the centre of the valve hole,07) Remove dust cap and Push valve through the valve hole,08) Apply lock ring tightly by hand, ensuring there are no air gaps,09) Refit tyre, add Peaty’s Tubeless sealant, inflate Tyre,10) Ride!.
SRAM XX1 Freehub Body & Endcap Kit For Roval WheelsEndcap kit available in three sizes: 135mm QR, 142mm, 142+,Freehub includes endcap kit.
The right wheel and tire combination can improve your skills and upgrade the performance of your E-bike on challenging off-road terrain. The new E-Deemax S is built specifically for E-bikes and has some unique technologies to help you ride smoother and have more fun on the trail.Our patented PFP technology (Pinch Flat Protection) features rims with a wider contact surface at the top of sidewall, which significantly reduces the risk of tire cuts and punctures. The wider 35mm rims allow you to run lower tire pressure for better traction, and the rims pair perfectly with trail tires ranging from 2.6 to 3.2-inch. Our patented Fore technology features a fully sealed upper rim bridge that eliminates the need for rim tape, making it the easiest system for mounting and changing tubeless tires.ISM machining removes material from the rims in strategic areas to minimize weight without compromising strength, and our new Black Shield finish protects the rims against impacts and scratches. We use 28 straight-pull spokes (same spoke length throughout) for a strong connection between the rim and hub, which has our ultra-reliable ID360 double ratchet system for quick engagement and acceleration. Set up for either 6-bolt or center lock disc mounts, these 27.5” wheels are available for Shimano HG9, XD and Micro Spline freewheel bodies and come with UST tubeless valves, spare spokes and accessories.KEY BENEFITSReduced risk of flats, stronger rim profilePFP (Pinch Flat Protection) rim sidewalls have a wider contact surface at the top of sidewall, which significantly minimizes the risk of tire cuts and punctures. Super strong rim (ASTM 5) gives you the confidence to push your limits on rough terrain.Increased traction, stability and controlWider 35mm (internal) rim is optimized for lower tire pressure to maximize your grip, efficiency and comfort on the trail. Rim profile is optimized for modern trail tires from 2.6 to 3.2".Most user-friendly tubeless system Fully sealed rim with no rim tape makes it easy to mount and change tubeless tires. Leaving the upper rim bridge intact boosts the stiffness and the durability of the rim.
Designed to handle everything from backcountry rock gardens to heavy days at the bike park, the Traverse is the definitive all-mountain wheel. A super-light, super-tough alloy rim is combined with refined and ultra-dependable hub and spoke technology for a wheel that can conquer any mountainRim Type: Traverse Alloy, 27.5, Disc Brake, Tubeless Ready, Zero Bead Hook Design,Rim Details: 22mm Depth, 34mm External Width, 30mm Internal Width,Hub: Roval Step Flange Hub (SP19151/JFM02R) 6-Bolt, DT Swiss Ratchet LN 18t (20 deg) , 110x15mm & 148x12mm thru-axle, SRAM XD Freehub, (Convertible freehub and endcaps),Bearing Type: Sealed Steel Cartridge Bearing,Spokes: DT Swiss Competition Race J-Bend, Front: Two-Cross 28 count, L: 266mm, R: 266mm; Rear: Two-cross 28 count, L: DS 266m NDS 266mm,Nipple: DT Swiss Hex Prolock Brass 2.0x14mm,Tire Size: 1.95" - 3.0"; Max Pressure: 40 psi,Weight: Wheelset 1,830g (including tubeless rim tape and tubeless valve),Assembly Method: Hand built at every step; to the last nipple turn.,Extras: 19 and 31mm OD end cap options included, Roval tubeless tape and tubeless valve, Spare Spoke and Nipple Kit, System Weight Limit: 240lbs / 109kg;.
Strong, reliable and tubeless ready, this modern XC wheel lives up to the legendary Crossmax name.Key Features:Efficient, strong and reliable XC performance.,New wider (25mm internal) sleeved rim design is lighter without compromising strength. 24 straight-pull spokes ensure optimum stiffness and reliability.,Smoother ride, increased traction and a reduced risk of punctures.,UST design and tubeless rim tape makes it easy to set up tubeless ready tires.,Trickle-down technology from high-end Mavic XC wheels.,Reliable ID 360 freehub system and lightweight rim design.,The name Crossmax has a long history in the world of XC riding and racing..This Tubeless Ready wheelset lives up to its name with many of the same features and technologies as pro-level XC race wheels, but at a far more attainable price. One of the key factors is our UST technology, which allows for easy setup of tubeless ready tires and gives you all the associated benefits including better traction and control, a smoother ride quality and a reduced risk of punctures. The rim design features a 25mm internal width with a hookless profile, a sensible setup for tubeless XC tires.The wheels are built with 24 straight-pull spokes to save weight and maximize wheel strength, so you get just the right balance of efficiency and durability. Power transfer is handled by our new ID 360 freehub, which is compatible with all common axle standards. It’s available in Boost or Non-Boost hub widths and can be used with quick-release or thru-axle setups with included adapters.
The passion of everyday life, the alarm clock that goes off for your morning training session, those "stolen" hours before dinner and your long Saturday outings with friends: adventure, goals, flow. These wheels are ideal for a variety of different situations, so we put ourselves in the shoes of those who might choose them and asked ourselves: what do these wheels need?They're reliable, well-balanced in terms of weight and stiff enough for cyclists to clock up the kilometres with complete peace of mind. With these wheels cyclists can focus on enjoying their surroundings, drinking in the view behind each bend while keeping up with their seasonal schedule. Fulcrum's R&D department have studied the market and produced their interpretation, creating Cross Country wheels to meet the demands of today's cycling routes. The wheels are ready to use and feature a wider groove with solid, sophisticated spoking. These wheels have a definite wow factor and are a cut above the rest. Key Features:Tyre Type: 2 Way - Fit Ready,Discipline: Cross country / Marathon,Tyre Size: 29 inch,Weight: 1800 g., Boost 1815 g.,Rim material: Aluminium,Rim material details: Aluminium,Rim height Front and rear: 20 mm,Rim width: 28.5 mm,Inner rim width (channel): ETRTO 23C,Tyre Width: From 2.0” to 2.35”,Front axle compatibility: QR/HH15 + Boost version,Rear Axle compatibility: QR/HH12 + Boost version,Front wheel spokes: 28-Left 14-Right 14,Rear wheel spokes: 28-Left 14-Right 14,Spokes Material: Stainless steel,Spokes Profile technology: Rounded, straight pull,Nipples: Aluminium.
Specification:Orientation (wheels): Front,Size (wheels): 700c,Rim construction: Carbon,Tire compatibility: Clincher Tubeless Ready,Rim depth: 58mm,Surface texture: ABLC SawTooth,Brake compatibility: Rim,Rim - inside width: 19mm,Rim profile: Symmetrical,Rim finish: UD fiber, adhesive decals,Color (Decal): Standard,Nipple material: Aluminum,Nipple anti-rotation: Sapim Secure-Loc,Spoke type: CX-Ray - Black,Spoke count: 18,Spoke pattern: Radial,Hub: ZR1 Disc Brake,Driver body type: n/a,Color (hub): Black,Axle type (Wheels): QR 100 Caps (dia. 19mm),Axle material: Aluminum front & rear,Bearings: Cartridge - Steel,Driver Mechanism: n/a,Driver body material: n/a,Max tire pressure: 125psi,Max recommended rider weight: 250lbs.
Whether you’re an enduro racer or an all-mountain ripper, you need a wheel that delivers the perfect balance of strength, stiffness and lightweight agility—so you can push it on rowdy descents and still hammer up climbs with efficiency.The Deemax Pro, weighing 1930g, gives you the confidence to nail new lines and carry more speed on technical downhill terrain. It was developed with input from top pro racers, including 2017/2018 Enduro World Series champion Sam Hill.The rims are lightweight, yet also strong enough to withstand the abuses of hard-charging trail riding. Our innovative ISM 4D manufacturing process removes any unnecessary material from the rim. This process minimizes weight and reduces inertia while leaving enough material on the sidewalls and spoke bed where most of the stresses apply.The internal rim width, which affects tire shape and size, is 28mm based on the choice of our pro riders. The result is a wheel that’s strong and light for acceleration and control on the most aggressive trails.The wheel is laced with 24 Zicral spokes for maximum power and brake torque transfer. The rear hub features our fast-engaging ID 360 freehub and is compatible with any drivetrain setup. The front hub is 15x100/20x110 or 15x110 (Boost) compatible, and the rear wheel comes in 12x142 or 12x148 (Boost).Key Features:Ultra-responsive ride quality.,28mm wide (internal) rims proven fastest through extensive testing with top pro enduro racers.,ISM 4D construction, Isopulse lacing and 24 Zicral spokes deliver maximum acceleration in a lightweight package.,Confident handling and durability you can count on.,ISM 4D rim technology minimizes weight without sacrificing strength.,Maxtal alloy rims and Zicral spokes for added strength and durability.,UST Tubeless for added traction and control.,User-friendly tubeless technology for better traction and control with reduced risk of punctures.,Wheelset ships with UST valves..CompatibilityFreewheel: Shimano Micro SplineRear axle: 12mm thru axle, convertible to Quick Release with optional adaptersFreewheel: Shimano/Sram or XDHubsFront bearings : adjustable sealed cartridge bearings (QRM+), Rear bearings : auto adjust sealed cartridge bearings (QRM Auto)Freewheel: Instant Drive 360Front and rear bodies: aluminumCompatible Adapters and freewheel bodiesID360 Shimano Micro Spline alloy freewheel body (LV3990100)Boost : 12x148 rear axle adapters (LV2510700 - Delivered with the wheel)ID360 XD freewheel body (LV3740100)ID360 Shimano alloy freewheel body (LV3780100)ID360 Shimano steel freewheel body (LV3790100)Intended UseRecommended tyre sizes: 46mm to 64mm (1.8" to 2.5")For a longer longevity of the wheel, Mavic recommends that the total weight supported by the wheels don't exceed 120kg, bike includedASTM CATEGORY 4 : ENDURO AND TRAIL RIDINGVersionsFreewheel: Shimano/Sram or XDHub width : Boost (front 110, rear 148) or Non-Boost (front 100, rear 135/142)Disc standard : 6 Bolts onlyColor: Black only
Features:A great value replacement rim brake road wheel,Alloy 100mm quick release front hub,Double wall aluminium rim 622 x 15,32 plain gauge DT Swiss stainless steel spokes black,Laced in a traditional 3 cross pattern for a proven balance of forgiveness, stiffness and strength.
A perfect choice for fast, flat road races or windy triathlons, this wind-slicing carbon wheel features progressive aerodynamic technology and a stable ride quality. The rim is engineered with a NACA profile that’s 65mm deep and 26mm wide.The wide, rounded shape of the Cosmic SL 65 rim was developed through countless hours in the wind-tunnel to produce the lowest possible drag without sacrificing stability in crosswinds. New refined spokes make it 80g lighter than its predecessor, the Comete Pro Carbon UST Disc. The new rim bed shape makes it easier than ever to fit tubeless or tube type tires. Our new Infinity hub platform optimizes the spoke lacing for efficient power transfer through highly controlled spoke tension. And the Instant Drive 360 freewheel coupled with automatic bearing preload (QRM Auto) provides fast engagement, high stiffness and extra durability.These wheels are engineered specifically for disc brakes, with an optimized spoke count and lacing. They are offered in Center Lock only and are compatible with 12mm thru-axles that convert to quick release with included adapters. They are available for Shimano or SRAM XD-R cassettes and can convert to Campagnolo with an optional driver body.Proven aero speed65mm deep/26mm wide NACA rim profile for low drag and stability in cross windsOptimized for 25mm tiresFlat spokesFaster acceleration and better controlReduced inertia of the lightweight rim delivers instant accelerationLighter spokes make the wheel feel snappierDisc-brake specific spoke lacing, thru-axle compatibleImproved UST Road delivers more speed, comfort and control in an easy to use tubeless systemNo tubes means less friction, better efficiency and grip, and a reduced risk of puncturesNew rim bed shape makes it easier to mount and change tires
CNC machined, ergonomic levers securely fixing your wheelsKey FeaturesLaser etched, anodized 2014 T6 aluminium,Available as singles or pairs,Stainless steel rods available in 100, 130, 135, 170 and 190mm,Available in Black, Silver, Red, Blue, Purple and Orange."Secure fixings for your wheels"Quick Release Tech SpecsDifferent lengths available to suit Road, MTB and Fatbikes,Colours: Black, Silver, Red, Blue, Purple and Orange,Material 2014 T6 Aluminium levers and Stainless Steel rods,Available in 100, 130, 135, 170 and 190mm lengths,Available as singles or pairs,Weights: Single from 55g// Pair from 119g.
The best value for money on the all road marketFeatures6106 aluminum alloyPinnedTraditional drillingUB ControlSingle eyeletClincherExternal wear indicatorDimensionsETRTO size: 622 x 19CRecommended tyre widths: 28 to 47 mmValve hole diameter: 8.5 mm, supplied with valve adapterRecommended rim tape (width x thickness): 20 x 0.6Recommended nipple length: 12 mmAvailable colors / VersionsBlack 32 holesTechnologiesUB ControlFiltersDrilling: 32Drilling: 36tyre type: clincherThis pin joined rim has been optimized to offer the best quality/price ratio. Its external wear indicator makes it reassuring for all those who discover the world of cycling.Brake track 9Circumference 1991Height 17.5Nipple contact point (ERD) 601.5Weight 700C (grams) 540Width 24
Eliminate those rattling valves for good! Simply sticks over your valve.Key Features:Durable rubber ensure ValveGaurds are re-usable when changing tubes.The adhesive is gentle and can be used on any rims, including carbon.Includes 6 ValveGuards and 4 oval/2 thin FrameGuards to prevent cable rub.Made in the UK..
Synthesis level 11 enduro wheelset with 29" front wheel and 27.5" rear wheel.Front and rear specific rims offer stiffness and compliance characteristics where they are rewarded best, while front and rear specific inner rim widths are optimized for wider tires in the front and narrower tires in the rearCrankbrothers has partnered with Industry Nine for the Synthesis 11 hub. Handbuilt in Asheville, NC, i9's Hydra hub has near instantaneous engagement offering previously unheard of responsiveness.Specific spoke counts, weights, and tensions are employed on front and rear wheels to enhance the tuned wheel system and riding experience. Synthesis wheels are built using the highest quality Sapim stainless steel spokes. Synthesis 11 series wheels are built with bladed spokes for further weight savings.Key Features: Mountain bike tuned carbon wheel system for e-bikes. , Front and rear specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. , Compliant tuned front wheel improves handling and maximizes grip and control in turns. , Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed.,.Specifications: Engagement: 17º six pawls, ETRTO: 622mm (29), Hub: crankbrothers Synthesis standard, Inner Rim Width: Front 31.5mm, Rear 31.5mm, Outer Rim Width: Front 38.7mm, Rear 39.5mm, Rim Height 18.75mm, Spoke Count: Front 32, Rear 32, Spoke Type:, Warranty: Lifetime (rim only).
Most tubeless tape has as least one weakness. It doesn't stick well, leaves a residue when removed, is too thick or too thin or tears during install. Our tape balances the needs of tubeless users with a purpose designed tape. Stretches for easy install and snug valve fit, won't tear easily, will not leave a residue when removed and comes in perfect widths for e*thirteen rims.8m roll tapes 2 wheels,40m roll tapes 10 wheels.
The crankbrothers tuned wheel system now includes an aluminium range.Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stif rear wheel to achieve optimum ride characteristics for each. The compliant front wheel improves handling and control in the turns, while a stif rear wheel enhances stability and trackinh at speed. In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight.The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible. There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement. Enduro and XCT rim only availability also gives the option for custom wheel building.Front rimInner rim width - 31.5,Spoke count - 28.Rear rimInner rim width - 29.5,Spoke count - 32.
The crankbrothers tuned wheel system now includes an aluminium range.Crankbrothers synthesis wheels take a new approach to wheel systems, focusing on a compliant front wheel with a stif rear wheel to achieve optimum ride characteristics for each. The compliant front wheel improves handling and control in the turns, while a stif rear wheel enhances stability and tracking at speed. In the alloy range, these differing characteristics are achieved by variations chosen in spoke tension, spoke weight, spoke count, rim width and rim weight.The range features Enduro, XC/Trail and E-bike models, aiming to accommodate as many riders as possible. There are 2 hub options available on enduro and XCT models - a crankbrothers hub and an i9 1/1 hub, providing 4 degrees of engagement. Enduro and XCT rim only availability also gives the option for custom wheel building.Rear wheelInner rim width - 29.5,Spoke count - 32,Spokes - Sapim Race,Weight - 1018g 27.5 / 1048g 29,Hub engagement - 4 degrees.
Game changer! The Quick Fill Plasma Valve connects directly with the sealant bottle tube for direct injection after mounting the tire, resulting in mess free installation. The Valve allows riders to add sealant without breaking the tire bead, and without the need for tools!Key Features:Resists build up and prevents sealant from clogging and congealing at the valve. No more sticky mess!,Oversize stem allows for high volume flow, ease of inflation and pressure adjustment.,Two-piece body and removable valve enables easy cleaning to maintain optimal performance.,CNC machined. Aluminium construction..Intergalactic is a special PVD coating that’s twice as durable as anodised.Compatibility: Compatible with Cushcore™ and other tire inserts which sit in the rim wellIncluded: Tubeless valve x2Length: Short stem: 19-27mm (for use on all e*thirteen TRS/LG1 rims) // Long stem: 27-37mm (for use on all e*thirteen XCX rims)
Replacement Freehub body for I9 Hydra, I9 1/1, and Crankbrothers HubsAvailable in HG, XD, and Micro Spline drivers