The new Gravity gold standard and raced to EWS victory by Ritchie Rude before it was even released!Key Features:The EX 511 offers the same near legendary durability and strength to weight ratio of the EX 471 but with a full 30mm internal width.The tubeless ready optimized rim bed provides fast tire installation, a great tire fit, and quick trouble-free tubeless setup.The DT Swiss welding process leaves an extremely consistent and strong weld joint.The included PHR washers and convex Squorx nipples naturally align perfectly with your chosen spokes, increasing stiffness and durability with no weight penalty over traditional eyeleted rims.Unique process for the black coating produces a tough and durable finish.Available in both 28 and 32 hole count.ERD 563 mm (27.5") or 601 (29") including washers.Outer width 35 mm Inner width 30 mm.Height 21 mm.Weight 535 grams (27.5") or 570 grams (29").
E-MTB-friendly toughness at a budget-friendly price; the H 1900's have long been the choice for EMTB riders looking for improved reliability and the latest versions have been upgraded with Ratchet LN technology to provide even more trouble-free lapsE-MTB's are tough on wheels, really tough, not only is there the added weight and higher maximum drive torque but E-MTB riders tend to ride further and more frequently, this adds up to a real challenge for anyone looking to design a truly durable wheel for long term E-MTB use,The result is DT's mission Hybrid, the first wheel engineering project to look specifically at the challenges of heavy duty E-MTB use for wheels,So, what's changed? the short answer... Everything!,The H 1900's hub shells are oversized to improve overall stiffness and the rear hub contains an 18-tooth ratchet LN freehub system, by far and away the most reliable drive mechanism available at this price point,The sleeved alloy rims have reinforced spoke beds to resist fatigue and handle high loads for long periods of time,The straight pull spokes are custom made for Hybrid with an oversized 2.35 mm hub interface designed to protect one of the key points of stress on any wheel,In order for a wheel to pass as Hybrid certified in DT's inhouse testing lab it has to survive 50% more lifecycles, its spokes and rims have to endure 20% higher load tests and the bearings must be able to handle almost twice the maximum load of a standard wheel,Whilst intended for E-MTB use, the Hybrid range is also ideal for larger riders, bike packers or anyone looking for a really durable wheelset with a high weight limit,Available in a 30 mm internal width to support modern high volume trail rubber,System weight limit: 150KG, Come with DT tubeless rim tape and valves included.
Key Features: The DT Swiss XM 481 rim has a full 30 mm internal profile, ideal for running high-volume rubber at low pressures, Strength Boost Welding Technology creates a perfectly welded join for a durable, reliable rim, The rim bed is tubeless-ready and optimized to provide fast tire installation, a great tire fit and quick trouble-free tubeless setup, Please be aware that this rim is a lightweight XM designated rim designed for trail use, those looking for a rim suitable for more gravity focused riding are advised to check out the super strong EX 471 or EX 511, The included PHR washers and convex Squorx nipples naturally align perfectly with your chosen spokes, increasing stiffness and durability with no weight penalty over traditional eyeleted rims, Unique process for the black coating produces a tough and durable finish, Available in both 28 and 32 hole count in 27.5 and 29 inch, ERD 563 mm (27.5 inch) or 601 mm (29 inch), Outer width 35 mm Inner width 30 mm, Height 21 mm, Weight 490 g (27.5 inch) or 525 g (29 inch).
A true workhorse, the HX 1700 is designed from the ground up to be the most reliable and dependable choice for those who want their E-MTB out on the trail where it belongs, not in the workstandE-MTB's are tough on wheels, really tough, not only is there the added weight and higher maximum drive torque but E-MTB riders tend to ride further and more frequently, this adds up to a real challenge for anyone looking to design a truly durable wheel for long term E-MTB use,The result is DT's mission Hybrid, the first wheel engineering project to look specifically at the challenges of heavy duty E-MTB use for wheels,So, what's changed? the short answer... Everything!,At the core of the HX 1700' are a custom version of DT's legendarily reliable 350 hubs with E-MTB-optimised 24-tooth ratchets and oversized hub shells for improved load transfer,The welded alloy rims have reinforced spoke beds to resist fatigue and handle high loads for long periods of time,The straight pull spokes are custom made for Hybrid with an oversized 2.35 mm hub interface designed to protect one of the key points of stress on any wheel,In order for a wheel to pass as Hybrid certified in DT's inhouse testing lab it has to survive 50% more lifecycles, its spokes and rims have to endure 20% higher load tests and the bearings must be able to handle almost twice the maximum load of a standard wheel,Whilst intended for E-MTB use, the Hybrid range is also ideal for larger riders, bike packers or anyone looking for a really durable wheelset with a high weight limit,Available in a 30 mm internal width to support modern high volume trail rubber,System weight limit: 150KG, Come with DT tubeless rim tape and valves included.
A true workhorse, the HX 1700 is designed from the ground up to be the most reliable and dependable choice for those who want their E-MTB out on the trail where it belongs, not in the workstandE-MTB's are tough on wheels, really tough, not only is there the added weight and higher maximum drive torque but E-MTB riders tend to ride further and more frequently, this adds up to a real challenge for anyone looking to design a truly durable wheel for long term E-MTB use,The result is DT's mission Hybrid, the first wheel engineering project to look specifically at the challenges of heavy duty E-MTB use for wheels,So, what's changed? the short answer... Everything!,At the core of the HX 1700' are a custom version of DT's legendarily reliable 350 hubs with E-MTB-optimised 24-tooth ratchets and oversized hub shells for improved load transfer,The welded alloy rims have reinforced spoke beds to resist fatigue and handle high loads for long periods of time,The straight pull spokes are custom made for Hybrid with an oversized 2.35 mm hub interface designed to protect one of the key points of stress on any wheel,In order for a wheel to pass as Hybrid certified in DT's inhouse testing lab it has to survive 50% more lifecycles, its spokes and rims have to endure 20% higher load tests and the bearings must be able to handle almost twice the maximum load of a standard wheel,Whilst intended for E-MTB use, the Hybrid range is also ideal for larger riders, bike packers or anyone looking for a really durable wheelset with a high weight limit,Available in a 30 mm internal width to support modern high volume trail rubber,System weight limit: 150KG, Come with DT tubeless rim tape and valves included.
E-MTB-friendly toughness at a budget-friendly price; the H 1900's have long been the choice for EMTB riders looking for improved reliability and the latest versions have been upgraded with Ratchet LN technology to provide even more trouble-free lapsE-MTB's are tough on wheels, really tough, not only is there the added weight and higher maximum drive torque but E-MTB riders tend to ride further and more frequently, this adds up to a real challenge for anyone looking to design a truly durable wheel for long term E-MTB use,The result is DT's mission Hybrid, the first wheel engineering project to look specifically at the challenges of heavy duty E-MTB use for wheels,So, what's changed? the short answer... Everything!,The H 1900's hub shells are oversized to improve overall stiffness and the rear hub contains an 18-tooth ratchet LN freehub system, by far and away the most reliable drive mechanism available at this price point,The sleeved alloy rims have reinforced spoke beds to resist fatigue and handle high loads for long periods of time,The straight pull spokes are custom made for Hybrid with an oversized 2.35 mm hub interface designed to protect one of the key points of stress on any wheel,In order for a wheel to pass as Hybrid certified in DT's inhouse testing lab it has to survive 50% more lifecycles, its spokes and rims have to endure 20% higher load tests and the bearings must be able to handle almost twice the maximum load of a standard wheel,Whilst intended for E-MTB use, the Hybrid range is also ideal for larger riders, bike packers or anyone looking for a really durable wheelset with a high weight limit,Available in a 30 mm internal width to support modern high volume trail rubber,System weight limit: 150KG, Come with DT tubeless rim tape and valves included.
The Ratchet LN upgrade kit enables the conversion of DT Swiss 3-pawl hubs to the renowned DT Ratchet freehub systemPawl freehub systems create relatively small engagement surfaces, which result in higher stress on the contact area. The Ratchet System is extremely reliable due to the simultaneous engagement of the ratchet faces, distributing the force evenly over a large area,In addition, the Ratchet System is modular, so the engagement angle can be increased by replacing the included 18 tooth ratchets with 36 or 54 tooth units (sold separately),DT are the original ratchet hub innovators, with over 25 years of development and refinement behind it no other manufacturer has matched DT's system for ease of service, reliability and durability,Tool-free servicing concept make maintenance quick and simple, even mid-ride in a pinch,LN system is specific to 370 hubs such as those found on 1900 series DT complete wheels, the freehubs are not compatible with standard Ratchet or Ratchet EXP hubs,Requires both a HBDT835 Ratchet ring nut tool and an HBDT5266 Pawl ringnut tool to install, DT recommends that this work is carried out by a qualified mechanic.
End Caps - Genuine DT Swiss replacement part, Converts into 12 mm thru-axle.
E-MTB-friendly toughness at a budget-friendly price; the H 1900's have long been the choice for EMTB riders looking for improved reliability and the latest versions have been upgraded with Ratchet LN technology to provide even more trouble-free lapsE-MTB's are tough on wheels, really tough, not only is there the added weight and higher maximum drive torque but E-MTB riders tend to ride further and more frequently, this adds up to a real challenge for anyone looking to design a truly durable wheel for long term E-MTB use,The result is DT's mission Hybrid, the first wheel engineering project to look specifically at the challenges of heavy duty E-MTB use for wheels,So, what's changed? the short answer... Everything!,The H 1900's hub shells are oversized to improve overall stiffness and the rear hub contains an 18-tooth ratchet LN freehub system, by far and away the most reliable drive mechanism available at this price point,The sleeved alloy rims have reinforced spoke beds to resist fatigue and handle high loads for long periods of time,The straight pull spokes are custom made for Hybrid with an oversized 2.35 mm hub interface designed to protect one of the key points of stress on any wheel,In order for a wheel to pass as Hybrid certified in DT's inhouse testing lab it has to survive 50% more lifecycles, its spokes and rims have to endure 20% higher load tests and the bearings must be able to handle almost twice the maximum load of a standard wheel,Whilst intended for E-MTB use, the Hybrid range is also ideal for larger riders, bike packers or anyone looking for a really durable wheelset with a high weight limit,Available in a 30 mm internal width to support modern high volume trail rubber,System weight limit: 150KG, Come with DT tubeless rim tape and valves included.
Key Features:An inexpensive all round 20 mm wide (internal) road disc brake rim, ideal for those looking to convert to wider, tubeless tyres on a budget,Can be run either with standard clinchers or road tubeless tyres using DT Swiss tubeless tape and valves,Unique process for the black coating produces a tough and durable finish,Suggested maximum system weight of 120 KG, those looking for a wider road rim for heavier riders or for mixed terrain riding are advised to consider the suitably tough RR 521 DB's,Presta drilling,ERD: 597 mm,Outer width: 24 mm, Inner Width: 20 mm,Height: 23 mm,Max spoke tension: 1200 N,Weight: 450 grams,ColourBlack,DisciplineRoad.
The most sure-footed, all-condition Aero wheels, the ERC range redefines stability!Back in 2016 DT broke new ground when they launched the ERC, the first truly aerodynamic wheel optimised for wider 25c tubeless tyres, but time doesn't stand still and even the best have to evolve, with a 22mm internal width and a rim profile optimised for 28-30c tyres the ERC has returned to the bleeding edgeBorn to produce the perfect high-speed wheelset for the real world of pot-holes and gusty lanes; DT's AERO+ design philosophy carefully balances handling in crosswinds with outright speed to produce the fastest possible durable all-conditions wheel,A product of DT's continued work with JP Ballard and his team at the GST wind tunnel in Immenstaad, Germany the new ERC rim profile offers the best possible mix of stability and speed, a hooked, 22mm wide design allows easy tubeless installation and opens up a huge range of tyre options,The ERC 1400's feature DT's 240 36-tooth Ratchet EXP hubs with DT's renowned sealed bearings, a superb mix of lightweight, stiffness, durability and ease of servicing,Maximum recommended system weight: 120 KG,Weight: 1498 grams a pair in 45mm and 1442 grams a pair in 35 mm.
The most sure-footed, all-condition Aero wheels, the ERC range redefines stability!Back in 2016 DT broke new ground when they launched the ERC, the first truly aerodynamic wheel optimised for wider 25c tubeless tyres, but time doesn't stand still and even the best have to evolve, with a 22mm internal width and a rim profile optimised for 28-30c tyres the ERC has returned to the bleeding edgeBorn to produce the perfect high-speed wheelset for the real world of pot-holes and gusty lanes; DT's AERO+ design philosophy carefully balances handling in crosswinds with outright speed to produce the fastest possible durable all-conditions wheel,A product of DT's continued work with JP Ballard and his team at the GST wind tunnel in Immenstaad, Germany the new ERC rim profile offers the best possible mix of stability and speed, a hooked, 22mm wide design allows easy tubeless installation and opens up a huge range of tyre options,The ERC 1400's feature DT's 240 36-tooth Ratchet EXP hubs with DT's renowned sealed bearings, a superb mix of lightweight, stiffness, durability and ease of servicing,Maximum recommended system weight: 120 KG,Weight: 1498 grams a pair in 45mm and 1442 grams a pair in 35 mm.
Key Features:The most popular wheels in the World Cup pits get brought bang up to date with a completely new rim design, 29 inch versions and new axle options,With DH tyre casings now being optimised for wider rims the new FR 1950s get a full 30 mm internal width offering more sidewall support and integrating better with leading protection inserts,The FR's renowned reliability and strength remain but despite the added width these wheel weigh in at a race-friendly 2,002 grams in 27.5 and just 2,108 grams in 29 inch, competetive with carbon offerings twice the price,For pure gravity racing, DT firmly believe that alloy remains king, offering better durability and a less fatiguing ride, our rims have delivered more DH World Cup and World Championship gold over the past decade than any other brand,DH wheels get a very hard life, which is why DT have specced classic J-bend butted Competition spokes, which are easy to locate and replace, handy if you're out in Morzine when something gets stuck in them,The hubs are DT's renowned 240's, which means you get low weight, our legendary custom bearings and DT's super reliable ratchet freehub system with easy too-free servicing,Front comes either with traditional DH 110 x 20 mm axles with converters for the 100 x 15 mm or in BOOST 20 mm with adaptors for standard 15 mm,Rear wheels are available in BOOST or DH specific 150 x 12 mm, the 150 mm version can be converted to 157 mm using kit HBDT2193C for Shimano or HBDTS3188S for SRAM XD,The rear wheels also come with both Shimano and SRAM XD freehubs for easy cross-compatibility,When bought as a pair they will include tubeless rim tape and valves.
The most sure-footed, all-condition Aero wheels, the ERC range redefines stability!Back in 2016 DT broke new ground when they launched the ERC, the first truly aerodynamic wheel optimised for wider 25c tubeless tyres, but time doesn't stand still and even the best have to evolve, with a 22mm internal width and a rim profile optimised for 28-30c tyres the ERC has returned to the bleeding edgeBorn to produce the perfect high-speed wheelset for the real world of pot-holes and gusty lanes; DT's AERO+ design philosophy carefully balances handling in crosswinds with outright speed to produce the fastest possible durable all-conditions wheel,A product of DT's continued work with JP Ballard and his team at the GST wind tunnel in Immenstaad, Germany the new ERC rim profile offers the best possible mix of stability and speed, a hooked, 22mm wide design allows easy tubeless installation and opens up a huge range of tyre options,The ERC 1400's feature DT's 240 36-tooth Ratchet EXP hubs with DT's renowned sealed bearings, a superb mix of lightweight, stiffness, durability and ease of servicing,Maximum recommended system weight: 120 KG,Weight: 1498 grams a pair in 45mm and 1442 grams a pair in 35 mm.
The Conquerors of Kona; the first generation ARC's were 3-times gold medal winners, victorious at the 2017, 2018 and 2019 Triathlon World Championships,Developments in disc brake and tyre technology have meant that even the best needed to evolve to take advantage of the latest tyre technology and the frames able to accept them,For the past 3 years, working with their aerodynamic R&D partners Swissside DT, have been continuously testing the latest generation of disc brake specific aerodynamic rims, hubs and spokes,The result is a family of new, 20 mm wide (internal) rim profiles optimised for 25-28c tubeless tyres that have been proven by extensive lab and real world testing to enable lower rolling resistance and improved crosswind handling whilst achieving incremental reductions in drag, even over the original ARC designs,As the leading hub engineering force on cycling, DT continue to push the boundaries of what can be expected from a racing hub, the new DICUT 180 with 36 tooth Ratchet EXP is the lightest, simplest, lowest drag road disc hub DT have ever made and still just as reliable and easy to service as the legendary 240,DT and Swissside's continuing leading-edge research into rotational drag and its effect on performance has lead to new, narrower Aerolite II and Aerocomp II spokes, unique to the ARC's these are what you can do when you design and make every part of the wheel and squeeze even more performance out of the system without the unproven reliability of less durable materials,The front wheel comes ready for 12 x 100 mm thru axles, rear comes ready for 12 x 142 mm thru axles, both come with Q/R converters,Maximum recommended system weight: 110 KG,Weights by rim depth: 80 mm: 1,820 grams a pair, 62 mm: 162 grams a pair, 50 mm: 1520 grams a pair.
Whilst DT's legendary superlight 240 hub gets all the glory, out there winning everything from Grand Tours to DH World Championships, no other hub powers as many rides as DT's value work horse the 350.Based heavily on the 240, the 350 has a less-machined hub shell and axle, saving considerable CNC time at the cost of a slightly higher weight,As a major upgrade, the latest 350 rear hubs now feature the 36-tooth SL ratchets, greatly speeding up engagement and reducing the weight of the rear hub,DT are the original ratchet hub innovators, with over 25 years of development and refinement behind it no other manufacturer has matched DT's system for ease of service. reliability and durability,Tool-free servicing concept make maintenance quick and simple, even mid-ride in a pinch,The same quad bearing system as used in the 240, with custom DT steel bearings and improved contact-free double flange sealing giving added durability and performance,This all comes together to make the 350 an exceptional performer at its price point; tough. light, fully rebuildable and renowned for its long term reliability, the 350 is the natural choice for almost any build.
Push your boundaries with the rim brake ARC 1400, bleeding-edge Aero performance and DT's renowned quality in a privateer-friendly racing packageFor the first time the rim brake ARC's now incorporate DT's Ratchet EXP technology, with fewer moving parts, lower weight, improved reliability and lower bearing drag, the 240 EXP hubs offer the reliability and ease of servicing you've come to expect from DT in a super light racing hub that sets the standardThe bespoke rim profile's 17 mm internal width is optimised for 23-25c tyres and tubeless compatible, available in 80, 62 or 48 m deep options to suit any racing situation,Maximum recommended system weight: 100 KG,Weight: 1738 grams a pair in 80mm, 1630 grams a pair in 62mm and 1573 grams a pair in 48 mm.
A combination of DT's renowned multi World Championship, World Cup and EWS winning EX 511 rims with the workhorse 350 ratchet hubs makes the E 1700 the perfect, long term wheel investment for regular gravity ridingKey Features:At the heart of the rear hub sits DT's Swiss-made 36-tooth SL ratchet, offering a 10 degree engagement angle; the optimum balance of rapid engagement, low pedal kickback and long-term reliability,30 mm internal width gives an ideal platform for current 2.3 - 2.5 inch tyres without adding unnecessary weight,As with all DT's E-rated Enduro rims, DT's custom extrusions beef up the edge of the rim to better resist rock-strikes whilst still minimising unnecessary bulk in less heavily loaded areas of the rim's structure, PHR system nipples remove stress risers and improve overall wheel stiffness; just 2 reasons why these rims have become the default choice for aggressive riders worldwide,With a weight per pair of 1886 grams in 27.5" and just 1978 grams in 29" the E 1700's offer a careful balance of durability and low weight for the climb back up,As one of the few manufactures of hubs, rims and spokes, the DT 1700's hubs and rims are designed from the ground up for DT's widely available straight pull, butted Competition spokes and designed as a system to offer superlative ride quality,350 hubs offer assured excellent durability and wide freehub compatibility along with easy, tool-free servicing,When bought as a pair they will include tubeless rim tape and tubeless valves,Maximum recommended system weight: 130 KG.Specifications:Colour Black,Discipline MTB,Freehub Shimano Micro Spline,Hub Width 148mm,Wheel Diameter 27.5 inches,Product Type Rear Wheels.
Key Features:The RWS Plug In system allows the easy and quick removal of the RWS lever from your DT Swiss axles,This leaves a super clean look which is lightweight, aerodynamic and less likely to get snagged on things,When in place the lever is secured by a locking mechanism and will not fall off, so you can choose to ride with the levers on or off,If the lever is not to hand, the axle can be installed or removed using a standard 6 mm allen key,The lever can be moved or repositioned simply by lifting the lever away from the bike and positioning as required ensuring that it sits neatly against the bike,Safe and easy operation,Up to 50% more clamping force than conventional quick release systems,100% disc brake compatible,No plastic or synthetic parts in the force flow,Clamping force not influenced by heat build up,Available in road and mountain bike specific versions,Lever made from aluminium,Dimensions: Total Length: 163 mm, Threaded Section: 13 mm, Thread 12 x 1.5 mm.
Key Features: Lightweight alloy tubeless valve, for 18-25 mm deep asymmetric road or MTB rims,Conical seal works with almost all rims, but is of course optimised for DT Swiss,Offset adaptor allows a clean install with asymmetrical rims that other valves can struggle with.,Wide bore for easy insertion of sealant and high air flow for initial inflation,Aerodynamic and easy to turn dust cap with integrated valve core extractor, please install valve with dust cap in place to ensure correct alignment.