This models integrated skid plate protects your chainrings from rocks, roots and literally any trail obstacle that requires you to roll over it. The top of the frame mounting area has a raised fin, which will also prevent the chain from dropping behind the chainring and into the bottom bracket shell area of the frame. If you prefer to run the V2 as a chain guide only, then the skid plate can be removed and the dual pulley chain retention device will still perform to the same high level.
This Funn E-Type chain guide is specifically designed for frames that have the two Shimano "E-type" or SRAM "Spec 3" front derailleur bolting points and has a wide 26-36T chainring range. This model is an ideal part if you're planning on converting your cross country (XC) or trail bike to a 1x drivetrain, as it will securely hold your chain in place over the rough stuff.
Ready for fast-paced MTB rides, this top guide features a hard-wearing alloy backplate with a composite top guide. This makes it perfect for withstanding all the abuse associated with aggressive off-road adventures. Nukeproof has also equipped this trail-ready model with a soft rubber co-moulded into it. This also reduces wear and noise from your chain and increases its longevity. This guide fits all bikes with an ISCG 05 mount and comes with various washers allowing you to fine tune your chainline setup. Download instructions here Click here for a Step by Step Installation Guide Please note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible. Manufacturer Part Numbers: Copper: NPCHAGUITG Black: NPCHAGUITGBLK Blue: NPCHAGUITGBLU Grey: NPCHAGUITGGRY Purple: NPCHAGUITGPUR Red: NPCHAGUITGRED
This guide features an alloy backplate with a composite top guide. This makes it more than capable of handling all the intensity as you blast across the mountain. Nukeproof has also kitted this trail-ready top guide out with a soft rubber co-moulded into it. As a result, it reduces wear and noise from your chain while also increases its longevity. MTB Top Guide with Bashguard Ready for fast-paced off-road adventures, this top guide also comes equipped with two bashguards. This allows you to choose from a guard for 32T chainrings or a guard for up to 36T chainrings, so you have everything you need. One final highlight, is it comes complete with stainless steel hardware. This means you'll enjoy its superb strength in all-weather conditions. This guide fits all bikes with an ISCG 05 mount and comes with plenty of washers to allow you to fine tune your chainline setup. Download instructions here Click here for a Step by Step Installation Guide Please note: Due to the main pivot position on Specialized Stumpjumper bikes, this chain guide is not compatible. Manufacturer Part Numbers: Copper: NPCHAGUITGWB Black: NPCHAGUITGWBBLK Blue: NPCHAGUITGWBBLU Grey: NPCHAGUITGWBGRY Purple: NPCHAGUITGWBPUR Red: NPCHAGUITGWBRED
Should this happen to be the case, the SXg has a lower bash guard that will protect your chainring if contact with trail objects were to occur.
This E-bike chain guide for Shimano Steps features a backplate that's made from a lightweight alloy and it's available in six different colour options to complement your ride. Coming equipped with a durable nylon top guide with a co-moulded rubber inset, this model also offers a reduction in noise from your chain. Its top guide has also been extended to provide you with extra protection from your chain/chainring compared to the normal ISCG version. One final highlight is it's easy to install on most bikes without having to remove your cranks. The guide is supplied with various washers allowing you to fine-tune it to suit your chain line.
Wave goodbye to that annoying chain slap rattle and say hello to a solid, reliable feeling bike that rides quietly through even the roughest terrain. The integrated bashguard on the Funn Zippa DH model prevents your chainring from coming into contact with anything that it's likely to encounter on downhill trails, ensuring ultimate protection for maximum fun.
Perfectly suited to the increasingly popular all-mountain segment, the mrp amg v2 model shares the freshly updated "TR" upper guide with the 1x unit, and adds MRP's patented integrated skid. This All-Mountain Guide (AMG) is a great choice for 120-150mm (5-6") travel bikes when used with the latest tensioned rear derailleurs or on its own for shorter-travel trail bikes or hardtails that require bash protection. The contact-free, "upper-only" chain retention on the MRP AMG V2 alloy chain guide means it's virtually silent and completely drag-free when pedalling. The patented integrated skid will protect your crank and chainring and prevent the chain from ever contacting and potentially damaging your expensive frame. Please note: The 32-38t ISCG option comes as a plain black chain guide without MRP logos. Image is for demonstration purposes only.
As the AMg guide has no chain retention device that is rarely needed with modern narrow/wide chainrings and clutch derailleurs, this guide is drag free when pedalling and still provides trail obstacle protection, as the skid plate is still present.
Ditch your single ring and fall back into the loving embrace of two-by technology. The TRS Dual Guide will keep your 2X system silently secure on the most demanding rides. Run with the included standard lower slider, it's perfect for those riders who want the lightest dual ring chain retention possible.
The MRP 1x chain guide is the result of 20+ years of chainguide experience with the help of design cues from its V3 series. This model boasts a stiff and light glass-filled composite backplate alongside a durable nylon upper guide to add major chain retention to your 1x10, 11 or 12-Speed drivetrain for outstanding quality and performance.