The E*Thirteen Helix Plus 12-speed cassette features an industry-leading 556% Range. Delivering more range with less weight, with the Helix Plus tipping the scales at 406g. All whilst being cross-compatible with SRAM™ and Shimano™ drivetrains. The two-piece design is engineered explicitly for E-bike durability too.This 9-50T combination is the hot set up for your 12 Speed MTB and allows for a 2-tooth smaller front chainring, shorter chain length, more clearance and range with our exclusive 9-tooth smallest cog. A smaller overall cassette means less overall weight. Future proof your bike and save weight and cash with the Helix Plus cassette.Key Features:Compatible with SRAM™ and Shimano™ 12-speed drivetrains,Improved shifting performance, including Shimano™ 12 Speed compatibility,The improved interface between steel and aluminium clusters,E*spec uprated for E-bike use,2-piece design allows for replaceable aluminium cogs.Specification:Freehub Mount: XD™ and XDR™ Drivers Only,Material: 2 aluminium cogs, 10 steel cogs.,Range: 556%,Size: 9-50T: 9, 11, 13, 15, 17, 20, 23, 27, 31, 36, 42, 50,Speeds: 12 Speed,Weight: 406g.Rider BenefitsReduces rear wheel weights, improves braking, suspension function and handlingDesigned to shift with Shimano™ and SRAM™ systems without compromise, so the rider can change components without concerne*thirteen’s wider range and 9-tooth cog allows riders to run a 2-tooth smaller chainring for more clearance and reduced weightsXD™ driver required.
Campagnolo’s considerations behind the available gearing ratios smooth shifting is fundamental to the design of Ekar’s gravel and all-road specific cassettes. 13 sprockets make the logic of a Road 1 x system possible. And it’s the introduction of the 9-tooth cog that makes Ekar work so perfectly for gravel and all-road riding. Not only is a wide range of gear ratios possible, but natural, progressive cadence-matching shifts are maintained, offering a uniquely satisfying ride. The range of gears offered by these cassettes match or exceed any 2x system with no wastage. Closer low gear spacing for smooth cadence progression is matched with wider high gear spacing for top end speed on a 1x13 system. Technology 13 speed: full gear range to match or exceed any 2x system with no wastage 2-piece block: blends the strength of steel and the light weight of alloy Compact: narrow design with quick changes, lightweight and improved chain security Specification Designed specifically for Ekar 1x13 groupsets Suitable for Gravel and All-Road riding Constructed from durable steel and lightweight alloy Compatible with the Campagnolo N3W freehub body Three options available: 9/36T, 9/42T, 10/44T Weights: 340g (9/36) / 390g (9/42) / 410g (10/44)
DH cassette comes with 12mm and X12 Drive side spacers to suit our freehub/cassette setup.
Hope 7 Speed Downhill Cassette and FreehubThe Hope 7 Speed DH Cassette is a short-range cassette machined from a single billet of stainless steel. Hope's unique freehub allows you to run this cassette for optimised gear steps that downhill riders want.Features:Range: 10-24tSeven sprockets machined from single billet of heat treated stainless steel11 speed spacingMaximum 20% ratio changesIntegrated chain guideBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The SRAM XG1175 cassette has an aluminium 42 tooth spocket and ten stamped steel sprockets that are held together with 123 high-strength stainless steel pins. This results in a cassette that’s light, durable and equipped with SRAM’s super wide 10-42t gear range that’s a perfect fit for any ride. It also has optimised gear steps across its entire range.
SRAM XG-1175 Mountain Bike CassetteAttack the steepest climbs with confidence with the trail-ready XG-1175 Mountain Bike (MTB) Cassette. SRAM has made this high-performance component with ten hard-wearing steel sprockets, lightweight AL-7075-T6 aluminium for the largest 42-tooth climbing sprocket and strong FULL PIN stainless steel assembly pins. Offering you a wide gear range for every riding situation, each of this cassette’s sprockets has large mud-clearing cut-outs to ensure you’ll always have crisp and accurate gear changes in the toughest riding conditions. Ready for use within MTB, cyclocross (CX) and gravel bike drivetrains, it’s compatible with all SRAM XD-type freehubs.Features: Material: 4130 Chromoly (CrMo) Steel (cog cluster), AL-7075-T6 (largest cog) Speed: 11-Speed Compatibility: SRAM 1x11-Speed MTB, CX and Gravel bike drivetrains, 11-Speed chains Freehub Compatibility: SRAM XD types Technologies: FULL PIN, XD Ratio: 10-42T:10,12,14,16,18,21,24,28,32,36,42T An integral part of the SRAM 1x drivetrain system FULL PIN technology uses ten lightweight, stamped steel cogs and one 42t aluminium cog held together with 123 high-strength stainless steel pins Super wide 10-42T gear range - a perfect fit for any ride Optimised gear steps across the entire sprocket rangeOpen design aids in mud clearance XD™ driver body creates a more stable hub connection Manufacturer's Part Number: CS-XG-1175-A1Weight: 325gBuy SRAM Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Complete Pulse LHD/RHD switch drive Cassette Wheel from Eclat. Assembled using the classic Pulse Cassette hub laced onto the Raven welded joint rim. ###section### Product Specs WHEEL SIZE:20" HUB:Eclat Pulse Cassette AXLE:14mm Chromoly Male DRIVE SIDE:Left & Right Switchable RIM:Eclat Raven Welded SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1328g / 50.38oz
Eclat cassette rear wheel featuring their proven Cortex cassette hub and their lightweight E440 rim. ###section### Product Specs WHEEL SIZE: 20" HUB: Eclat Cortex AXLE: 14mm male DRIVE SIDE: Right Side Drive RIM: Eclat E440 SPOKES: TBC NIPPLES: TBC WEIGHT: TBC
The Mankind Vision Cassette Rear Wheel features the Mankind Vision 36H 9t cassette hub with Plastic rear hub guards included and the Mankind Vision welded double wall rim. Completed with Mankind Vision Straight Spokes, Brass Nipples and the Mankind Vision Rim Band. ###section### Product Specs WHEEL SIZE:20" HUB:Mankind Vision Cassette AXLE:14mm DRIVE SIDE:Right Side Drive RIM:Mankind Vision SPOKES:Mankind Vision Straight Spokes NIPPLES:Brass WEIGHT:1090 Grams (38.45oz)
Eclat cassette rear wheel featuring their proven Cortex cassette hub and their lightweight E440 rim. ###section### Product Specs WHEEL SIZE: 20" HUB: Eclat Cortex AXLE: 14mm male DRIVE SIDE: Left Side Drive RIM: Eclat E440 SPOKES: TBC NIPPLES: TBC WEIGHT: TBC
Pre-Built Cassette BMX wheel from Shadow. The Shadow Symbol Cassette wheel pairs the value and reliability of the Shadow Symbol cassette with the rigidity and strength of the Shadow Truss rim to create an unbeatable combination. Including a replaceable plastic non drive side hub guard and laced 3 cross to the wider, 38mm Truss rim, this wheel is ready for action without any extra consideration. ###section### Product Specs WHEEL SIZE:20" HUB:Shadow Symbol Cassette AXLE:14mm Chromoly Male DRIVE SIDE:Left Side Drive RIM:Shadow Truss SPOKES:Straight Gauge NIPPLES:Brass WEIGHT:1256g / 44.32oz
Utilising Wethepeople’s patented Hybrid System technology, the Shift Freecoaster Hub is up to 33% lighter than any other freecoaster and combines the smoothness and durability of a cassette hub with the endless possibilities of a freecoaster. Paired up with their own Viper and Gong Nylon hub guards and an adjustable slack system, the Shift can also easily be converted into a cassette hub in a matter of seconds. The Shift is laced to the Trippin rim. The Trippin has been a corner stone in the éclat rim line up. Taking the proven pinned joint structure and adding a third central pin for that little bit more strength. Made out of superior 6066-T6 alloy in a smooth radiused aero version and a straight sidewall version for easy brake use. ###section### Product Specs WHEEL SIZE: 20" HUB: Eclat Shift AXLE: 14mm DRIVE SIDE: Left Side Drive RIM: Eclat Trippin SPOKES: TBC NIPPLES: TBC WEIGHT: TBC