Speed and time focused triathletes and time trial racers want an efficient and confidence-instilling braking experience and with this superb SRAM S900 set up, shorter stopping distances and deft control are assured. This is achieved by a Hydro T platform which manages scrubbing and deals with heat generation to keep your brakes working at the highest level, no matter the conditions. Easy to maintain, this disc brake comes with Bleeding Edge technology, while the Stealth-a-majig connector and Reach Adjust bar positioning make installation and comfortable positioning simple and quick.
SRAM DoubleTap Shifting DoubleTap is the flagship technology that leads SRAM’s road groupset revolution. It is a simple yet elegant and advanced system that increases performance, comfort, and weight while featuring a revolutionary shift/brake lever design. It makes changing gears easier and faster, eliminating the cumbersome and awkward engagement associated with two-lever systems. DoubleTap handles up- and downshifts in one short, sweeping motion, with minimal effort and maximum comfort no matter where you are on the bars. Lever ErgoDynamics Lever ErgoDynamics consists of three separate design elements that significantly improve your riding experience. The brake lever is slightly longer than previous DoubleTap road controls and enhances the reach of the drops, increasing comfort and control while doing so. The independent reach-adjust features on the brake and shift levers are easier to access to quickly adjust for every hand size. Finally, the shape of the hoods has been completely redesigned with a smaller diameter and higher top shape to increase the rider’s control and improve finger wrap.
This disc brake is specifically designed for road cycling and features the technology that modern riders demand. It features a sleek design that combines wireless shifting and powerful hydraulic disc braking performance, plus revolutionary eTap shift logic. Its long fibre reinforced thermoplastic (LFRT) brake lever and plastic shift lever also ensures that riders can enjoy exceptional ergonomics and braking, wherever their next road journey takes them. SRAM AXS Enabled Road Bike Disc Brake This disc brake is low on complexity, but rich with features. SRAM has equipped it with its renowned AXS wireless technology, which allows for easy personalisation and control on your road bike. Thanks to its eTap shift logic, it delivers intuitive shifting, easy setup and reliability that has been proven at the highest levels. AXS technology means personalisation is in your hands. Comfortable Shape with Reach Adjust Going the extra mile, SRAM kitted out this disc brake with an optimised hood shape to fit hands of all sizes for greater comfort and more controlled braking from any position. This model also features Reach Adjust technology, so riders can fine-tune the distance between the lever and their handlebar for a more personalised, rider-tuned feel. This makes the SRAM Rival eTap AXS Disc Brake a great choice of upgrade for enjoying super-smooth shifting operation combined with powerful hydraulic braking performance. - AXS enabled for easy personalisation - Wireless electronic eTap shift logic for intuitive shifting, easy setup and reliability - Optimised hood shape fits a wider range of hand sizes - Textured shift paddles and hoods for control and comfort - Reach Adjust to personalise fit for more hand sizes Technologies: AXS Enabled: AXS is SRAM’s bike component integration system that connects electronic bicycle components and software. Control: AXS lets you connect your AXS-enabled components to a mobile app, where you can assign custom actions to your controls. Everything speaks the same language, and you can even combine road and mountain bike parts to build the party bike of your dreams. Personalise: Wireless controls open the door to new levels of customisation. With AXS, you can personalise your component behavior to match your riding style and preferences. Turn on enhanced shifting modes, or reassign shifting actions. Measure: The AXP Mobile App and AXS Web allow you to monitor your bike’s performance and readiness. It’s an easy way to keep tabs on your battery levels—including the CR2032 batteries in eTap shift levers—and keep AXS component firmware up-to-date. AXS Web analyses your ride files specific to shifting, gear use, power zones, and tyre pressure, so that you can quickly and easily learn more about how your bike is working for you and consider adjustments.
These SRAM Doubletap hoods are ideal for replacing the old or worn-out ones on your Doubletap road bike gear shifters. These are compatible with SRAM Apex, Rival, Force and Red brakes (Gen 1). Manufacturer's Part Number: 00.7915.042.000
All set for hitting your local mountain bike (MTB) trails, this hydraulic disc brake is equipped with a robust aluminium lever body and a forged aluminium caliper, which makes it ready for the most demanding of trail adventures. Another highlight is its tool-less adjustable lever reach that allows you to easily set it up to match your hand size or riding style. This makes it comfortable to pull as you dive into corners and drops at speed, while also keeping your momentum flowing. Coming complete with SRAM's Bleeding Edge technology, this model also allows for simple DOT 4 fluid installation and maintenance when required. Hydraulic Disc Brake with SwingLink Technology We spend a lot of time obsessing over feeling, and SwingLink technology brings SRAM's best research and development to life. The G2 RS offers riders the joys of SwingLink — getting brake pads to the rotor fast, then moderating pressure with smooth modulation. It’s one small movement for your finger, one monumental upgrade to your braking. Power Reserve Geometry Your fingers pull in a straight line, but brake levers move in an arc. Bottom line: Your fingers typically want to slip off the ends of the levers as you pull. SRAM designed all of its brakes with the industry's lowest X Factor (that's the distance from the centre of the handlebar to the centre of the lever's pivot). That reduces the lever's inward travel, creating an arc that's closer to your fingers' natural motion and more power is delivered to the brake lever. And, the cool part is, every SRAM and Avid brake lever has it. Bleeding Edge With this new caliper fluid circuitry, the bleed port has been moved to the bottom of the caliper, and all four piston bores can communicate. This way, during bleeding fluid naturally fills the caliper, resulting in an easier, more consistent bleed. S4 Light-Weight 4-Piston Caliper The all new S4 Caliper features four Machined and Moly-coated aluminium pistons for consistent rollback and easy set-up, Heat shield insulation and Bleeding Edge porting and adapter technology for easy bleeds. SwingLink Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, the leverage rate curve is flat and smooth, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. We spend a lot of time obsessing over feel, and SwingLink technology brings SRAM's best R&D to life. The G2 RS offers riders the joys of SwingLink — getting brake pads to the rotor fast, then moderating pressure with smooth modulation. It’s one small movement for your finger, one monumental upgrade to your braking. - Power organic pads give riders both feel and bite. - Bleeding Edge for simple fluid installation and maintenance. - Tools-free reach adjust for quick personalisation. Please note: Mounting clamps are not included with this item but are available separately. Additional Item Top Features: Pistons: 4 pistons Single or Pair: Single Reach Adjust: Tool-free reach adjust Caliper Bleed Port: Bleeding Edge Lever Pivot: Bushing Hydraulic Fluid: DOT 4 Weight: 490g Technologies: SWINGLINK: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. Many brake systems minimize deadband – but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Reach Adjust: Brake lever fit and feel is a personal thing. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone, regardless of hand size.
All set for hitting your local mountain bike (MTB) trails, this hydraulic disc brake is equipped with a robust aluminium lever body and a forged aluminium caliper, which makes it ready for the most demanding of trail adventures. Another highlight is its tool-less adjustable lever reach that allows you to easily set it up to match your hand size or riding style. This makes it comfortable to pull as you dive into corners and drops at speed, while also keeping your momentum flowing. Coming complete with SRAM's Bleeding Edge technology, this model also allows for simple DOT 4 fluid installation and maintenance when required. Hydraulic Disc Brake with SwingLink Technology We spend a lot of time obsessing over feeling, and SwingLink technology brings SRAM's best research and development to life. The G2 RS offers riders the joys of SwingLink — getting brake pads to the rotor fast, then moderating pressure with smooth modulation. It’s one small movement for your finger, one monumental upgrade to your braking. - Power organic pads give riders both feel and bite. - Bleeding Edge for simple fluid installation and maintenance. - Tools-free reach adjust for quick personalisation. Additional Item Top Features: Pistons: 4 pistons Single or Pair: Single Reach Adjust: Tool-free reach adjust Caliper Bleed Port: Bleeding Edge Lever Pivot: Bushing Hydraulic Fluid: DOT 4 Weight: 490g Please Note: This brake is designed for use with a Matchmaker clamp (combined with a gear shifter) so does not come with its own bar clamp. These bar clamps are sold separately. Please click here if you wish to purchase this in addition to the brake. Technologies: SWINGLINK: Squeeze a SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. Many brake systems minimize deadband – but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. Reach Adjust: Brake lever fit and feel is a personal thing. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone, regardless of hand size. Manufacturer's Part Numbers: 00.5018.178.000 Black Diffusion Front RH Front-RH 950mm 00.5018.178.001 Black Diffusion Rear LH Rear-LH 2000mm
These Cane Creek Crosstop brake levers are compatible with caliper or cantilever brakes. All Cane Creek components feature subtle refinements that show their mettle in the most demanding conditions, from one season to the next. Cane Creek products deliver immediately noticeable improvements in ride quality and performance. Manufacturer's Part Number: BL3100K Black 31.8mm
Whether you're into time trial or triathlon racing, these Cane Creek 200TT brake levers are perfect for bikes with a front-end combination of a bullhorn and clip-on aero bar. The internal wedge mount clamps securely to the end of bullhorn-style bars, putting the lever in a natural, easily accessible position. The ergonomic design helps you maintain your natural hand position for enhanced brake control. Cold forged aluminium is used for the 200TT brake levers, while the bracket is die-cast aluminum. An ergonomically designed rubber end plug provides a comfortable hand/thumb position. Manufacturer's Part Number: BL2000K
These superb brakes feature TPA technology for tool-less pad wear adjustment and are completed by EBT technology for super easy bleeding. Additionally, their flip-flop design provides super-fast installation while its lightweight 2-finger aluminium lever blade makes it a master of its class. This is ideal for replacing your old or existing model, so you can enjoy smooth and powerful braking performance.
The braking force of 4 pistons provides high stability to ensure your s-pedelec is equipped to stop safely and reliably. It is much more than just a basic brake; it features a mechanical switch in the brake bracket which activates the brake light before deceleration begins, and also controls the drive cut-out for maximum safety too.
This genuine Magura brake lever has been specially designed for road cyclists. Ideal for replacing your existing 2-finger lever, this top-notch model has been made from strong and durable aluminium construction for superb braking performance.
This very comfortable, ergonomic lever is constructed from carbotecture that's extremely light, impact resistant and shatter-proof, so you can enjoy a maximum braking performance. Additionally, it features the highest degree of bending strength and has been used in both bike and motorsports components today. Finally, this is a superb replacement for your old model and its better material will meet the demands placed on today's high-tech brakes.