Key Features: Great value fully bled hydraulic disc brake with easily adaptable post-style calliper,Fully bled lever and calliper comes without adapters or rotors giving you the freedom to customise to suite your bike,Can be used with the revolutionary Center Lock rotor system which fits easily to Center Lock compatible hubs; alternatively conventional 6-bolt rotors can be used all in a choice of 160 mm, 180 mm,Mineral oil brake fluid is non-corrosive and less hazardous than conventional hydraulic brake fluid,For use with resin pads only.
These Cane Creek Crosstop brake levers are compatible with caliper or cantilever brakes. All Cane Creek components feature subtle refinements that show their mettle in the most demanding conditions, from one season to the next. Cane Creek products deliver immediately noticeable improvements in ride quality and performance. Manufacturer's Part Number: BL3100K Black 31.8mm
Cane Creek Crosstop Cyclocross Brake LeversInstalled in the middle of your cyclocross (CX) bike’s handlebars, the Crosstop Cyclocross Brake Levers give you reliable stopping power when riding upright. Cane Creek has constructed them with cold-forged aluminium levers and die-cast brackets, meaning they’re ready for the toughest courses and most challenging terrains. Created to work in line with your drop bar levers, they are made with either a 26mm clamp for classic bars or a 31.8mm type for modern types.Features:Material: Cold-forged aluminium lever, die-cast bracketFinish: Anodised black with laser-etched logosCompatibility: Road type calipers or cantilever brakesClamp Diameter: Separate 26mm and 31.8mm optionsSingle or Pair: PairUse: Cyclocross (CX)Cables Included: NoMachined aluminium lever and bracket (hinged for assembly ease)Tidy 2.5mm hex bolt takes up tolerances in pivotWeight: 96g (pair)Please Note: Not compatible with V-brakes.Buy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The sensible choice for Cyclocross bikes. Designed to work in-line with traditional drop bar shifter/levers to give an additional braking control position on the top of handlebars. Compatible with calliper or cantilever brakes and available in two sizes to fit 26.0mm and 31.8mm handlebarsA neat 2.5mm hex bolt takes up tolerances in the pivot, eliminating 'slop' in the lever actionMachined aluminium or carbon leverAluminium 87g.
Specification:MT5,black,1- finger aluminium lever,reach witch tool,compatible with: MT5, MT4,PU = 1 piece.
This superb brake lever is an ideal replacement for your old or worn-out existing model. Additionally, its strong one finger aluminium construction is perfect for sharp corners and keeping your ride under control.
Magura HC 1-Finger MTB Brake Lever BladeThis superb brake lever is an ideal replacement for your old or worn-out existing model. Furthermore, its strong one finger aluminium construction is perfect for tackling sharp corners and keeping your ride under control.Features: Material: Aluminium Compatibility: Magura Use: Road Lever type: 1 finger Genuine Magura replacement partBuy Magura Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The BL-MT500 brake lever delivers high-powered mountain biking performance and I-spec II compatibility.Great value easy to use hinged design brake lever gives you plenty of power at your finger tipsShort stroke Servo-Wave mechanism for quick pad engagement and more power for aggressive ridingOpening clamp band design with hinge for easy Installation and removalAlloy brake lever for secure and dependable brakingFor use with mineral oil onlyAn increase in pad clearance at the calliper has enabled Shimano to use their proven Servo Wave technology. As the brake lever is pulled a cam linkage enables rapid pad to rotor engagement, at the point of contact the cam moves across multiplying the leverage ratio and increasing the stopping power. Adjustable free stroke enables you to fine tune the amount of lever pull before pad and rotor engagement.
The BL-MT500 brake lever delivers high-powered mountain biking performance and I-spec II compatibility.Great value easy to use hinged design brake lever gives you plenty of power at your finger tipsShort stroke Servo-Wave mechanism for quick pad engagement and more power for aggressive ridingOpening clamp band design with hinge for easy Installation and removalAlloy brake lever for secure and dependable brakingFor use with mineral oil onlyAn increase in pad clearance at the calliper has enabled Shimano to use their proven Servo Wave technology. As the brake lever is pulled a cam linkage enables rapid pad to rotor engagement, at the point of contact the cam moves across multiplying the leverage ratio and increasing the stopping power. Adjustable free stroke enables you to fine tune the amount of lever pull before pad and rotor engagement.
All set for adventures on your road bike, these Shimano Sora R3000 levers feature a robust aluminium construction which makes them great at handling all the sudden knocks and bumps that come with cruising around the city and further afield. Coming complete with some of Shimano's finest technologies, this version offers maximum comfort, satisfaction and effortless urban riding. Adjustable Flat Bar Brake Lever Keeping your momentum flowing, these road-focused flat bar brake levers utilise Shimano Linear Response technology to reduce friction in your caliper, lever and cables. This means you'll enjoy improved responsiveness and modulation on your daily commute or journey to the coffee shop. One final highlight is these are kitted out with an adjustable reach, so you can easily fine-tune the distance between your handlebar and each lever for a more customised feel. Technologies: Super SLR: SLR stands for SHIMANO Linear Response. The SUPER SLR design makes use of a friction-reducing mechanism in the caliper, lever and cable that improve response and modulation. Also for the lever, the SERVOWAVE mechanism is adopted to provide quick contact of shoe to rim and longer stroke from the initial braking effect for better control. SLR is the essential factor in the SHIMANO dual-pivot caliper that deliver more braking power than conventional side-pulls. Reach Adjust: Brake lever is equipped with a reach adjust mechanism. The distance from handlebar grip to lever can be adjusted to suit any hand size, type of riding and individual rider preferences.
Whether you're into time trial or triathlon racing, these Cane Creek 200TT brake levers are perfect for bikes with a front-end combination of a bullhorn and clip-on aero bar. The internal wedge mount clamps securely to the end of bullhorn-style bars, putting the lever in a natural, easily accessible position. The ergonomic design helps you maintain your natural hand position for enhanced brake control. Cold forged aluminium is used for the 200TT brake levers, while the bracket is die-cast aluminum. An ergonomically designed rubber end plug provides a comfortable hand/thumb position. Manufacturer's Part Number: BL2000K