Rotor BB30 to 24mm Steel Road Bottom BracketAn ingenious design, this converter bottom bracket enables you to use chainsets with 24mm spindles (eg. Shimano) in a frame with a BB30 bottom bracket shell. It can be used in both MTB frame and road bike frames and with its labyrinth no contact seals, it delivers smooth, unrestricted rotation and is protected from dirt and wet weather.Features: Material: T6 heat treated 7075 Aluminium cups Size: for BB30 shell only Axle/Spindle Compatibility: 24mm Threaded interface ensures perfect bearing alignment Provides airtight seal from frame contaminants and allows for self-installation /extraction For all Rotor and Shimano compatible 24mm cranks Available only with steel bearings in black Part Number: C04-015-01010-0 Weight: Steel (black): 122.5gPlease Note: This product is not suitable for use with Cannondale frames with "BB30A" shells, these frames require a specific chainset and bottom bracket systemBuy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor PF46 Steel Road Bottom BracketRotor's Press Fit bottom bracket bearings are compatible with all BB90 Press-Fit system frames that are manufactured to Shimano specifications. The new, advanced non-contact Labyrinth seals yield a buttery-smooth spin with unparalleled protection against dust, water and mud.Ultra rigid plastic caps give high compression and deformation resistance, facilitating crisp shifting. Available with steel or ceramic bearings. Constructed of CNC machined 7075 aluminium. Adaptor cups and bearings for the installation of 24mm cranks in BB30 PF frames.Features: Adaptor cups and bearings for the installation of 24mm cranks in BB30 PF frames.Steel (black) 137g.Anodized and lasered Aluminium cups.Lathe & CNC produced anodized AL cups with T6 annealing.High quality silicone external seals and inner seal tube prevent bearing contamination, increasing BB service life.Buy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Rotor PF46 EVO386 Steel Bottom BracketRotor's Press Fit bottom bracket bearings are compatible with all BB90 Press-Fit system frames that are manufactured to Shimano specifications. The new, advanced non-contact Labyrinth seals yield a buttery-smooth spin with unparalleled protection against dust, water and mud.Ultra rigid plastic caps give high compression and deformation resistance, facilitating crisp shifting. Available with steel or ceramic bearings. Constructed of CNC machined 7075 aluminium.Features:For use in BB386EVO 46mm systems to convert down to 24mm axle systems.This can be used with Rotor 3D & Agilis cranks, and all shimano 24mm axle systems.Steel (black) 111g.Anodized and lasered Aluminium cups.Lathe & CNC produced anodized AL cups with T6 annealing. High quality silicone external seals and inner seal tube prevent bearing contamination, increasing BB service life Buy Rotor Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features: Custom 19 ball flanged retainer bearings,Allow the use of a 30mm spindle with Shimano press fit shells without decreasing ball bearing size,Bearings races are fully coated for improved corrosion resistance,Bearings are factory filled with Phil wood grease,Includes an industry exclusive inner sleeve to protect against water ingress.
Key Features:Chrome steel 6805 bearings.,Fully CNC machined external cups.,Co-moulded bearing shields.,Wave washer spacers included.,BSA threading: 1.37" x 24T.,Fits 68/73mm wide brackets.,Fits 24mm spindle cranksets.,Cup tool: 16-notch 44mm OD (BTL-27L).,Made of: 7075 T6 aluminium..
The Park Tool BB press removes and install the bearings and bearing units used in BB86, BB92, Shimano Press Fit, SRAM Press Fit GXP, Race Face Press Fit and other press fit bottom bracket systems using the nominal 24mm spindle. The Park Tool bb tool includes a bearing removal tool, which slides through and expands behind the bearing (like a head cup remover) so it can be tapped out with a hammer. The BBT-90.3 also includes two installation bushings (#669). Use the bushing in conjunction with an HHP-2 or HHP-3 Bearing Cup Press (sold separately) to press the bearings into the frame. Click here to see the user instruction manual for this product
A double-sided B.B. Socket born out of the increasing popularity of 30mm crank spindles.Made from CNC machined 7075 aluminium it's durable and provides very precise engagement with all the notches of the bottom bracket so won't chew up the bottom bracket.Compatible with Rotor® BSA 30, RaceFace® Cinch, Zipp® Vuma, Hawk Racing® BB3086 or other 12-notch Ø46.5mm external bearing bottom bracket cups.Compatible with FSA® EVO 386 or other 16-notch Ø48.5mm external bearing bottom bracket cups.Specification:Functions: 1/2" Dr.,Material: Alloy steel..
DMR Axe Bottom Brackets to fit the below bottom bracket standards. Both press fit BB's require the specific BB tool. Before fitting the BB92 BB, you must check your frame is within the required tolerances using the BB92 gauge. Please Note: The axe crank uses a specific 30mm bottom bracket axle and is only compatible with the Axe Bottom Bracket. Other 30mm crank systems and BB's are not cross compatible.BB92 pressfit68/73mm BSA threadedPlease note: Image for illustration purposes only
Replacement External Bearing BB to fit FSA Gamma Drive MegaExo compatible cranks.Key Features:Oversized cartridge bearings,Forged steel and CNC machined external cups,Composite centre sleeve with double o-ring seals,Weight: 200g,Spindle: 19mm,Shell: 68, 73mm.
There aren’t many times a replacement part actually improves your bike but put one on your bike and you’ll wonder why you didn’t install a NINJA sooner. The bearings are housed in an alloy shell and wrapped with plastic and fibre. This fusion of the three materials provides the bearings a solid platform to sit on and extends their lives. A lot of people would be satisfied with this, but they went even further by extending the alloy shell so the right and left sides lock together. This locks the frame, cranks and bottom bracket together and provides unparalleled stiffness.
There aren’t many times a replacement part actually improves your bike but put one on your bike and you’ll wonder why you didn’t install a NINJA sooner. The bearings are housed in an alloy shell and wrapped with plastic and fibre. This fusion of the three materials provides the bearings a solid platform to sit on and extends their lives. A lot of people would be satisfied with this, but they went even further by extending the alloy shell so the right and left sides lock together. This locks the frame, cranks and bottom bracket together and provides unparalleled stiffness.
Token Ninja Cervelo Shimano Bottom BracketToken Ninja Cervel Shimano Bottom BracketThis superb bottom bracket is specifically designed for use with BBBRight Cervel frames. Its high-quality bearings are housed in an alloy shell and wrapped with plastic and fibre for extra durability. Additionally, this fusion of three materials provides the bearings with a solid platform to rest on while extending their longevity. To top it off, the extension of its alloy shell locks your frame, cranks and bottom bracket together and provides you with unparalleled stiffness.Features: Material: Shell: Alloy, Plastic and Fibre Compatibility: BBBRight Cervel frames Spindle: Shimano, 24mm Extended shell which locks you frame, cranks and bottom bracket together Ultra-stiffBuy Token Components from Chain Reaction Cycles, the World's Largest Online Bike Store.